topic Re: call transaction and session methods in Application Development and Automation Discussions

call transaction and session methods

Former Member — Fri, 25 May 2007 09:15:56 GMT

hi,

can anyone give me standard call transaction program and session method program that are standard but not those that which we write for our purpose to learn in the sense a program which any one could accept as good program.

thanks,

i will surely give ten points to this thread

Re: call transaction and session methods

sreeramkumar_madisetty — Fri, 25 May 2007 09:17:17 GMT

Hi Sara

BDC:

Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.

Features :

BDC is an automatic procedure.

This method is used to transfer large amount of data that is available in electronic medium.

BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).

BDC uses normal transaction codes to transfer data.

Types of BDC :

CLASSICAL BATCH INPUT (Session Method)

CALL TRANSACTION

BATCH INPUT METHOD:

This method is also called as ‘CLASSICAL METHOD’.

Features:

Asynchronous processing.

Synchronous Processing in database update.

Transfer data for more than one transaction.

Batch input processing log will be generated.

During processing, no transaction is started until the previous transaction has been written to the database.

CALL TRANSACTION METHOD :

This is another method to transfer data from the legacy system.

Features:

Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.

Updating the database can be either synchronous or asynchronous. The program specifies the update type.

Transfer data for a single transaction.

Transfers data for a sequence of dialog screens.

No batch input processing log is generated.

For BDC:

http://myweb.dal.ca/hchinni/sap/bdc_home.htm

https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&;

http://www.sap-img.com/abap/learning-bdc-programming.htm

http://www.sapdevelopment.co.uk/bdc/bdchome.htm

http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm

http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm

http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html

Check these link:

http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm

http://www.sap-img.com/abap/question-about-bdc-program.htm

http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/

http://www.planetsap.com/bdc_main_page.htm

Regards,

Sree

Re: call transaction and session methods

Former Member — Fri, 25 May 2007 09:20:22 GMT

Hi Sara,

Check the following links:

http://www.sap-img.com/bdc.htm

See below example code :

Call three FM : BDC_OPEN_GROUP,BDC_INSERT and BDC_CLOSE_GROUP.

Once you execute the program and it creates the session at SM35 Transaction.

************************************************************************

Report : ZMPPC011
Type : Data upload
Author : Chetan Shah
Date : 05/05/2005
Transport : DV3K919557
Transaction: ??
Description: This ABAP/4 Program creates new Production Versions
(C223). It accepts tab-delimited spreadsheet input and
creates BDC sessions.

************************************************************************

Modification Log
Date Programmer Request # Description

************************************************************************

06/10/2005 Chetan Shah DV3K919557 Initial coding

************************************************************************

report zmppc011 no standard page heading line-size 120 line-count 55

message-id zz.

pool of form routines

include zmppn001.

Define BDC Table Structure

data: begin of itab_bdc_tab occurs 0.

include structure bdcdata.

data: end of itab_bdc_tab.

Input record layout of Leagcy File

data: begin of itab_xcel occurs 0,

matnr(18) type c,

werks(4) type c,

alnag(2) type c,

verid(4) type c,

text1(40) type c,

bstmi like mkal-bstmi,

bstma like mkal-bstma,

adatu(10) type c,

bdatu(10) type c,

stlal(2) type c,

stlan(1) type c,

serkz(1) type c,

mdv01(8) type c,

elpro(4) type c,

alort(4) type c,

end of itab_xcel.

data: begin of lt_pp04_cache occurs 0,

matnr like itab_xcel-matnr,

werks like itab_xcel-werks,

alnag like itab_xcel-alnag,

plnnr like mapl-plnnr,

arbpl like crhd-arbpl,

ktext like crtx-ktext,

end of lt_pp04_cache.

data: v_ssnnr(4) type n,

v_lines_in_xcel like sy-tabix,

v_ssnname like apqi-groupid,

v_trans_in_ssn type i,

wa_xcel LIKE itab_xcel,

l_tabix like sy-tabix,

v_matnr like rc27m-matnr,

v_plnnr like mapl-plnnr,

v_plnal like mapl-plnal,

v_tcode like sy-tcode value 'C223',

v_plnty like plas-plnty value 'R',

v_objty like crhd-objty value 'A',

v_plpo_steus like plpo-steus value 'PP04',

v_verwe like crhd-verwe value '0007'.

Parameters

selection-screen: skip 3.

selection-screen: begin of block 1 with frame.

parameters: p_name like rlgrap-filename

default 'C:\My Documents\InputFile.txt'

obligatory,

bdc session name prefix

p_bdcpfx(6) default 'ZPVCRT'

obligatory,

number for transction per BDC session

p_trnssn type i

default 2000 obligatory,

retain the BDC session after successfull execution

p_keep like apqi-qerase

default 'X',

user who will be executing BDC session

p_uname like apqi-userid

default sy-uname

obligatory.

selection-screen: end of block 1.

********************************************************

possible entry list (F4 dropdown) for input file name

at selection-screen on value-request for p_name.

*-SELECT FILE FROM USERS LOCAL PC

call function 'WS_FILENAME_GET'

exporting

DEF_FILENAME = ' '

def_path = 'C:\Temp\'

mask = ',.,..'

mode = 'O'

title = 'Select File '(007)

importing

filename = p_name

RC =

exceptions

inv_winsys = 1

no_batch = 2

selection_cancel = 3

selection_error = 4

others = 5.

if sy-subrc <> 0.

MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

endif.

********************************************************

begin the show

start-of-selection.

read data from input file

perform transfer_xcel_to_itab.

loop at itab_xcel.

hang on to xcel line num

l_tabix = sy-tabix.

each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session

if v_trans_in_ssn is initial.

perform bdc_session_open.

endif.

begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens

perform bdc_build_script.

insert the bdc script as a BDC transaction

perform bdc_submit_transaction.

keep track of how many BDC transactions were inserted in the BDC
session

add 1 to v_trans_in_ssn.

if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session

if v_trans_in_ssn = p_trnssn or

l_tabix = v_lines_in_xcel.

perform bdc_session_close.

clear v_trans_in_ssn.

endif.

endloop.

top-of-page.

call function 'Z_HEADER'

EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =

----

FORM TRANSFER_XCEL_TO_ITAB *

----

Transfer Xcel Spreadsheet to SAP Internal Table *

----

form transfer_xcel_to_itab.

Read the tab-delimited file into itab

call function 'WS_UPLOAD'

exporting

filename = p_name

filetype = 'DAT'

IMPORTING
filelength = flength

tables

data_tab = itab_xcel

exceptions

conversion_error = 1

file_open_error = 2

file_read_error = 3

invalid_table_width = 4

invalid_type = 5

no_batch = 6

unknown_error = 7

others = 8.

if sy-subrc = 0.

sort the data

sort itab_xcel by matnr werks.

clear v_lines_in_xcel.

if no data in the file - error out

describe table itab_xcel lines v_lines_in_xcel.

if v_lines_in_xcel is initial.

write: / 'No data in input file'.

stop.

endif.

else.

if file upload failed - error out

write: / 'Error reading input file'.

stop.

endif.

endform.

----

FORM BDC_SESSION_OPEN *

----

Open BDC Session *

----

form bdc_session_open.

create bdc session name = prefix-from-selectn-screen + nnnn

add 1 to v_ssnnr.

concatenate p_bdcpfx v_ssnnr into v_ssnname.

open new bdc session

call function 'BDC_OPEN_GROUP'

exporting

client = sy-mandt

group = v_ssnname

keep = p_keep

user = p_uname

exceptions

client_invalid = 1

destination_invalid = 2

group_invalid = 3

group_is_locked = 4

holddate_invalid = 5

internal_error = 6

queue_error = 7

running = 8

system_lock_error = 9

user_invalid = 10

others = 11.

endform.

----

FORM BDC_BUILD_SCRIPT *

----

Build BDC *

----

form bdc_build_script.

data: l_arbpl like crhd-arbpl,

l_text1 like mkal-text1,

l_mdv01 like mkal-mdv01,

l_mapl like mapl.

clear bdc-data itab - begin of new bdc transaction

clear itab_bdc_tab.

refresh itab_bdc_tab.

read material cross reference tables to determine sap part#

clear : v_matnr, v_plnnr, v_plnal.

perform read_matnr_cross_ref using itab_xcel-matnr

itab_xcel-werks

changing v_matnr.

determine the version description to use

if itab_xcel-text1 is initial.

l_text1 = itab_xcel-verid.

else.

l_text1 = itab_xcel-text1.

endif.

determine the routing group# and group ctr# to use

perform read_routing .

determine the production line to use

if itab_xcel-mdv01 is initial.

if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above

perform read_wc_on_last_pp04 using v_plnnr v_plnal

changing l_mdv01.

NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)

else.

l_mdv01 = itab_xcel-mdv01.

endif.

build bdc script

perform bdc_build_script_record

fill in initial screen

using: 'X' 'SAPLCMFV' '1000',

' ' 'BDC_OKCODE' '=ENTE',

' ' 'MKAL-WERKS' itab_xcel-werks,

' ' 'MKAL-MATNR' v_matnr,

' ' 'MKAL_ADMIN-DISPO' space,

' ' 'MKAL-PLNNR' space,

' ' 'MKAL_ADMIN-STTAG' space,

' ' 'MKAL-PLNNG' space,

' ' 'MKAL-MDV01' space,

' ' 'MKAL-PLNNM' space,

click create button on initial screen and go to detail screen

'X' 'SAPLCMFV' '1000',

' ' 'BDC_OKCODE' '=CREA',

fill in the detail screen and go back to initial screen

'X' 'SAPLCMFV' '2000',

' ' 'BDC_OKCODE' '=CLOS',

' ' 'MKAL_EXPAND-MATNR' v_matnr,

' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,

' ' 'MKAL_EXPAND-TEXT1' l_text1,

' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,

' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,

' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,

' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,

' ' 'MKAL_EXPAND-PLTYG' v_plnty,

' ' 'MKAL_EXPAND-PLNNG' v_plnnr,

' ' 'MKAL_EXPAND-ALNAG' v_plnal,

' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,

' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,

' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,

' ' 'MKAL_EXPAND-MDV01' l_mdv01,

' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,

' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,

save the production version from initial screen

'X' 'SAPLCMFV' '1000',

' ' 'BDC_OKCODE' '=SAVE'.

endform.

----

FORM BDC_SUBMIT_TRANSACTION *

----

Submit BDC Session *

----

form bdc_submit_transaction.

Load BDC script as a trqansction in BDC session

call function 'BDC_INSERT'

exporting

tcode = v_tcode

tables

dynprotab = itab_bdc_tab

exceptions

internal_error = 01

not_open = 02

queue_error = 03

tcode_invalid = 04.

endform.

----

FORM BDC_BUILD_SCRIPT_RECORD *

----

form bdc_build_script_record using dynbegin name value.

clear itab_bdc_tab.

if dynbegin = 'X'.

move: name to itab_bdc_tab-program,

value to itab_bdc_tab-dynpro,

'X' to itab_bdc_tab-dynbegin.

else.

move: name to itab_bdc_tab-fnam,

value to itab_bdc_tab-fval.

shift itab_bdc_tab-fval left deleting leading space.

endif.

append itab_bdc_tab.

endform.

----

FORM BDC_SESSION_CLOSE *

----

Close BDC Session *

----

form bdc_session_close.

close the session

call function 'BDC_CLOSE_GROUP'

exceptions

not_open = 1

queue_error = 2

others = 3.

skip 2.

if sy-subrc ne 0.

write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.

else.

write : / 'Session created:', v_ssnname,

50 '# of transactions:', v_trans_in_ssn.

endif.

endform.

&----

*& Form read_routing_cache

&----

*FORM read_routing_cache USING pi_matnr

pi_werks
pi_alnag
pi_verid
pi_mdv01.

DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.

determine the routing group#

CLEAR lt_pp04_cache.

chk if its in the cache first, if not then get it from MAPL table
and put it in the cache

READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.

do nothing - lt_pp04_cache header line has rtg#

ELSE.

get the routing group # from MAPL

SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.

put it in the cache internal table

IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.

if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly

IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).

read the last PP04 operation

CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr e_{objty e}objid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON b_{plnty = c}plnty AND
b_{plnnr = c}plnnr AND
b_{zaehl = c}zaehl
INNER JOIN crhd AS e
ON c_{arbid = e}objid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.

IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.

read work center description

SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.

the following read will get the index of the correct record to be
updated in the cache

READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.

*ENDFORM. " read_last_pp04_operation_cache

&----

*& Form read_routing

&----

form read_routing.

data: begin of lt_mapl occurs 0,

plnnr like mapl-plnnr,

plnal like mapl-plnal,

end of lt_mapl,

l_arbpl like crhd-arbpl.

get all the rtg# and grp ctr# from MAPL

select plnnr plnal

into corresponding fields of table lt_mapl

from mapl

where matnr = v_matnr and

werks = itab_xcel-werks and

plnty = v_plnty and "Rate Routing

loekz = space. "with del flag = OFF

sort lt_mapl by plnal.

if not itab_xcel-verid is initial.

if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#

if itab_xcel-verid = '0001'.

read table lt_mapl index 1.

v_plnnr = lt_mapl-plnnr.

v_plnal = lt_mapl-plnal.

else.

if the verid<>0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid

loop at lt_mapl.

clear l_arbpl.

get the work center from the last PP04 operation

perform read_wc_on_last_pp04 using lt_mapl-plnnr

lt_mapl-plnal

changing l_arbpl.

if itab_xcel-verid = l_arbpl.

v_plnnr = lt_mapl-plnnr.

v_plnal = lt_mapl-plnal.

exit.

endif.

endloop.

endif.

else.

do nothing

endif.

For version IDs that are other then '0000' or 'ZWIP' :--

if itab_xcel-verid NE '0000' and

itab_xcel-verid NE 'ZWIP'.

if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.

if v_plnnr is initial or

v_plnal is initial.

itab_xcel-bdatu = '99/99/9999'.

endif.

determine the routing group#

CLEAR lt_pp04_cache.

chk if its in the cache first, if not then get it from MAPL table
and put it in the cache

READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.

do nothing - lt_pp04_cache header line has rtg#

ELSE.

get the routing group # from MAPL
put it in the cache internal table

IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.

if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly

IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).

read the last PP04 operation

CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr e_{objty e}objid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON b_{plnty = c}plnty AND
b_{plnnr = c}plnnr AND
b_{zaehl = c}zaehl
INNER JOIN crhd AS e
ON c_{arbid = e}objid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.

IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.

read work center description

SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.

the following read will get the index of the correct record to be
updated in the cache

READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.

endform. " read_last_pp04_operation_cache

&----

*& Form read_wc_on_last_pp04

&----

form read_wc_on_last_pp04 using pi_plnnr

pi_plnal

changing pe_arbpl.

data: begin of lt_plpo occurs 0,

vornr like plpo-vornr,

objty like crhd-objty,

objid like crhd-objid,

arbpl like crhd-arbpl,

end of lt_plpo.

get all the PP04 operations for the given rtg# & grp-ctr#

select vornr e_{objty e}objid e~arbpl

into corresponding fields of table lt_plpo

from plas as b

inner join plpo as c

on b_{plnty = c}plnty and

b_{plnnr = c}plnnr and

b_{zaehl = c}zaehl

inner join crhd as e

on c_{arbid = e}objid

where b~plnty = v_plnty and "Rate Routing

b~plnnr = pi_plnnr and

b~plnal = pi_plnal and

c~loekz = space and "Oper Del Flag = OFF

c~steus = v_plpo_steus and "PP04

e~objty = v_objty. "WC Obj Type = 'A'

read the last operation

sort lt_plpo by vornr descending.

read table lt_plpo index 1.

pe_arbpl = lt_plpo-arbpl.

endform. " read_wc_on_last_pp04

Regards,

Jayant

Re: call transaction and session methods

Former Member — Fri, 25 May 2007 09:21:08 GMT

Hi Sara,

Check this program,

*.......Structures the SAP flat file does use (SAPstructures)...........

TABLES: BGR00, "Depends on the business object

BMM00, "here for the material master

BMMH1.

*.......Structures the data your provided flat file does use............

DATA: BEGIN OF MY_STRUCTURE OCCURS 1000, "Depends on your legacy data

MATERIAL_NO(10) TYPE C,

DESCRIPTION(20) TYPE C,

ORGANIZATION(10) TYPE C,

MATERIAL_TYPE(5) TYPE C,

MAT_GROUP(5) TYPE C,

WEIGHT(10) TYPE C,

PRICE(10) TYPE C.

DATA: END OF MY_STRUCTURE.

*......Some other data that's needed....................................

DATA: BEGIN OF WORK_AREA OCCURS 1000,

STRING(1500) TYPE C.

DATA: END OF WORK_AREA.

DATA: FLAT_FILE(50) TYPE C VALUE 'C:\matmaster.txt',

FLAT_FILE_SAP(50) TYPE C VALUE 'C:\material.txt',

IDENTIFIER(1) TYPE C. "Identifies different struct.

*......At start-of-selection............................................

START-OF-SELECTION.

PERFORM READ_FLAT_FILE.

PERFORM ANALYZE.

PERFORM CONVERT_AND_WRITE.

*......Read the your flat file and fill internal table my_structure.....

FORM READ_FLAT_FILE.

OPEN DATASET FLAT_FILE FOR INPUT

IN TEXT MODE.

IF SY-SUBRC GT 0.

" Error message has to be issued, because you can't open the file

ENDIF.

DO.

CLEAR WORK_AREA.

READ DATASET FLAT_FILE INTO WORK_AREA.

IF SYST-SUBRC GT 0.

EXIT.

ENDIF.

ENDDO.

CLOSE DATASET FLAT_FILE.

ENDFORM.

*.....Analyze work_area and move fields into my_structure...............

FORM ANALYZE.

LOOP AT WORK_AREA.

"loop at all fields in the record

"get field and move it in the corresponding field in my_structure

"endloop

ENDLOOP.

ENDFORM.

*.......Convert and write the SAP flat file.............................

FORM CONVERT_AND_WRITE.

OPEN DATASET FLAT_FILE_SAP FOR OUTPUT IN TEXT MODE.

IF SY-SUBRC GT 0.

"Open has failed, so issue an error message

ENDIF.

LOOP AT MY_STRUCTURE.

"determine the target-structure and set identifier.

CASE IDENTIFIER.

"when structure1

"fill fields of structure1.

"transfer the needed SAPstructure(s) to flat_file_sap.

"when structure2.

"...

"when others.

"that should probably provoke an error!

ENDCASE.

ENDLOOP.

CLOSE DATASET FLAT_FILE_SAP.

ENDFORM.

Thanks.

Re: call transaction and session methods

Former Member — Fri, 25 May 2007 09:22:32 GMT

What is your exact requirme..

See a program which handles Call Transaction and Session In One Program......

Take a look at the following code :

CALL TRANSACTION 'V-03' USING W_BDCDATA MODE 'N' UPDATE 'S'

MESSAGES INTO W_MESSTAB.

Si subrc <> 0 : Batch input

IF SY-SUBRC <> 0.

W_COMPT_ERR = W_COMPT_ERR + 1.

IF W_COMPT_ERR EQ 1.

Open BI

PERFORM TREAT_BDC TABLES WE_BDCDATA

USING P_BATCH ' ' 'O'.

ENDIF.

Insert BI

PERFORM TREAT_BDC TABLES WE_BDCDATA

USING ' ' 'V-03' 'I'.

ELSE.

REFRESH W_BDCDATA.

ENDIF.

...

closing of bi session if created

IF W_COMPT_ERR > '0'.

PERFORM TREAT_BDC TABLES WE_BDCDATA

USING ' ' 'V-03' 'C'.

ENDIF.

----

FORM TREAT_BDC

**----

Error treatment creating a Bacth Input session

*----

*- wf_bdcdata: internal table type BDCDATA,

*- wf_dossier: Batch Input session name wf_trans:

transaction code
- wf_mode: O, I, OR C.

----

FORM TREAT_BDC TABLES WF_BDCDATA

USING WF_DOSSIER WF_TRANS WF_MODE.

Open Batch Input

IF WF_MODE = 'O'.

CALL FUNCTION 'BDC_OPEN_GROUP'

EXPORTING

CLIENT = SY-MANDT

DEST = FILLER8

GROUP = WF_DOSSIER

HOLDDATE = FILLER8
KEEP = FILLER1

USER = SY-UNAME

RECORD = FILLER1
IMPORTING
QID =

EXCEPTIONS

CLIENT_INVALID = 1

DESTINATION_INVALID = 2

GROUP_INVALID = 3

GROUP_IS_LOCKED = 4

HOLDDATE_INVALID = 5

INTERNAL_ERROR = 6

QUEUE_ERROR = 7

RUNNING = 8

SYSTEM_LOCK_ERROR = 9

USER_INVALID = 10

OTHERS = 11.

IF SY-SUBRC <> 0.

MESSAGE E016 WITH WF_DOSSIER.

ENDIF.

Call BDC_INSERT

IF WF_MODE = 'I'.

CALL FUNCTION 'BDC_INSERT'

EXPORTING

TCODE = 'V-03'

POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT

TABLES

DYNPROTAB = W_BDCDATA

EXCEPTIONS

INTERNAL_ERROR = 1

NOT_OPEN = 2

QUEUE_ERROR = 3

TCODE_INVALID = 4

PRINTING_INVALID = 5

POSTING_INVALID = 6

OTHERS = 7.

IF SY-SUBRC <> 0.

MESSAGE E017 WITH WF_TRANS.

ENDIF.

REFRESH W_BDCDATA.

ENDIF.

Closing Batch Input

IF WF_MODE = 'C'.

CALL FUNCTION 'BDC_CLOSE_GROUP'

EXCEPTIONS

NOT_OPEN = 1

QUEUE_ERROR = 2

OTHERS = 3.

IF SY-SUBRC <> 0.

MESSAGE E018.

ENDIF.

ENDFORM.

Reward All Helpfull Answers............

Re: call transaction and session methods

Former Member — Fri, 25 May 2007 09:26:14 GMT

Hi Sara,

Goto LSMW-> Select Direct Input method in 1st step. These are the standard programs for data transfer.

Otherwise goto SPRO->SAP Reference IMG-> Under this you'll find standard data transfer programs module wise.

Regards,

Younus

<b>Reward Helpful Answers:-)</b>