topic Re: smart forms - Urgent in Application Development and Automation Discussions

smart forms - Urgent

Former Member — Mon, 23 Jul 2007 18:11:32 GMT

Hi all,

How to send email in SMARTFORMS?

can any one tell as it is urgent requrement.

thanks

revanth

Re: smart forms - Urgent

Former Member — Mon, 23 Jul 2007 18:18:36 GMT

Check the code....

Summury: Converting the smartfrom to PDF is process of 3 simple steps.

Calling the Smart form, then it returns the OTF data in Return. 
Converting the OTF data into required format using the Function Module CONVERT_OTF_2_PDF. 
Download the File 
*&---------------------------------------------------------------------*
*& Report  ZTEST_NREDDY_PDF
*&
*&---------------------------------------------------------------------*
*&
*&
*&---------------------------------------------------------------------*

REPORT  ZTEST_NREDDY_PDF.

DATA: it_otf   TYPE STANDARD TABLE OF itcoo,
      it_docs  TYPE STANDARD TABLE OF docs,
      it_lines TYPE STANDARD TABLE OF tline,
      st_job_output_info      TYPE ssfcrescl,
      st_document_output_info TYPE ssfcrespd,
      st_job_output_options   TYPE ssfcresop,
      st_output_options       TYPE ssfcompop,
      st_control_parameters   TYPE ssfctrlop,
      v_len_in                TYPE so_obj_len,
      v_language              TYPE sflangu VALUE 'E',
      v_e_devtype             TYPE rspoptype,
      v_bin_filesize          TYPE i,
      v_name                  TYPE string,
      v_path                  TYPE string,
      v_fullpath              TYPE string,
      v_filter                TYPE string,
      v_uact                  TYPE i,
      v_guiobj                TYPE REF TO cl_gui_frontend_services,
      v_filename              TYPE string,
      v_fm_name               TYPE rs38l_fnam.

CONSTANTS c_formname          TYPE tdsfname VALUE 'ZTEST'.

CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
  EXPORTING
    i_language    = v_language
    i_application = 'SAPDEFAULT'
  IMPORTING
    e_devtype     = v_e_devtype.

st_output_options-tdprinter = v_e_devtype.
*st_output_options-tdprinter = 'locl'.

st_control_parameters-no_dialog = 'X'.
st_control_parameters-getotf = 'X'.

*.................GET SMARTFORM FUNCTION MODULE NAME.................*

CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
  EXPORTING
    formname           = c_formname
  IMPORTING
    fm_name            = v_fm_name
  EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

*...........................CALL SMARTFORM............................*

CALL FUNCTION v_fm_name
  EXPORTING
    control_parameters   = st_control_parameters
    output_options       = st_output_options
  IMPORTING
    document_output_info = st_document_output_info
    job_output_info      = st_job_output_info
    job_output_options   = st_job_output_options
  EXCEPTIONS
    formatting_error     = 1
    internal_error       = 2
    send_error           = 3
    user_canceled        = 4
    OTHERS               = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.

*.........................CONVERT TO OTF TO PDF.......................*

  CALL FUNCTION 'CONVERT_OTF_2_PDF'
    IMPORTING
      bin_filesize           = v_bin_filesize
    TABLES
      otf                    = st_job_output_info-otfdata
      doctab_archive         = it_docs
      lines                  = it_lines
    EXCEPTIONS
      err_conv_not_possible  = 1
      err_otf_mc_noendmarker = 2
      OTHERS                 = 3.
  IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  ENDIF.

*........................GET THE FILE NAME TO STORE....................*

  CONCATENATE 'smrt' '.pdf' INTO v_name.

  CREATE OBJECT v_guiobj.
  CALL METHOD v_guiobj->file_save_dialog
    EXPORTING
      default_extension = 'pdf'
      default_file_name = v_name
      file_filter       = v_filter
    CHANGING
      filename          = v_name
      path              = v_path
      fullpath          = v_fullpath
      user_action       = v_uact.

  IF v_uact = v_guiobj->action_cancel.
    EXIT.
  ENDIF.

*..................................DOWNLOAD AS FILE....................*
  MOVE v_fullpath TO v_filename.

  CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      bin_filesize            = v_bin_filesize
      filename                = v_filename
      filetype                = 'BIN'
    TABLES
      data_tab                = it_lines
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception  = 20
      control_flush_error     = 21
      OTHERS                  = 22.
  IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  ENDIF.
ENDIF.

also check the link below.

Cheers

Re: smart forms - Urgent

Former Member — Mon, 23 Jul 2007 18:19:21 GMT

Hi,

Use 'SO_NEW_DOCUMENT_SEND_API1 F.M

Please go through the code.

data declaration

c_u(1) VALUE 'U', "Value U

c_int(3) VALUE 'INT', "Value Int

c_saprpt(6) VALUE 'SAPRPT', "Heading

c_f(1) VALUE 'F', "Value F

c_raw(3) VALUE 'RAW'. "Doc Type

getting the data from TVARV

CONCATENATE 'CBSI_FILE_NAME' '0227' INTO l_var_name SEPARATED BY '_'.

CALL FUNCTION 'Z_GET_TVARV_ENTRIES'

EXPORTING

i_name = l_var_name

i_type = 'P'

I_MSGTY =

IMPORTING

e_parameter = l_file.

TABLES
t_tvarv =

p_file = l_file .

Sending email

PERFORM send_file_as_email_attachment

USING v_email

'SM0003 Control Total Data'

' '.

&----

Send email

----

-->P_GV_EMAIL Email id
-->P_TEXT_003 Subject
-->P_TEXT_003 Subject
-->P_6200 text

----

FORM send_file_as_email_attachment

USING p_email TYPE somlreci1-receiver

p_mtitle TYPE sodocchgi1-obj_descr

p_filename TYPE so_obj_des

p_attdescription TYPE so_obj_nam.

*Local varibales

DATA: lv_mtitle TYPE sodocchgi1-obj_descr,

lv_email TYPE somlreci1-receiver,

lv_attdescription TYPE so_obj_nam ,

lv_attfilename TYPE so_obj_des ,

lv_sent_all TYPE sonv-flag.

*move values

it_attach[] = it_output[].

lv_sent_all = c_x.

lv_email = p_email.

lv_mtitle = p_mtitle.

lv_attdescription = p_attdescription.

lv_attfilename = p_filename.

Fill the document data.

it_docchange-doc_size = 1.

Populate the subject/generic message attributes

it_docchange-obj_langu = sy-langu.

it_docchange-obj_name = c_saprpt.

it_docchange-obj_descr = lv_mtitle .

it_docchange-sensitivty = c_f.

Fill the document data and get size of attachment

READ TABLE it_attach

INDEX v_chr_entries

TRANSPORTING NO FIELDS.

it_docchange-doc_size =

( v_chr_entries - 1 ) * 255 + STRLEN( it_attach ).

it_docchange-obj_langu = sy-langu.

it_docchange-obj_name = c_saprpt.

it_docchange-obj_descr = lv_mtitle.

it_docchange-sensitivty = c_f.

Describe the body of the message

CLEAR wa_objpack.

REFRESH it_objpack.

wa_objpack-transf_bin = space.

wa_objpack-head_start = 1.

wa_objpack-head_num = 0.

wa_objpack-body_start = 1.

DESCRIBE TABLE it_message LINES v_objpackbody.

wa_objpack-doc_type = c_raw.

APPEND wa_objpack

TO it_objpack.

Create attachment notification

wa_objpack-transf_bin = c_x.

wa_objpack-head_start = 1.

wa_objpack-head_num = 1.

wa_objpack-body_start = 1.

DESCRIBE TABLE it_attach LINES v_objpackbody.

wa_objpack-obj_descr = lv_attdescription.

wa_objpack-obj_name = lv_attfilename.

wa_objpack-doc_size = wa_objpack-body_num * 255.

APPEND wa_objpack

TO it_objpack.

Add the recipients email address

REFRESH it_reclist.

LOOP AT it_mailid .

wa_reclist-receiver = it_mailid-low.

wa_reclist-receiver = 'kishor.thakur@ge.com'.

wa_reclist-rec_type = c_u.

wa_reclist-com_type = c_int.

wa_reclist-notif_del = c_x.

wa_reclist-notif_ndel = c_x.

APPEND wa_reclist

TO it_reclist.

CLEAR wa_reclist.

ENDLOOP.

IF 1 = 2.

ENDIF.

CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'

EXPORTING

document_data = it_docchange

document_type = c_raw

put_in_outbox = c_x

commit_work = c_x

IMPORTING

sent_to_all = lv_sent_all

TABLES

object_content = it_attach

receivers = it_reclist

EXCEPTIONS

too_many_receivers = 1

document_not_sent = 2

document_type_not_exist = 3

operation_no_authorization = 4

parameter_error = 5

x_error = 6

enqueue_error = 7

OTHERS = 8.

IF sy-subrc NE 0.

MESSAGE e114 ."Unable to send An Email with Session Log.

ENDIF. "IF sy-subrc NE 0.

ENDFORM. "send_file_as_email_attachment

Thanks,

Sudhakar

Re: smart forms - Urgent

Former Member — Mon, 23 Jul 2007 18:19:42 GMT

Hi,

refer this threads:

<u>

Thanks

Mahesh