topic Function modules 'JOB_OPEN' & 'JOB_CLOSE' in Application Development and Automation Discussions

Function modules 'JOB_OPEN' & 'JOB_CLOSE'

Former Member — Fri, 15 Jun 2007 06:54:48 GMT

Hello All,

Could anyone please tell me the functionality of the function modules 'JOB_OPEN', 'JOB_CLOSE'. Any sample code will be of great help.

Regards

Indrajit

Re: Function modules 'JOB_OPEN' & 'JOB_CLOSE'

Former Member — Fri, 15 Jun 2007 06:57:07 GMT

Hi,

report abc.

BREAK-POINT.

DATA : JN(32) TYPE C.

JN = 'JOB001'.

BREAK-POINT.

DATA : J(8) TYPE C.

CALL FUNCTION 'JOB_OPEN'

EXPORTING

DELANFREP = ' '
JOBGROUP = ' '

jobname = JN

SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
JOBCLASS =

IMPORTING

JOBCOUNT = J

CHANGING
RET =
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4

IF sy-subrc <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

DATA : P TYPE PRI_PARAMS.

P-PDEST = 'PRINTER'.

P-PDEST = 'LOCL'.

CALL FUNCTION 'GET_PRINT_PARAMETERS'

EXPORTING NO_DIALOG = 'X'

MODE = 'CURRENT'

NEW_LIST_ID = $PRNEW

IMPORTING OUT_PARAMETERS = P.

CALL FUNCTION 'JOB_SUBMIT'

EXPORTING

ARCPARAMS =

authcknam = 'MAMIT'

COMMANDNAME = ' '
OPERATINGSYSTEM = ' '
EXTPGM_NAME = ' '
EXTPGM_PARAM = ' '
EXTPGM_SET_TRACE_ON = ' '
EXTPGM_STDERR_IN_JOBLOG = 'X'
EXTPGM_STDOUT_IN_JOBLOG = 'X'
EXTPGM_SYSTEM = ' '
EXTPGM_RFCDEST = ' '
EXTPGM_WAIT_FOR_TERMINATION = 'X'

jobcount = J

jobname = JN

LANGUAGE = SY-LANGU

PRIPARAMS = P

REPORT = 'HINCF160'

VARIANT = 'A'

IMPORTING
STEP_NUMBER =

EXCEPTIONS

BAD_PRIPARAMS = 1

BAD_XPGFLAGS = 2
INVALID_JOBDATA = 3
JOBNAME_MISSING = 4
JOB_NOTEX = 5
JOB_SUBMIT_FAILED = 6
LOCK_FAILED = 7
PROGRAM_MISSING = 8
PROG_ABAP_AND_EXTPG_SET = 9

OTHERS = 10

IF sy-subrc <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

CALL FUNCTION 'JOB_CLOSE'

EXPORTING

AT_OPMODE = ' '
AT_OPMODE_PERIODIC = ' '
CALENDAR_ID = ' '
EVENT_ID = ' '
EVENT_PARAM = ' '
EVENT_PERIODIC = ' '

jobcount = J

jobname = JN

LASTSTRTDT = NO_DATE
LASTSTRTTM = NO_TIME
PRDDAYS = 0
PRDHOURS = 0
PRDMINS = 0
PRDMONTHS = 0
PRDWEEKS = 0
PREDJOB_CHECKSTAT = ' '
PRED_JOBCOUNT = ' '
PRED_JOBNAME = ' '
SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
STARTDATE_RESTRICTION = BTC_PROCESS_ALWAYS

STRTIMMED = 'X'

TARGETSYSTEM = ' '
START_ON_WORKDAY_NOT_BEFORE = SY-DATUM
START_ON_WORKDAY_NR = 0
WORKDAY_COUNT_DIRECTION = 0
RECIPIENT_OBJ =
TARGETSERVER = ' '
DONT_RELEASE = ' '
TARGETGROUP = ' '
DIRECT_START =
IMPORTING
JOB_WAS_RELEASED =
CHANGING
RET =
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9

IF sy-subrc <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

BREAK-POINT.

<b>Reward points</b>

Regards

Re: Function modules 'JOB_OPEN' & 'JOB_CLOSE'

Former Member — Fri, 15 Jun 2007 07:01:14 GMT

JOB_OPEN->For opening a job in the background

JOB_SUBMIT->For submitting the job

JOB_CLOSE->For closing the job.

Take a look at the example code for these functions.

http://www.sap-basis-abap.com/sapac018.htm

*Submit report as job(i.e. in background)  
data: jobname like tbtcjob-jobname value
                             ' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
      host like msxxlist-host.
data: begin of starttime.
        include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.

* Job open 
  call function 'JOB_OPEN'
       exporting
            delanfrep        = ' '
            jobgroup         = ' '
            jobname          = jobname
            sdlstrtdt        = sy-datum
            sdlstrttm        = sy-uzeit
       importing
            jobcount         = jobcount
       exceptions
            cant_create_job  = 01
            invalid_job_data = 02
            jobname_missing  = 03.
  if sy-subrc ne 0.
                                       "error processing
  endif.

* Insert process into job
 SUBMIT zreport and return 
                with p_param1 = 'value'
                with p_param2 = 'value'
                user sy-uname
                via job jobname
                number jobcount.
  if sy-subrc > 0.
                                       "error processing
  endif.

* Close job
  starttime-sdlstrtdt = sy-datum + 1.
  starttime-sdlstrttm = '220000'.
  call function 'JOB_CLOSE'
       exporting
            event_id             = starttime-eventid
            event_param          = starttime-eventparm
            event_periodic       = starttime-periodic
            jobcount             = jobcount
            jobname              = jobname
            laststrtdt           = starttime-laststrtdt
            laststrttm           = starttime-laststrttm
            prddays              = 1
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = starttime-sdlstrtdt
            sdlstrttm            = starttime-sdlstrttm
            strtimmed            = starttimeimmediate
            targetsystem         = host
       exceptions
            cant_start_immediate = 01
            invalid_startdate    = 02
            jobname_missing      = 03
            job_close_failed     = 04
            job_nosteps          = 05
            job_notex            = 06
            lock_failed          = 07
            others               = 99.
  if sy-subrc eq 0.
                                       "error processing
  endif.

Regards

Sudheer

Re: Function modules 'JOB_OPEN' & 'JOB_CLOSE'

Former Member — Fri, 15 Jun 2007 07:01:14 GMT

job_open:

Open Job Scheduling Without Dialog (Including COMMIT WORK)

Use JOB_OPEN to create a background job. The function module returns the unique ID number which, together with the job name, is required for identifying the job.

Once you have "opened" a job, you can add job steps to it with JOB_SUBMIT and submit the job for processing with JOB_CLOSE.

job_close:

Close Background Request With COMMIT WORK

Use JOB_CLOSE to pass a background job to the background processing system to be run. Once you have "closed" a job, you can no longer add job steps to it or change job/job step specifications.

The function module returns an indicator as to whether the job was automatically released or not. A job is automatically released to run only if the user who scheduled the job has RELE release authorization for the authorization object Operations on background jobs.

A job step is an independent unit of work in a job, the execution of an ABAP/4 or external program. Each job step can have its own authorizations user and and printer/optical archiving specifications.

Related function modules include:

JOB_OPEN: Create a background job.

JOB_SUBMIT: Add job steps to a job.

Note: if a user does not have the authorization to release a job, then the job is scheduled with the status planned. The job cannot be started until it is released, regardless of any start specifications made for the job.

following is the code using these:

REPORT Z_GENERATE_JOB.

DATA: JOBCOUNT LIKE TBTCO-JOBCOUNT.

PARAMETER: JOBNAME LIKE TBTCO-JOBNAME,

REPORT LIKE SY-REPID,

VARIANT LIKE RALDB-VARIANT,

BTCHUSER LIKE SY-UNAME.

START-OF-SELECTION.

CALL FUNCTION 'JOB_OPEN'

EXPORTING JOBNAME = JOBNAME

IMPORTING JOBCOUNT = JOBCOUNT.

CALL FUNCTION 'JOB_SUBMIT'

EXPORTING AUTHCKNAM = BTCHUSER

JOBCOUNT = JOBCOUNT

JOBNAME = JOBNAME

REPORT = REPORT

VARIANT = VARIANT.

WRITE: / JOBNAME, JOBCOUNT,

REPORT, VARIANT, BTCHUSER.

CALL FUNCTION 'JOB_CLOSE'

EXPORTING JOBCOUNT = JOBCOUNT

JOBNAME = JOBNAME.

regards,

Ruchika

reward if useful.............

Re: Function modules 'JOB_OPEN' & 'JOB_CLOSE'

former_member214288 — Fri, 15 Jun 2007 07:04:17 GMT

Hi,

There can be more than one jobs with the same name and Job count is the unique key to identify a job in a particular system. JOB_OPEN reserve a unique Job count and allows you to submit a Job (using JOB_SUBMIT) with that Job Count and Job name. JOB_CLOSE does a commit work for specific Job Count.

Rewards points if helpful.

Regards,

Ram