SAPSCRIPTS - BOX COMMAND.

Former Member — Fri, 25 May 2007 09:49:43 GMT

Hi ,

I hava script in which i am supposed to print an internal table.

now. the script is designed in such a way that on first page the main window starts at line 17 of the page and on second page the main window starts at line no 7.

i ma printing my internal table in the main window. i am ussing box command to get a tabular look n feel . on first page the y pos of the box is set to 18 LN. n its gettin printed properly.

till first 15 records the data gets printed on first page but if the records in the internal table are more than 15 then then the output continues to second screen.

now while setting the ypos how should set the value? how exatly i am supposed to count the value to set for the y pos? when we say BOX ypos 7 LN dose it mean set ypos at line 7 from upword direction? n line of the window or line 7 of the page?

Re: SAPSCRIPTS - BOX COMMAND.

Former Member — Fri, 25 May 2007 09:50:37 GMT

See this and use accordingly

SAPScripts

http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf

http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf

http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf

http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf

http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf

http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm

POSITION WINDOW

SIZE WIDTH '160' MM HEIGHT '140' MM

BOX FRAME 10 TW

BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35

linessssssss

BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW

BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW

BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW

BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW

Boxes, Lines, Shading: BOX, POSITION, SIZE

Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.

The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.

Syntax:

/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]

/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]

/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]

BOX Command

Syntax

/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]

Effect: draws a box of the specified size at the specified position.

Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.

XPOS, YPOS

Upper left corner of the box, relative to the values of the POSITION command.

Default: Values specified in the POSITION command.

The following calculation is performed internally to determine the absolute output position of a box on the page:

X(abs) = XORIGIN + XPOS

Y(abs) = YORIGIN + YPOS

WIDTH

Width of the box. Default: WIDTH value of the SIZE command.

HEIGHT

Height of the box. Default: HEIGHT value of the SIZE command.

FRAME

Thickness of frame.

Default: 0 (no frame).

INTENSITY

Grayscale of box contents as %.

Default: 100 (full black)

Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.

Units of measurement: The following units of measurement may be used:

TW (twip)

PT (point)

IN (inch)

MM (millimeter)

CM (centimeter)

LN (line)

CH (character).

The following conversion factors apply:

1 TW = 1/20 PT

1 PT = 1/72 IN

1 IN = 2.54 CM

1 CM = 10 MM

1 CH = height of a character relative to the CPI specification in the form header

1 LN = height of a line relative to the LPI specification in the form header

/: BOX FRAME 10 TW

Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).

/: BOX INTENSITY 10

Fills the window background with shading having a gray scale of 10 %.

/: BOX HEIGHT 0 TW FRAME 10 TW

Draws a horizontal line across the complete top edge of the window.

/: BOX WIDTH 0 TW FRAME 10 TW

Draws a vertical line along the complete height of the left hand edge of the window.

/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15

/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW

/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW

/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW

Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.

POSITION Command

Syntax

/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]

Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).

Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.

XORIGIN, YORIGIN

Origin of the coordinate system.

WINDOW

Sets the values for the left and upper edges to match those of the current window (default setting).

PAGE

Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).

/: POSITION WINDOW

Sets the origin for the coordinate system to the upper left corner of the window.

/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'

Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.

/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM

Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.

SIZE Command

Syntax

/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]

Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).

Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.

WIDTH, HEIGHT

Dimensions of the rectangle or line.

WINDOW

Sets the values for the width and height to the values of the current window (default setting).

PAGE

Sets the values for the width and height to the values of the current output page.

/: SIZE WINDOW

Sets WIDTH and HEIGHT to the current window dimensions.

/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM

Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.

/: POSITION WINDOW

/: POSITION XORIGIN -20 TW YORIGIN -20 TW

/: SIZE WIDTH +40 TW HEIGHT +40 TW

/: BOX FRAME 10 TW

A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.

<REMOVED BY MODERATOR>

Regards

Anji

Edited by: Alvaro Tejada Galindo on Jul 8, 2008 10:59 AM

Re: SAPSCRIPTS - BOX COMMAND.

sreeramkumar_madisetty — Fri, 25 May 2007 09:50:50 GMT

Use BOX command to create box and write your statement after BOX command.

BOX: These commands are used for drawing boxes and are used only during creating output.

Syntax:

/: BOX [Xpos] [Ypos] [Width] [Height] [Frame] [Intensive]

X & Y – Upper left corner of the box.

Width – Width of the box

Ht – Height of the box

Frame – Thickness of the box (Default is full black)

Units used for Width, Height and Thickness are TW, PT, IN, CM, CH, LN.

/: BOX WIDTH ‘20’ CM HEIGHT 1 IN FRAME 10 TW INTENSIFY 15

/: 'MATERIAL: ' &V_MATNR&

/: 'DESC:' &V_DESC&

See the sample to create a box

change the numbers as per the size

/: POSITION WINDOW

/: POSITION XORIGIN '-0.5' CH YORIGIN '-0.25' LN

/: SIZE WIDTH '+0.4' CH HEIGHT +1 LN

/: BOX FRAME 10 TW

/: BOX HEIGHT '1.7' LN INTENSITY 20

and if u want blank use tab

Regards,

Sree

topic SAPSCRIPTS - BOX COMMAND. in Application Development and Automation Discussions

SAPSCRIPTS - BOX COMMAND.

Re: SAPSCRIPTS - BOX COMMAND.

Re: SAPSCRIPTS - BOX COMMAND.