topic Re: NEED HELP IN BDC in Application Development and Automation Discussions

NEED HELP IN BDC

Former Member — Fri, 25 May 2007 05:29:16 GMT

Hi,

Iam trying the first BDC program. <b>I need to extract the data from text file which is stored in the local system to the table in sap system</b>.

Could anybody help me out in creating this with examples ASAP.

Thanks,

Shiva shekar k

Re: NEED HELP IN BDC

Former Member — Fri, 25 May 2007 05:46:53 GMT

hi,

check this example. I used BDC-recording - call transaction method.

&----

*& Report ZSR_BDC_CT_ERROR

&----

REPORT ZSR_BDC_CT_ERROR.

DATA: BEGIN OF ITAB OCCURS 0,

LIFNR LIKE RF02K-LIFNR,

KTOKK LIKE RF02K-KTOKK,

NAME1 LIKE LFA1-NAME1,

SORTL LIKE LFA1-SORTL,

LAND1 LIKE LFA1-LAND1,

SPRAS LIKE LFA1-SPRAS,

END OF ITAB.

DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE,

it_error like itab occurs 0 with header line,

BDCMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

START-OF-SELECTION.

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

FILENAME = 'z:ct.txt'

FILETYPE = 'ASC'

HAS_FIELD_SEPARATOR = 'X'

HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =

TABLES

DATA_TAB = ITAB

EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

*perform dynpro using p2.

*perform bdc_field using p3 p4.

LOOP AT ITAB.

REFRESH BDCTAB.

PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'RF02K-KTOKK'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'/00'.

PERFORM BDC_FIELD USING 'RF02K-LIFNR'

ITAB-LIFNR.

PERFORM BDC_FIELD USING 'RF02K-KTOKK'

ITAB-KTOKK.

PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'LFA1-SPRAS'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'/00'.

PERFORM BDC_FIELD USING 'LFA1-NAME1'

ITAB-NAME1.

PERFORM BDC_FIELD USING 'LFA1-SORTL'

ITAB-SORTL.

PERFORM BDC_FIELD USING 'LFA1-LAND1'

ITAB-LAND1.

PERFORM BDC_FIELD USING 'LFA1-SPRAS'

ITAB-SPRAS.

PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'LFA1-KUNNR'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'/00'.

PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'LFBK-BANKS(01)'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'=ENTR'.

PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'=YES'.

CALL TRANSACTION 'XK01' USING BDCTAB MODE 'A' UPDATE 'A' MESSAGES INTO BDCMSG.

*LOOP AT BDCMSG.

if sy-subrc <> 0.

move-corresponding itab to it_error.

endif.

READ TABLE BDCMSG WITH KEY MSGTYP = 'E'.

CALL FUNCTION 'FORMAT_MESSAGE'

EXPORTING

ID = BDCMSG-MSGID

LANG = 'EN'

NO = BDCMSG-MSGNR

V1 = BDCMSG-MSGV1

V2 = BDCMSG-MSGV2

V3 = BDCMSG-MSGV3

V4 = BDCMSG-MSGV4

IMPORTING

MSG = BDCMSG-MSGV1

EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

WRITE 😕 BDCMSG-MSGNR,BDCMSG-MSGV1.

ENDLOOP.

CALL FUNCTION 'GUI_DOWNLOAD'

EXPORTING

BIN_FILESIZE = BIN_FILESIZE

filename = 'z:cerror.txt'

FILETYPE = 'ASC'

APPEND = ' '

WRITE_FIELD_SEPARATOR = 'X'

HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = FILELENGTH

TABLES

data_tab = it_error

FIELDNAMES = FIELDNAMES
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22

IF sy-subrc <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

&----

*& Form dynpro

&----

text

----

-->P_P1 text
-->P_P2 text

----

FORM BDC_DYNPRO USING P_P1

P_P2.

CLEAR BDCTAB.

BDCTAB-PROGRAM = P_P1.

BDCTAB-DYNPRO = P_P2.

BDCTAB-DYNBEGIN = 'X'.

APPEND BDCTAB.

ENDFORM. " dynpro

&----

*& Form bdc_field

&----

text

----

-->P_P3 text
-->P_P4 text

----

FORM BDC_FIELD USING P_P3

P_P4.

CLEAR BDCTAB.

BDCTAB-FNAM = P_P3.

BDCTAB-FVAL = P_P4.

APPEND BDCTAB.

ENDFORM. " bdc_field

flat file:

z795 0001 raey Y in EN

For BDC:

http://myweb.dal.ca/hchinni/sap/bdc_home.htm

https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&;

http://www.sap-img.com/abap/learning-bdc-programming.htm

http://www.sapdevelopment.co.uk/bdc/bdchome.htm

http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm

http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm

http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html

EXample on BDC:

http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm

Check these link:

http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm

http://www.sap-img.com/abap/question-about-bdc-program.htm

http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/

http://www.planetsap.com/bdc_main_page.htm

Re: NEED HELP IN BDC

Former Member — Fri, 25 May 2007 05:57:54 GMT

Hi Shiva,

Check this program...

REPORT Y730_BDC5 .

*HANDLING TABLE CONTROL IN BDC

DATA : BEGIN OF IT_DUMMY OCCURS 0,

DUMMY(100) TYPE C,

END OF IT_DUMMY.

DATA : BEGIN OF IT_XK01 OCCURS 0,

LIFNR(10) TYPE C,

BUKRS(4) TYPE C,

EKORG(4) TYPE C,

KTOKK(4) TYPE C,

NAME1(30) TYPE C,

SORTL(10) TYPE C,

LAND1(3) TYPE C,

SPRAS(2) TYPE C,

AKONT(6) TYPE C,

FDGRV(2) TYPE C,

WAERS(3) TYPE C,

END OF IT_XK01,

BEGIN OF IT_BANK OCCURS 0,

BANKS(3) TYPE C,

BANKL(10) TYPE C,

BANKN(10) TYPE C,

KOINH(30) TYPE C,

LIFNR(10) TYPE C,

END OF IT_BANK.

DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,

IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = 'C:\VENDOR.TXT'

FILETYPE = 'ASC'

TABLES

DATA_TAB = IT_DUMMY.

LOOP AT IT_DUMMY.

IF IT_DUMMY-DUMMY+0(2) = '11'.

IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).

IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).

IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).

IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).

IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).

IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).

IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).

IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).

IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).

IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).

IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).

APPEND IT_XK01.

ELSE.

IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).

IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).

IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).

IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).

IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).

APPEND IT_BANK.

ENDIF.

ENDLOOP.

LOOP AT IT_XK01.

REFRESH IT_BDCDATA.

perform bdc_dynpro using 'SAPMF02K' '0100'.

perform bdc_field using 'BDC_CURSOR'

'RF02K-REF_LIFNR'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'RF02K-LIFNR'

IT_XK01-LIFNR.

perform bdc_field using 'RF02K-BUKRS'

IT_XK01-BUKRS.

perform bdc_field using 'RF02K-EKORG'

IT_XK01-EKORG.

perform bdc_field using 'RF02K-KTOKK'

IT_XK01-KTOKK.

perform bdc_dynpro using 'SAPMF02K' '0110'.

perform bdc_field using 'BDC_CURSOR'

'LFA1-TELX1'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFA1-NAME1'

IT_XK01-NAME1.

perform bdc_field using 'LFA1-SORTL'

IT_XK01-SORTL.

perform bdc_field using 'LFA1-LAND1'

IT_XK01-LAND1.

perform bdc_field using 'LFA1-SPRAS'

IT_XK01-SPRAS.

perform bdc_dynpro using 'SAPMF02K' '0120'.

perform bdc_field using 'BDC_CURSOR'

'LFA1-KUNNR'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0130'.

perform bdc_field using 'BDC_CURSOR'

'LFBK-KOINH(02)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

DATA : FNAM(20) TYPE C,

IDX TYPE C.

MOVE 1 TO IDX.

LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.

CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKS.

CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKL.

CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKN.

CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-KOINH.

IDX = IDX + 1.

ENDLOOP.

perform bdc_dynpro using 'SAPMF02K' '0130'.

perform bdc_field using 'BDC_CURSOR'

'LFBK-BANKS(01)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_dynpro using 'SAPMF02K' '0210'.

perform bdc_field using 'BDC_CURSOR'

'LFB1-FDGRV'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFB1-AKONT'

IT_XK01-AKONT.

perform bdc_field using 'LFB1-FDGRV'

IT_XK01-FDGRV.

perform bdc_dynpro using 'SAPMF02K' '0215'.

perform bdc_field using 'BDC_CURSOR'

'LFB1-ZTERM'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0220'.

perform bdc_field using 'BDC_CURSOR'

'LFB5-MAHNA'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0310'.

perform bdc_field using 'BDC_CURSOR'

'LFM1-WAERS'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFM1-WAERS'

IT_XK01-WAERS.

perform bdc_dynpro using 'SAPMF02K' '0320'.

perform bdc_field using 'BDC_CURSOR'

'WYT3-PARVW(01)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_dynpro using 'SAPLSPO1' '0300'.

perform bdc_field using 'BDC_OKCODE'

'=YES'.

CALL TRANSACTION 'XK01' USING IT_BDCDATA

MODE 'A'

UPDATE 'S'

MESSAGES INTO IT_BDCMSGCOLL.

ENDLOOP.

FORM BDC_DYNPRO USING PROG SCR.

CLEAR IT_BDCDATA.

IT_BDCDATA-PROGRAM = PROG.

IT_BDCDATA-DYNPRO = SCR.

IT_BDCDATA-DYNBEGIN = 'X'.

APPEND IT_BDCDATA.

ENDFORM.

FORM BDC_FIELD USING FNAM FVAL.

CLEAR IT_BDCDATA.

IT_BDCDATA-FNAM = FNAM.

IT_BDCDATA-FVAL = FVAL.

APPEND IT_BDCDATA.

ENDFORM.

Regards,

Younus

<b>Reward Helpful Answers:-)</b>