topic Re: Address........EndAddress in Application Development and Automation Discussions

Address........EndAddress

Former Member — Mon, 30 Jul 2007 09:38:43 GMT

what is the use of Address........EndAddress control command in text elements of script?

Re: Address........EndAddress

Former Member — Mon, 30 Jul 2007 09:41:59 GMT

hi,

The ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter. The reference fields are described in the structures ADRS1, ADRS2, or ADRS3, depending on the type of address. Either direct values or symbols may be assigned to the parameters.

Syntax:

/: ADDRESS [DELIVERY] [TYPE t] [PARAGRAPH a] [PRIORITY p] [LINES l]

/: TITLE title

/: NAME name1[,name2[,name3[,name4]]]

/: PERSON name of natural person [TITLE form of address]

/: PERSONNUMBER number of the personen

/: DEPARTMENT department

/: STREET street name HOUSE house number

/: LOCATION additional location information

/: POBOX po box [CODE post code / zip code] [CITY city]

/: POSTCODE post code / zip_code

/: CITY city1[,city2]

/: NO_UPPERCASE_FOR_CITY

/: REGION county / state

/: COUNTRY recipient country [LANGUAGE language code]

/: COUNTRY_IN_REC_LANG

/: LANG_FOR_COUNTRY language key

/: FROMCOUNTRY sender country

/: ADDRESSNUMBER address number

/: ENDADDRESS

The parameter values contain both formatting and address information. The address data are formatted for output according to the data in the following parameters:

TYPE

FROMCOUNTRY

COUNTRY

LANGUAGE

PRIORITY

DELIVERY

LINES

For more information, see the documentation for the SAP function module ADDRESS_INTO_PRINTFORM.

If DELIVERY is not specified and if a POBOX is specified, then the POBOX is used in an address instead of a STREET.

Parameters

DELIVERY

Means that the address should be formatted as a complete delivery address, using the street name and number rather than the P.O. Box.

TYPE

Specifies the type of address. The following types are possible:

Normal address (ADRS1). This is the address of a company or organization. It corresponds to the address structure that is expected in most SAP applications.

Private or personal address (ADRS2). This is the address of a natural person, a private or home address.

Company addressDienstadresse (ADRS3) with contact person. This is the address of a colleague or contact within a company or organization. The company name should be specified in the TITLE and NAME fields; the ATTN: contact person should be named in PERSON and TITLE.

Should you enter another address type or leave the field blank, then type 1 is used for formatting.

PARAGRAPH

Specifies the paragraph format to be used for outputting the address. If this parameter is not given, the address will be output using the default paragraph format.

PRIORITY

Specifies which of the address lines may be omitted should this be necessary. Any combination of the following codes may be specified. The order in which you list the codes determines the order in which address lines are left out.

The codes are as follows:

A Title

P Mandatory empty line

4 Name4

3 Name3

R Region

T Neighborhood, administrative section of a city (CITY2)l

D Department

L Country name

C Post code or zip code

2 Name2

B P.O. Box (Japan only)

S Street name and number or P.O. Box, depending upon DELIVERY parameter

N Name and form of address of natural person (PERSON and TITLE)

I Location information in LOCATION

O City

LINES

Specifies how many lines may be used for formatting the address. If there are too few lines available to allow all the address data to be formatted, then the data specified in the PRIORITY parameter are omitted. If there is no LINES parameter and if this command is in a form window of a type other than MAIN, then the number of lines available for formatting the address are automatically calculated based on the current output position and the size of the window.

TITLE

Title or form of address. Used only with addresses of types 1 and 3.

NAME

Up to four names may be given, separated by commas. Used only with addresses of types 1 and 3.

PERSON

Name of the addressee. Used only for addresses of type 2 (private or personal address) or type 3 (company contact address). In type 3 addresses, use PERSON for the name of your contact person: ‘Attn: Mr. Jeffries’. The name fields should be used for the company address.

PERSONNUMBER

Personal number. Can be used only for address types 2 or 3 (private or personal address).

TITLE (with PERSON)

Title of the addressee. Can be used only for address types 2 or type 3 (private or personal address).

DEPARTMENT

Department of the addressee. Can be used only for address type 3 (company address).

STREET

Street name.

HOUSE

House number for the corresponding street.

LOCATION

Additional location information, such as the building, "Upstairs Apartment" and so on. Appears on its own line in the address.

POBOX

P. O. Box

CODE

The post code / zip code of the P. O. Box if this differs from the post code / zip code of the recipient.

CITY

The city in which the destination P.O. Box is located if this differs from the city of the recipient.

POSTCODE

Post code / zip code of the recipient.

CITY

Addressee’s city. city1 is expected to be the city; city2 is the neighborhood or administrative section, if required.

NO_UPPERCASE_FOR_CITY

Default = NO_UPPERCASE_FOR_CITY ‘ ‘

Usually, the system prints the city and country names of foreign addresses in uppercase ( NO_UPPERCASE_FOR_CITY ‘ ‘ ).

You can use this parameter to force the system to output city and country name unchanged (uppercase/lowercase).

( NO_UPPERCASE_FOR_CITY ‘X’ )

REGION

This allows an administrative region, county, province, or state etc. to be specified.

COUNTRY

Specifies the recipient country, i.e. the country according to whose postal conventions the address is to be formatted.

COUNTRY_IN_REC_LANG

This flag tells the system to use the recipient language for the country name.

( COUNTRY_IN_REC_LANG ‘X‘ )

( Default: Recipient language is not used: COUNTRY_IN_REC_LANG ‘ ‘ )

LANG_FOR_COUNTRY

Default = Space

Use this parameter to explicitly set the language in which to print the country name of a foreign address. By default, the system uses the language of the sending country.

LANGUAGE

Language code of the language of the recipient country, if it differs from that of the recipient COUNTRY. Example: addresses in Switzerland. Standard SAP language codes are used; you can display these in the initial SAPscript text processing screen or in table T002.

FROMCOUNTRY

Specifies the language to be used for formatting the name of the recipient country. For most European countries, the recipient country is specified by placing the international car registration letters in front of the post code and separating them from the post code with a hyphen. You must always specify the sender country.

ADDRESSNUMBER

The number is used to index a central address file, from which the desired address is read instead of using the set of the above fields. You can find more information on this facility in the documentation for the function module ADDRESS_INTO_PRINTFORM.

You use this one parameter instead of the set of parameters described before.

/: ADDRESS

/: TITLE 'Firma'

/: NAME 'Schneider & Co', 'Finanzberatung'

/: STREET 'Kapitalgasse 33'

/: POBOX '12345' CODE '68499'

/: POSTCODE '68309'

/: CITY 'Mannheim'

/: COUNTRY 'DE'

/: FROMCOUNTRY 'DE'

/: ENDADDRESS

This produces the following output address:

Firma

Schneider & Co

Finanzberatung

Postfach 12345

68499 Mannheim

If the DELIVERY parameter is specified on the ADDRESS command, then the street name and number will appear in the address in place of the P. O. Box number.

Firma

Schneider & Co

Finanzberatung

Kapitalgasse 33

68309 Mannheim

SAPscript makes an internal call to the ADDRESS_INTO_PRINTFORM function module for formatting the address. If the result is not as expected, you should check the settings for this function module (see the function module documentation).

Regards,

Omkar.

Re: Address........EndAddress

Former Member — Mon, 30 Jul 2007 09:42:02 GMT

hi,

Usinhg this stetment you can print address of the person.

FOR EXP

/: ADDRESS PARAGRAPH PL

/: NAME &REGUH-ZNME1&, &REGUH-ZNME2&

/: STREET &REGUH-ZSTRA&

/: POSTCODE &REGUH-ZPSTL&

/: CITY &REGUH-ZORT1&

/: POBOX &REGUH-ZPFAC&

/: ENDADDRESS

In the above, PL is the paragraph format name. So what ever margins etc u give for this paragraph format will be applied to the text between ADDRESS and ENDADDRESS.

The only limitation here is u cannot assign differnt paragraph formats for differnt lines between ADDRESS and ENDADDRESS.

You can give only one paragraph format for the enrire text between ADDRESS and ENDADDRESS.

Hope this information helps.

Please reward with points if it helps.

Thanks and Regards,

ASHOK KUMAR

Re: Address........EndAddress

Former Member — Mon, 30 Jul 2007 09:42:38 GMT

Hi Debarshi

ADDRESS and ENDADDRESS is used to specify the address which will

be formatted according to the target country i.e the recipient country.

e.g. /:ADDRESS sales PARAGRAPH C

/:NAME &KNA1-NAME1&

/:STREET &KNA1-STRAS&

/:POSTCODE &KNA1-PSTLZ&

/:CITY &KNA1-ORT01&

/:COUNTRY &KNA1-LAND1&

/:FROMCOUNTRY 'DE'

/:ENDADDRESS

Regards,

Azhar

Re: Address........EndAddress

Former Member — Mon, 30 Jul 2007 09:43:51 GMT

If you want to print any address in window,then you have to use that

address

write your address

endaddress.

Thanks

Re: Address........EndAddress

Former Member — Mon, 30 Jul 2007 09:47:45 GMT

check this...

The ADDRESS - ENDADDRESS control command formats an address according to the postal convention of the recipient country defined in the COUNTRY parameter. The reference fields are described in the structures ADRS1, ADRS2, or ADRS3, depending upon the type of address. Either direct values or symbols may be assigned to the parameters.

Syntax:

/: ADDRESS [DELIVERY] [TYPE t] [PARAGRAPH a] [PRIORITY p] [LINES l]

/: TITLE title

/: NAME name1[,name2[,name3[,name4]]]

/: PERSON name of natural person [TITLE form of address]

/: DEPARTMENT department

/: STREET street name

/: LOCATION additional location information

/: POBOX po box [CODE post code / zip code] [CITY city]

/: POSTCODE post code / zip_code

/: CITY city1[,city2]

/: REGION county / state

/: COUNTRY recipient country [LANGUAGE language code]

/: FROMCOUNTRY sender country

/: ADDRESSNUMBER address number

/: ENDADDRESS

The parameter values contain both formatting and address information. The address data are formatted for output according to the data in the following parameters:

• TYPE

• FROMCOUNTRY

• COUNTRY

• LANGUAGE

• PRIORITY

• DELIVERY; and

• LINES

For more information, please also see the on-line documentation for the SAP function module ADDRESS_INTO_PRINTFORM (transaction SE37).

If DELIVERY is not specified and if a POBOX is specified, then it is used in an address instead of a STREET.

Parameters

• DELIVERY

Means that the address should be formatted as a complete delivery address, i.e. using the street name and number rather than the P. O. Box.

• TYPE

Specifies the type of address. The following types are possible:

- 1 normal address (ADRS1). This is the address of a company or organization. It corresponds to the address structure that is expected in most SAP applications.

- 2 private or personal address (ADRS2). This is the address of a natural person, a private or home address.

- 3 company address (ADRS3) with contact person. This is the address of a colleague or contact within a company or organization. The company name should be specified in the TITLE and NAME fields; the ATTN: contact person should be named in PERSON and TITLE.

Should you enter another address type or leave the field blank, then type 1 is used for formatting.

• PARAGRAPH

Specifies the paragraph format to be used for outputting the address. If this parameter is not given, the address will be output using the default paragraph format.

• PRIORITY

The codes are as follows:

- A title

- P mandatory empty line

- 4 name4

- 3 name3

- R region

- T neighborhood, administrative section of a city (CITY2)

- D department

- L country name

- C post code or zip code

- 2 name2

- B P.O. Box (Japan only)

- S street name and number or P.O. Box, depending upon DELIVERY parameter

- N name and form of address of natural person (PERSON and TITLE)

- I Location information in LOCATION

- O city

• LINES

This specifies how many lines may be used for formatting the address. If there are too few lines available to allow all the address data to be formatted, then the data specified in the PRIORITY parameter are omitted. If there is no LINES parameter and if this command is in a layout set window of a type other than MAIN, then the number of lines available for formatting the address are automatically calculated based on the current output position and the size of the window.

• TITLE

Title or form of address. Used only with addresses of types 1 and 3.

• NAME

Up to four names may be given, separated by commas. Used only with addresses of types 1 and 3.

• PERSON

Name of the addressee. Used only for addresses of type 2 (private or personal address) or type 3 (company contact address). In type 3 addresses, use PERSON for the name of your contact person: 'Attn: Mr. Jeffries'. The name fields should be used for the company address.

• TITLE (with PERSON)

Title of the addressee. Used only for addresses of type 2 or type 3 (private or personal address).

• DEPARTMENT

Department of the addressee. Used only for addresses of type 3 (company address).

• STREET

Street name, including the street number(s).

• LOCATION

Additional location information, such as the building, "Upstairs Apartment" and so on. Appears on its own line in the address.

• POBOX

P. O. Box.

• CODE

The post code / zip code of the P. O. Box if this is different than the post code / zip code of the recipient.

• CITY

The city in which the destination P.O. Box is located if this is different than the city of the recipient.

• POSTCODE

Post code / zip code of the recipient.

• CITY

Addressee's city. city1 is expected to be the city; city2 is the neighborhood or administrative section, if required.

• REGION

This allows an administrative region, county, province, or state etc. to be specified.

• COUNTRY

Specifies the recipient country, i.e. the country according to whose postal conventions the address is to be formatted.

• LANGUAGE

Language code of the language of the recipient country, if different than that of the recipient COUNTRY. Example: addresses in Switzerland. Standard SAP language codes are used; you can display these in the initial SAPscript text processing screen or in table T002.

• FROMCOUNTRY

• ADDRESSNUMBER

An address number for use in special cases, such as addressing in Japan. The number is used to index a central address file, from which the desired address is read. You can find more information on this facility in the documentation for the function module ADDRESS_INTO_PRINTFORM (transaction SE37).

/: ADDRESS

/: TITLE 'Firma'

/: NAME 'Schneider & Co', 'Finanzberatung'

/: STREET 'Kapitalgasse 33'

/: POBOX '12345' CODE '68499'

/: POSTCODE '68309'

/: CITY 'Mannheim'

/: COUNTRY 'DE'

/: FROMCOUNTRY 'DE'

/: ENDADDRESS

produces the following output address:

Firma

Schneider & Co

Finanzberatung

Postfach 12345

68499 Mannheim

If the DELIVERY parameter is specified on the ADDRESS command, then the street name and number will appear in the address in place of the P. O. Box number.

Firma

Schneider & Co

Finanzberatung

Kapitalgasse 33

68309 Mannheim

hope this helps,

Regards,

Pavan

Re: Address........EndAddress

Former Member — Fri, 03 Aug 2007 10:01:02 GMT

REPORT ZPG_SCRIPT1 .

CALL FUNCTION 'OPEN_FORM'

EXPORTING

APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'

FORM = 'ZPGSCRIPT1'

LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =

EXCEPTIONS

CANCELED = 1

DEVICE = 2

FORM = 3

OPTIONS = 4

UNCLOSED = 5

MAIL_OPTIONS = 6

ARCHIVE_ERROR = 7

INVALID_FAX_NUMBER = 8

MORE_PARAMS_NEEDED_IN_BATCH = 9

SPOOL_ERROR = 10

OTHERS = 11

IF sy-subrc <> 0.

WRITE:/'SY-SUBRC FOR OPEN FORM :',SY-SUBRC.

ENDIF.

CALL FUNCTION 'WRITE_FORM'

EXPORTING

ELEMENT = 'WIN1'

FUNCTION = 'SET'

TYPE = 'BODY'

WINDOW = 'WINDOW1'

IMPORTING
PENDING_LINES =

EXCEPTIONS

ELEMENT = 1

FUNCTION = 2

TYPE = 3

UNOPENED = 4

UNSTARTED = 5

WINDOW = 6

BAD_PAGEFORMAT_FOR_PRINT = 7

SPOOL_ERROR = 8

OTHERS = 9

IF sy-subrc <> 0.

WRITE:/'SY-SUBRC FOR WRITE FORM :',SY-SUBRC.

ENDIF.

CALL FUNCTION 'CONTROL_FORM'

EXPORTING

command = 'WIN1'

EXCEPTIONS

UNOPENED = 1

UNSTARTED = 2

OTHERS = 3

IF sy-subrc <> 0.

WRITE:/ 'SY-SUBRC FOR CONTROL FORM :',SY-SUBRC.

ENDIF.

CALL FUNCTION 'CLOSE_FORM'

IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =

EXCEPTIONS

UNOPENED = 1

BAD_PAGEFORMAT_FOR_PRINT = 2

SEND_ERROR = 3

SPOOL_ERROR = 4

OTHERS = 5

IF sy-subrc <> 0.

WRITE:/'SY-SUBRC FOR CLOSE FORM :',SY-SUBRC.

ENDIF.

do i have to use control_form in printing program if i use address endaddress in script editor?also in the command parameter what do i need to pass-ADDRESS ENDADDRESS OR THE TEXT ELEMENT?

my script editor quote was:-

/: address [paragraph p1][type 1]

/:title ' '

/:name ' '

/:street ' '

/:pobox ' ' [code ' ']

/:postcode ' '

/:city ' '

/:country 'DE '

/:FROMCONUNTRY 'EN'

/:ENDADDRESS

PLS CLARIFY

Re: Address........EndAddress

h_senden2 — Mon, 01 Oct 2007 12:18:40 GMT

Hi,

what is the use of the option ADDRESSNUMBER ? I ve tried it, but i'm getting no address back in my sapscript ?

I've used the example below :

/: ADDRESS or ADDRESS DELIVERY

/: ADDRESSNUMBER &GX_ADRC-ADDRNUMBER(K)&

/: FROMCOUNTRY 'DE'

/: ENDDADDRESS

Also the option &GX_ADRC-ADDRNUMBER& without the K doesn't work.

The GX_ADRC structure is filled from the ADRC table in the print program.

Anyone ?

regards,

Hans