topic problem in b d c in Application Development and Automation Discussions

problem in b d c

Former Member — Thu, 12 Apr 2007 05:35:11 GMT

hi friends, i am developing a BDC for account master using table SKA1 with field XBILK and transaction codes fs00 and fb01. in program i am not supposed to get any pop up screen when XBILK is 'X.' for cost center data entry i.e when XBILK is X no cost center will be there, but i am getting pop up screen asking me to enter costcentre even it is X . please suggest me in this regard. it s urgent. due to some reasons i can't sending the code.

kumar.

Re: problem in b d c

Former Member — Thu, 12 Apr 2007 05:40:55 GMT

Hi Kumar,

REPORT zra_gl_cr NO STANDARD PAGE HEADING LINE-SIZE 255.

************************************************************************

Include Declarations *****

************************************************************************

TYPE-POOLS: truxs.

*INCLUDE bdcrecx1.

************************************************************************

Database Table Declarations *****

************************************************************************

Data Definitions , Internal Tables and Variables *****

************************************************************************

DATA: it_raw TYPE truxs_t_text_data.

DATA:messtab1 LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.

DATA:messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.

DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.

DATA: BEGIN OF i_mess OCCURS 0,

l_mstring(480),

msgnr(5),

msgv1(15),

END OF i_mess.

DATA:i_mess1 LIKE i_mess OCCURS 0 WITH HEADER LINE.

DATA: l_mstring(480),l_mstring1(480).

DATA: BEGIN OF it_itab OCCURS 0,

saknr(10), "G/L a/c number.

bukrs(4), "Company Code.

ktoks(4), "G/L a/c group.

xplacct(1), "P&L statement account.

xbilk(1), "Balance sheet account.

txt20_ml(20), "G/L a/c short text.

txt50_ml(50), "G/L a/c long text.

waers(5), "Account currency.

MWSKZ(2),

mitkz(1), "Reconciliation a/c for a/c type.

xopvw(1), "Open item management

xkres(1), "Line item display.

zuawa(3), "Sort Key.

fstag(4), "Field status group.

xintb(1), "Post automatically only.

hbkid(5), "House bank.

hktid(5), "Account id.

vzskz(2), "Interest indicator

END OF it_itab.

DATA: hdate LIKE sy-datum.

************************************************************************

Selection Screen *****

************************************************************************

SELECTION-SCREEN BEGIN OF LINE.

SELECTION-SCREEN COMMENT 5(15) text-103. " FOR FIELD P_FILE1.

SELECTION-SCREEN POSITION 25.

PARAMETERS : p_file1 LIKE rlgrap-filename.

SELECTION-SCREEN END OF LINE.

************************************************************************

Initialization *****

************************************************************************

INITIALIZATION.

************************************************************************

At Selection Screen *****

************************************************************************

AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.

Perform file_selection will help to select the location of the file

PERFORM file_selection.

************************************************************************

Start-Of-Selection *****

************************************************************************

START-OF-SELECTION.

Perform data_upload will help to upload the data from the flat file
to the internal table.

PERFORM data_upload.

PERFORM open_group.

Peform bdc_upload will help to upload the data from the internal
table into its respective fields.
PERFORM bdc_fspo.

PERFORM bdc_upload.

PERFORM exp_log.

PERFORM close_group.

Perform display_log will prepare a log for the data that has been
uploaded

PERFORM display_log.

************************************************************************

End-Of-Selection ****

************************************************************************

END-OF-SELECTION.

&----

*& Form file_selection

&----

To select the location of the file

----

FORM file_selection .

CALL FUNCTION 'WS_FILENAME_GET'

EXPORTING

def_filename = ' '

def_path = 'C:\'

mask = ',.txt,.xls.'

mode = 'O'

title = 'Open a excel file'

IMPORTING

filename = p_file1

EXCEPTIONS

inv_winsys = 1

no_batch = 2

selection_cancel = 3

selection_error = 4

OTHERS = 5.

ENDFORM. " file_selection

&----

*& Form data_upload

&----

To upload the data from the file location to the internal table.

----

FORM data_upload .

CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'

EXPORTING

I_FIELD_SEPERATOR =

i_line_header = 'X'

i_tab_raw_data = it_raw

i_filename = p_file1

TABLES

i_tab_converted_data = it_itab

EXCEPTIONS

conversion_failed = 1

OTHERS = 2.

IF sy-subrc <> 0.

MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno

WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

ENDIF.

ENDFORM. " data_upload

&----

*& Form bdc_upload

&----

To upload the data from the internal table into its respective fields.

----

FORM bdc_upload .

LOOP AT it_itab.

perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=ACC_CRE'.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_KEY-SAKNR'.

perform bdc_field using 'GLACCOUNT_SCREEN_KEY-SAKNR'

it_itab-SAKNR.

perform bdc_field using 'GLACCOUNT_SCREEN_KEY-BUKRS'

it_itab-BUKRS.

perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=2102_GROUP'.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_COA-KTOKS'.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'

it_itab-KTOKS.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-XPLACCT'

it_itab-XPLACCT.

perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=2102_BS_PL'.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_COA-XBILK'.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'

it_itab-KTOKS.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-XPLACCT'

it_itab-XPLACCT.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'

it_itab-XBILK.

perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=ENTER'.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'

it_itab-KTOKS.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'

it_itab-XBILK.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT20_ML'

it_itab-TXT20_ML.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT50_ML'

it_itab-TXT50_ML.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_COA-BILKT'.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-BILKT'

it_itab-saknr.

PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=TAB02'.

PERFORM bdc_field USING 'BDC_CURSOR'

'GLACCOUNT_SCREEN_COA-KTOKS'.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-KTOKS'

it_itab-ktoks.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT20_ML'

it_itab-txt20_ml.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT50_ML'

it_itab-txt50_ml.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_COA-BILKT'.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-BILKT'

it_itab-saknr.

****

perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=TAB02'.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_COA-KTOKS'.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'

it_itab-KTOKS.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_COA-KTOKS'.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'

it_itab-KTOKS.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'

it_itab-XBILK.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT20_ML'

it_itab-TXT20_ML.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT50_ML'

it_itab-TXT50_ML.

perform bdc_field using 'GLACCOUNT_SCREEN_COA-BILKT'

it_itab-saknr.

perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=ENTER'.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-WAERS'

it_itab-waers.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MWSKZ'

it_itab-MWSKZ.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MITKZ'

it_itab-mitkz.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_CCODE-XOPVW'.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XOPVW'

it_itab-XOPVW.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XKRES'

it_itab-XKRES.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-ZUAWA'

it_itab-ZUAWA.

*******************

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XPLACCT'

it_itab-xplacct.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XBILK'

it_itab-xbilk.

IF it_itab-xbilk = 'X'.

PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=TAB03'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-WAERS'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-WAERS'
it_itab-waers.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-XOPVW'
it_itab-xopvw.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-MITKZ'
it_itab-mitkz.
ENDIF.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-XKRES'
it_itab-xkres.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
it_itab-zuawa.

PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-FSTAG'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-FSTAG'
it_itab-fstag.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-XINTB'
it_itab-xintb.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-HBKID'
it_itab-hbkid.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-HKTID'
it_itab-hktid.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-VZSKZ'
it_itab-vzskz.

perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=TAB03'.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_CCODE-WAERS'.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-WAERS'

it_itab-WAERS.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MWSKZ'

it_itab-MWSKZ.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MITKZ'

it_itab-MITKZ.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-ZUAWA'

it_itab-ZUAWA.

perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=ENTER'.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_CCODE-FSTAG'.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-FSTAG'

it_itab-FSTAG.

perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=SAVE'.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_CCODE-FSTAG'.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-FSTAG'

it_itab-FSTAG.

PERFORM bdc_transaction USING 'FS00'.

CALL TRANSACTION 'FS00' USING bdcdata MODE 'A'

UPDATE 'S'

MESSAGES INTO messtab1.

PERFORM mess1.

REFRESH bdcdata[].

ENDLOOP.

ENDFORM. " bdc_upload

&----

*& Form bdc_fspo

&----

text

----

FORM bdc_fspo .

LOOP AT it_itab.

PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ACC_CRE'.

PERFORM bdc_field USING 'BDC_CURSOR'

'GLACCOUNT_SCREEN_KEY-SAKNR'.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_KEY-SAKNR'

it_itab-saknr.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_KEY-KTOPL'

'1000'.

PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=2102_GROUP'.

PERFORM bdc_field USING 'BDC_CURSOR'

'GLACCOUNT_SCREEN_COA-KTOKS'.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-KTOKS'

it_itab-ktoks.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XPLACCT'

it_itab-xplacct.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XBILK'

it_itab-xbilk.

PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=SAVE'.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-KTOKS'

it_itab-ktoks.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XPLACCT'

it_itab-xplacct.

PERFORM bdc_field USING 'BDC_CURSOR'

'GLACCOUNT_SCREEN_COA-TXT50_ML'.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT20_ML'

it_itab-txt20_ml.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT50_ML'

it_itab-txt50_ml.

*perform bdc_transaction using 'FSP0'.

CALL TRANSACTION 'FSP0' USING bdcdata MODE 'A'

UPDATE 'S'

MESSAGES INTO messtab.

PERFORM mess.

REFRESH bdcdata[].

ENDLOOP.

ENDFORM. " bdc_fspo

&----

*& Form mess

&----

text

----

--> p1 text
<-- p2 text

----

FORM mess . "fsp0

LOOP AT messtab.

CALL FUNCTION 'FORMAT_MESSAGE'

EXPORTING

id = messtab-msgid

lang = messtab-msgspra

no = messtab-msgnr

v1 = messtab-msgv1

v2 = messtab-msgv2

v3 = messtab-msgv3

v4 = messtab-msgv4

IMPORTING

msg = l_mstring

EXCEPTIONS

not_found = 1

OTHERS = 2.

CONDENSE l_mstring.

i_mess1-l_mstring = l_mstring(250).

i_mess1-msgnr = messtab1-msgnr.

i_mess1-msgv1 = messtab1-msgv1.

APPEND i_mess1.

ENDLOOP.

ENDFORM. " mess

&----

*& Form mess1

&----

text

----

--> p1 text
<-- p2 text

----

FORM mess1 . "fs00

LOOP AT messtab1.

CALL FUNCTION 'FORMAT_MESSAGE'

EXPORTING

id = messtab1-msgid

lang = messtab1-msgspra

no = messtab1-msgnr

v1 = messtab1-msgv1

v2 = messtab1-msgv2

v3 = messtab1-msgv3

v4 = messtab1-msgv4

IMPORTING

msg = l_mstring1

EXCEPTIONS

not_found = 1

OTHERS = 2.

CONDENSE l_mstring1.

i_mess-l_mstring = l_mstring1(250).

i_mess-msgnr = messtab1-msgnr.

i_mess-msgv1 = messtab1-msgv1.

APPEND i_mess.

ENDLOOP.

ENDFORM. " mess1

&----

*& Form exp_log

&----

text

----

--> p1 text
<-- p2 text

----

FORM exp_log .

CALL FUNCTION 'GUI_DOWNLOAD'

EXPORTING

filename = 'c:\temp\error_fsp0.txt'

filetype = 'DAT'

TABLES

data_tab = i_mess1.

CALL FUNCTION 'GUI_DOWNLOAD'

EXPORTING

filename = 'c:\temp\error_fs00.txt'

filetype = 'DAT'

TABLES

data_tab = i_mess.

ENDFORM. " exp_log

&----

*& Form bdc_dynpro

&----

text

----

-->PROGRAM text
-->DYNPRO text

----

FORM bdc_dynpro USING program dynpro.

CLEAR bdcdata.

bdcdata-program = program.

bdcdata-dynpro = dynpro.

bdcdata-dynbegin = 'X'.

APPEND bdcdata.

ENDFORM. "BDC_DYNPRO

----

Insert field *

----

FORM bdc_field USING fnam fval.

CLEAR bdcdata.

bdcdata-fnam = fnam.

bdcdata-fval = fval.

APPEND bdcdata.

ENDFORM. "BDC_Field

If it is helpful provide points.

Rgds,

P.Nag

Re: problem in b d c

Former Member — Thu, 12 Apr 2007 05:43:16 GMT

Hi,

Put a condition for Populating that Cost center field in the bdc

if ITAB-XBILK = 'X'

perform bdc using ...KOSTL..field

endif.

see the sample code for FS00

***********************************************************************

REPORT zfi_gl_fss0

NO STANDARD PAGE HEADING

LINE-SIZE 255.

Standard Include for Selection Screen

INCLUDE bdcrecx1.

Internal Table for Upload Data

DATA: BEGIN OF i_gl OCCURS 0,

saknr(010), " GL Account

bukrs(004), " Company Code

waers(005), " Currency

xsalh(001), " BAl Local Curr Ind

mwskz(002), " Tax Category

xopvw(001), " Open Item Ind
xkres(001), " Line Item Ind

zuawa(003), " Sort Key

fstag(004), " Field Category

END OF i_gl.

Data Variables & Constants

CONSTANTS : c_x VALUE 'X', " Flag

c_tax VALUE '0'. " Tax Category

Parameters

PARAMETERS: p_file LIKE ibipparms-path. " Filename

At selection-screen on Value Request for file Name

AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.

Get the F4 Values for the File

CALL FUNCTION 'F4_FILENAME'

EXPORTING

program_name = syst-cprog

dynpro_number = syst-dynnr

IMPORTING

file_name = p_file.

Start of Selection

START-OF-SELECTION.

Open the BDC Session

PERFORM open_group.

Upload the File into internal Table

CALL FUNCTION 'UPLOAD'

EXPORTING

filename = p_file

filetype = 'DAT'

TABLES

data_tab = i_gl

EXCEPTIONS

conversion_error = 1

invalid_table_width = 2

invalid_type = 3

no_batch = 4

unknown_error = 5

gui_refuse_filetransfer = 6

OTHERS = 7.

IF sy-subrc <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

Upload the Data from Internal Table

LOOP AT i_gl.

Initial Screen

PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN'

'2001'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ACC_CRE'.

PERFORM bdc_field USING 'BDC_CURSOR'

'GLACCOUNT_SCREEN_KEY-SAKNR'.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_KEY-SAKNR'

i_gl-saknr.

PERFORM bdc_field USING 'GLACCOUNT_SCREEN_KEY-BUKRS'

i_gl-bukrs.

perform bdc_dynpro using

'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=TAB02'.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-WAERS'

i_gl-WAERS.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XSALH'

i_gl-XSALH.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MWSKZ'

i_gl-MWSKZ.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_CCODE-ZUAWA'.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XOPVW'
i_gl-XOPVW.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XKRES'

c_x."i_gl-XKRES.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-ZUAWA'

i_gl-ZUAWA.

perform bdc_dynpro using

'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.

perform bdc_field using 'BDC_OKCODE'

'=SAVE'.

perform bdc_field using 'BDC_CURSOR'

'GLACCOUNT_SCREEN_CCODE-FSTAG'.

perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-FSTAG'

i_gl-FSTAG.

Call The Transaction

PERFORM bdc_transaction USING 'FSS0'.

ENDLOOP.

Close the BDC Session

PERFORM close_group.

reward points if useful

regards,

ANJI

Re: problem in b d c

Former Member — Thu, 12 Apr 2007 05:56:01 GMT

Hi Anji reddy, i have utilised a condition like

if itab-xbilk = ' ' .

perform bdc.....

which means when xbilk is initial it suold show the cost centre pop up. when it is 'X' it is not supposed to show the pop up. but iam getting pop up even it is 'X'.

in debugging mode i am getting it correctly. pls help me bcz it is urgent.

kumar.