topic Re: Error while uploading text file.... in Application Development and Automation Discussions

Error while uploading text file....

Former Member — Mon, 02 Apr 2007 16:27:22 GMT

Halo Friends,

I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.

Please solve this problem as soon as possible.

Thanks in Advance,

rama

Re: Error while uploading text file....

Former Member — Mon, 02 Apr 2007 16:30:19 GMT

sorry wrong post

~~Guduri

Re: Error while uploading text file....

RichHeilman — Mon, 02 Apr 2007 16:37:20 GMT

Lets see your coding.... and the declaration of the internal tables. Also, you may want to use GUI_UPLOAD instead as it is unicode compliant.

Regards,

RIch Heilman

Re: Error while uploading text file....

Former Member — Mon, 02 Apr 2007 16:46:01 GMT

Hi,

i have a small correction

My error says 'error when opening the downloaded file' but not 'error when uploading/downloading the file'

i am pasting my code here:

REPORT Y_NEW_UPDATE .

Tables: qmfe.

data: begin of gt1_qmfe occurs 0,

qmnum type qmfe-qmnum,

fenum type qmfe-fenum,

/itml/usr20 type qmfe-/itml/usr20,

end of gt1_qmfe.

data: begin of gt2_qmfe occurs 0,

qmnum type qmfe-qmnum,

fenum type qmfe-fenum,

/itml/usr21 type qmfe-/itml/usr21,

end of gt2_qmfe.

data: begin of gt3_qmfe occurs 0,

qmnum type qmfe-qmnum,

fenum type qmfe-fenum,

/itml/usr19 type qmfe-/itml/usr19,

end of gt3_qmfe.

data: begin of gt4_qmfe occurs 0,

qmnum type qmfe-qmnum,

fenum type qmfe-fenum,

/itml/usr07 type qmfe-/itml/usr07,

end of gt4_qmfe.

data: gs1_qmfe like line of gt1_qmfe,

gs2_qmfe like line of gt2_qmfe,

gs3_qmfe like line of gt3_qmfe,

gs4_qmfe like line of gt4_qmfe.

data: ls_lines1 type i,

ls_lines2 type i,

ls_lines3 type i,

ls_lines4 type i.

parameters: ip_file1 default 'C:\Urgent\TextFiles\StoDt.txt' obligatory,

ip_file2 default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,

ip_file3 default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,

ip_file4 default 'C:\Urgent\TextFiles\AWB.txt' obligatory.

field-symbols: <fs1> like gs1_qmfe,

<fs2> like gs2_qmfe,

<fs3> like gs3_qmfe,

<fs4> like gs4_qmfe.

perform upload_gt1_qmfe.

perform upload_gt2_qmfe.

perform upload_gt3_qmfe.

perform upload_gt4_qmfe.

perform update_qmfe.

&----

*& Form upload_gt1_qmfe

&----

text

----

--> p1 text
<-- p2 text

----

FORM upload_gt1_qmfe .

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = 'ip_file1'

FILETYPE = 'DAT'

TABLES

DATA_TAB = gt1_qmfe.

describe table gt1_qmfe lines ls_lines1.

write: / ls_lines1.

ENDFORM. " upload_gt1_qmfe

&----

*& Form upload_gt2_qmfe

&----

text

----

--> p1 text
<-- p2 text

----

FORM upload_gt2_qmfe .

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = 'ip_file2'

FILETYPE = 'DAT'

TABLES

DATA_TAB = gt2_qmfe.

describe table gt2_qmfe lines ls_lines2.

write: / ls_lines2.

ENDFORM. " upload_gt2_qmfe

&----

*& Form upload_gt3_qmfe

&----

text

----

--> p1 text
<-- p2 text

----

FORM upload_gt3_qmfe .

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = 'ip_file3'

FILETYPE = 'DAT'

TABLES

DATA_TAB = gt3_qmfe.

describe table gt3_qmfe lines ls_lines3.

write: / ls_lines3.

ENDFORM. " upload_gt3_qmfe

&----

*& Form upload_gt4_qmfe

&----

text

----

--> p1 text
<-- p2 text

----

FORM upload_gt4_qmfe .

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = 'ip_file4'

FILETYPE = 'DAT'

TABLES

DATA_TAB = gt4_qmfe.

describe table gt4_qmfe lines ls_lines4.

write: / ls_lines4.

ENDFORM. " upload_gt4_qmfe

Please go through this

Re: Error while uploading text file....

RichHeilman — Mon, 02 Apr 2007 16:56:10 GMT

Do not use literals when passing values to the function call.

Here you have....


CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'ip_file1'     "<--  HERE
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt1_qmfe.

It should be....

CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file1     "<-  HERE
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt1_qmfe.

Do this for all your calls to WS_UPLOAD. IT should fix the problem.

Regards,

Rich Heilman

Re: Error while uploading text file....

Former Member — Mon, 02 Apr 2007 17:44:12 GMT

DATA:

BEGIN OF FS_SPFLI,

CARRID TYPE SPFLI-CARRID,

CONNID TYPE SPFLI-CONNID,

COUNTRYFR TYPE SPFLI-COUNTRYFR,

CITYFROM TYPE SPFLI-CITYFROM,

AIRPFROM TYPE SPFLI-AIRPFROM,

COUNTRYTO TYPE SPFLI-COUNTRYTO,

CITYTO TYPE SPFLI-CITYTO,

AIRPTO TYPE SPFLI-AIRPTO,

FLTIME TYPE SPFLI-FLTIME,

DEPTIME TYPE SPFLI-DEPTIME,

ARRTIME TYPE SPFLI-ARRTIME,

DISTANCE TYPE SPFLI-DISTANCE,

DISTID TYPE SPFLI-DISTID,

FLTYPE TYPE SPFLI-FLTYPE,

PERIOD TYPE SPFLI-PERIOD,

END OF FS_SPFLI.

DATA:

T_SPFLI LIKE

STANDARD TABLE

OF FS_SPFLI.

DATA:

BEGIN OF FS_TABLE,

CHAR(100) TYPE C,

END OF FS_TABLE.

DATA:

T_TABLE LIKE

STANDARD TABLE

OF FS_TABLE.

DATA:

BEGIN OF FS_TABLE1,

CHAR(100) TYPE C,

END OF FS_TABLE1.

DATA:

T_TABLE1 LIKE

STANDARD TABLE

OF FS_TABLE1.

SELECT CARRID

CONNID

COUNTRYFR

CITYFROM

AIRPFROM

COUNTRYTO

CITYTO

AIRPTO

FLTIME

DEPTIME

ARRTIME

DISTANCE

DISTID

FLTYPE

PERIOD

FROM SPFLI

INTO TABLE T_SPFLI.

CALL FUNCTION 'GUI_DOWNLOAD'

EXPORTING

BIN_FILESIZE =

FILENAME = 'd:\files\yh627_spfli04'

FILETYPE = 'ASC'

APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =

TABLES

DATA_TAB = T_SPFLI

FIELDNAMES =

EXCEPTIONS

FILE_WRITE_ERROR = 1

NO_BATCH = 2

GUI_REFUSE_FILETRANSFER = 3

INVALID_TYPE = 4

NO_AUTHORITY = 5

UNKNOWN_ERROR = 6

HEADER_NOT_ALLOWED = 7

SEPARATOR_NOT_ALLOWED = 8

FILESIZE_NOT_ALLOWED = 9

HEADER_TOO_LONG = 10

DP_ERROR_CREATE = 11

DP_ERROR_SEND = 12

DP_ERROR_WRITE = 13

UNKNOWN_DP_ERROR = 14

ACCESS_DENIED = 15

DP_OUT_OF_MEMORY = 16

DISK_FULL = 17

DP_TIMEOUT = 18

FILE_NOT_FOUND = 19

DATAPROVIDER_EXCEPTION = 20

CONTROL_FLUSH_ERROR = 21

OTHERS = 22

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

FILENAME = 'd:\files\yh627_spfli04'

FILETYPE = 'ASC'

HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
IMPORTING
FILELENGTH =
HEADER =

TABLES

DATA_TAB = T_TABLE

EXCEPTIONS

FILE_OPEN_ERROR = 1

FILE_READ_ERROR = 2

NO_BATCH = 3

GUI_REFUSE_FILETRANSFER = 4

INVALID_TYPE = 5

NO_AUTHORITY = 6

UNKNOWN_ERROR = 7

BAD_DATA_FORMAT = 8

HEADER_NOT_ALLOWED = 9

SEPARATOR_NOT_ALLOWED = 10

HEADER_TOO_LONG = 11

UNKNOWN_DP_ERROR = 12

ACCESS_DENIED = 13

DP_OUT_OF_MEMORY = 14

DISK_FULL = 15

DP_TIMEOUT = 16

OTHERS = 17

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

*LOOP AT T_TABLE INTO FS_TABLE.

WRITE:
/ FS_TABLE-CHAR.

*ENDLOOP.

OPEN DATASET 'yh627_spfli04' FOR INPUT IN TEXT MODE ENCODING DEFAULT.

IF SY-SUBRC EQ 0.

MESSAGE 'File Already Exists' TYPE 'I'.

EXIT.

ELSE.

CLOSE DATASET 'yh627_spfli04'.

OPEN DATASET 'yh627_spfli04' FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.

LOOP AT T_TABLE INTO FS_TABLE.

TRANSFER FS_TABLE TO 'yh627_spfli04'.

ENDLOOP.

CLOSE DATASET 'yh627_spfli04'.

ENDIF.

Re: Error while uploading text file....

Former Member — Mon, 02 Apr 2007 20:24:57 GMT

Halo sir,

I have done as said by you and removed the quotes for the filename but now am getting a short dump and the analysis says something like this:

"The reason for the exception is:

The call to the function module "WS_UPLOAD" is incorrect.

The function module interface allows you to specify only fields of a particular type under "FILENAME". The field "IP_FILE1" specified here has a different field type."

Hope this is clear for you.

regards,

rama

Re: Error while uploading text file....

RichHeilman — Mon, 02 Apr 2007 20:52:11 GMT

Please declare your parameters like this.

parameters: ip_file1 type RLGRAP-FILENAME  default 'C:UrgentTextFilesStoDt.txt' obligatory,
ip_file2 type RLGRAP-FILENAME default 'C:UrgentTextFilesRcDtCust.txt' obligatory,
ip_file3 type RLGRAP-FILENAME default 'C:UrgentTextFilesDockDate.txt' obligatory,
ip_file4 type RLGRAP-FILENAME default 'C:UrgentTextFilesAWB.txt' obligatory.

Regards,

Rich Heilman

Re: Error while uploading text file....

Former Member — Mon, 02 Apr 2007 20:55:43 GMT

Hi Rama,

Parameters need to be declared like this.

parameters:

ip_file1 like rlgrap-filename default 'C:\Urgent\TextFiles\StoDt.txt' obligatory,

ip_file2 like rlgrap-filename default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,

ip_file3 like rlgrap-filename default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,

ip_file4 like rlgrap-filename default 'C:\Urgent\TextFiles\AWB.txt' obligatory.

Thanks,

Srinivas

Re: Error while uploading text file....

Former Member — Tue, 03 Apr 2007 06:34:41 GMT

Halo Mr. Heilman n Srinivas,

Thanks a lot for that. Now i have got it.

Now i can proceed with my program further, if i get any doubts i would be here again.

bbbbye

Thanks again for both of you.

Cheers,

rama

Re: Error while uploading text file....

Former Member — Tue, 03 Apr 2007 07:01:40 GMT

Halo again,

Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.

and hence the it is not committed.

Any suggestions. i am pasting my code here for your reference:

Tables: qmfe.

data: begin of gt1_qmfe occurs 0,

qmnum like qmfe-qmnum,

fenum like qmfe-fenum,

/itml/usr20 like qmfe-/itml/usr20,

end of gt1_qmfe.

data: begin of gt2_qmfe occurs 0,

qmnum like qmfe-qmnum,

fenum like qmfe-fenum,

/itml/usr21 like qmfe-/itml/usr21,

end of gt2_qmfe.

data: begin of gt3_qmfe occurs 0,

qmnum like qmfe-qmnum,

fenum like qmfe-fenum,

/itml/usr19 like qmfe-/itml/usr19,

end of gt3_qmfe.

data: begin of gt4_qmfe occurs 0,

qmnum like qmfe-qmnum,

fenum like qmfe-fenum,

/itml/usr07 like qmfe-/itml/usr07,

end of gt4_qmfe.

data: gs1_qmfe like line of gt1_qmfe,

gs2_qmfe like line of gt2_qmfe,

gs3_qmfe like line of gt3_qmfe,

gs4_qmfe like line of gt4_qmfe.

data: ls_lines1 type i,

ls_lines2 type i,

ls_lines3 type i,

ls_lines4 type i.

parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt' obligatory,

ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,

ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,

ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt' obligatory.

field-symbols: <fs1> like gs1_qmfe,

<fs2> like gs2_qmfe,

<fs3> like gs3_qmfe,

<fs4> like gs4_qmfe.

perform upload_gt1_qmfe.

perform upload_gt2_qmfe.

perform upload_gt3_qmfe.

perform upload_gt4_qmfe.

perform update_qmfe.

&----

*& Form upload_gt1_qmfe

&----

text

----

--> p1 text
<-- p2 text

----

FORM upload_gt1_qmfe .

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = ip_file1

FILETYPE = 'DAT'

TABLES

DATA_TAB = gt1_qmfe.

describe table gt1_qmfe lines ls_lines1.

write: / ls_lines1.

ENDFORM. " upload_gt1_qmfe

&----

*& Form upload_gt2_qmfe

&----

text

----

--> p1 text
<-- p2 text

----

FORM upload_gt2_qmfe .

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = ip_file2

FILETYPE = 'DAT'

TABLES

DATA_TAB = gt2_qmfe.

describe table gt2_qmfe lines ls_lines2.

write: / ls_lines2.

ENDFORM. " upload_gt2_qmfe

&----

*& Form upload_gt3_qmfe

&----

text

----

--> p1 text
<-- p2 text

----

FORM upload_gt3_qmfe .

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = ip_file3

FILETYPE = 'DAT'

TABLES

DATA_TAB = gt3_qmfe.

describe table gt3_qmfe lines ls_lines3.

write: / ls_lines3.

ENDFORM. " upload_gt3_qmfe

&----

*& Form upload_gt4_qmfe

&----

text

----

--> p1 text
<-- p2 text

----

FORM upload_gt4_qmfe .

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = ip_file4

FILETYPE = 'DAT'

TABLES

DATA_TAB = gt4_qmfe.

describe table gt4_qmfe lines ls_lines4.

write: / ls_lines4.

ENDFORM. " upload_gt4_qmfe

&----

*& Form update_qmfe

&----

text

----

--> p1 text
<-- p2 text

----

FORM update_qmfe .

data ls_cnt type i.

loop at gt1_qmfe assigning <fs1>.

update qmfe set /itml/usr20 = <fs1>-/itml/usr20

where qmnum = <fs1>-qmnum

and fenum = <fs1>-fenum.

if sy-subrc = 0.

commit work.

add 1 to ls_cnt.

endif.

endloop.

write: / ls_cnt.

ENDFORM. " update_qmfe

Re: Error while uploading text file....

Former Member — Wed, 04 Apr 2007 11:03:39 GMT

Halo Mr. Heilman,

Can you please explain me the exact meaning of this keyword that you have suggested me to use.

RLGRAP-FILENAME

It worked fine for my program, but can u explain me it in detail

Best Regards,

rama

Re: Error while uploading text file....

erp_superman — Thu, 28 Jul 2022 17:16:26 GMT

The reason I am replying to your question is that I was wondering this myself. Why did the programmer who created this structure name it RLGRAP? I was expecting kind of German abbreviation,

The program SAPLGRAP uses the structure and my version of this program regenerated by GRAPH.

It defines: DATA: GLOBAL_DOWNLOAD_PATH LIKE RLGRAP-FILENAME. Which notably is in English.

So GRAP -> Graph

My best guess is ReLationship GRAPh-Filename.