topic Re: performance tuning in Application Development and Automation Discussions

performance tuning

former_member577909 — Fri, 15 Jun 2007 07:20:34 GMT

Hi Experts,

How to start checking & tuening to the program having Transaction code, using Runtime Analysis and SQL Trace...

Please give me the steps to start and finish .

Thankyou for your valuable time.

Regards,

Bhaskar.

Re: performance tuning

Former Member — Fri, 15 Jun 2007 07:21:28 GMT

1) Dont use nested select statements

2) If possible use for all entries in addition

3) In the where addition make sure you give all the primary key

4) Use Index for the selection criteria.

5) You can also use inner joins

6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.

7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234

ABAP performance depends upon various factors and in devicded in three parts:

1. Database

2. ABAP

3. System

Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.

u can get an interactive grap in SE30 regarding this with a file.

also if u find runtime of parts of codes then use :

Switch on RTA Dynamically within ABAP Code

*To turn runtim analysis on within ABAP code insert the following code

SET RUN TIME ANALYZER ON.

*To turn runtim analysis off within ABAP code insert the following code

SET RUN TIME ANALYZER OFF.

Always check the driver internal tables is not empty, while using FOR ALL ENTRIES

Avoid for all entries in JOINS

Try to avoid joins and use FOR ALL ENTRIES.

Try to restrict the joins to 1 level only ie only for tables

Avoid using Select *.

Avoid having multiple Selects from the same table in the same object.

Try to minimize the number of variables to save memory.

The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)

Avoid creation of index as far as possible

Avoid operators like <>, > , < & like % in where clause conditions

Avoid select/select single statements in loops.

Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.

Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)

Avoid using ORDER BY in selects

Avoid Nested Selects

Avoid Nested Loops of Internal Tables

Try to use FIELD SYMBOLS.

Try to avoid into Corresponding Fields of

Avoid using Select Distinct, Use DELETE ADJACENT

Check the following Links

http://www.sapgenie.com/abap/performance.htm

http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp

check the below link

http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm

See the following link if it's any help:

http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp

Check also http://service.sap.com/performance

and

books like

http://www.sap-press.com/product.cfm?account=&product=H951

http://www.sap-press.com/product.cfm?account=&product=H973

http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm

http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp

Performance tuning for Data Selection Statement

http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm

Debugger

http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm

http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc

http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm

Run Time Analyser

http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm

SQL trace

http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm

CATT - Computer Aided Testing Too

http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm

Test Workbench

http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm

Coverage Analyser

http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm

Runtime Monitor

http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm

Memory Inspector

http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm

ECATT - Extended Computer Aided testing tool.

http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm

Just refer to these links...

You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.

Reward points for useful Answers

Regards

Anji

Re: performance tuning

Former Member — Fri, 15 Jun 2007 07:23:16 GMT

Hi,

here is the Simple Steps

Run time analysis transaction SE30

This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.

SQL Trace transaction ST05

The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.

The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on the SPFLI table in our test program is mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.

The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.

To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.

http://www.erpgenie.com/abap/performance.htm

Regards

Sudheer

Re: performance tuning

former_member198270 — Fri, 15 Jun 2007 07:23:32 GMT

Hi Bhaskar ,

Please check this link .

http://www.sapbrainsonline.com/ARTICLES/TECHNICAL/optimization/optimization.html

Reward points if that link helps you .

Regards,

Amber S

Re: performance tuning

Former Member — Fri, 15 Jun 2007 07:23:53 GMT

tcode : SLIN - this is used to perform extended check of the program

sql trace- ST05. first activate the trace, then execute your program, after execution , deactivate the trace in ST05 again and then display the trace.

SE30 - Run time analysis. This gives a break up of time eaten up by the application server, database server and the program itself.