topic Re: SO_NEW_DOCUMENT_ATT_SEND_API1 in Application Development and Automation Discussions

SO_NEW_DOCUMENT_ATT_SEND_API1

Former Member — Mon, 19 Feb 2007 11:22:51 GMT

Hai,

I am using the FM for sending email as attachement using the FM SO_NEW_DOCUMENT_ATT_SEND_API1

Even if i fill the table for content_txt ,text is not getting displayed in the mail im getting.

What might be the reason..plz help urgent???

Regards

Neeraj

Re: SO_NEW_DOCUMENT_ATT_SEND_API1

Former Member — Mon, 19 Feb 2007 11:25:13 GMT

Refer this code

http://www.sapdevelopment.co.uk/reporting/email/email_mbody.htm

Re: SO_NEW_DOCUMENT_ATT_SEND_API1

Former Member — Mon, 19 Feb 2007 11:27:23 GMT

DATA: LD_ERROR TYPE SY-SUBRC,

LD_RECIEVER TYPE SY-SUBRC,

LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,

LD_EMAIL LIKE SOMLRECI1-RECEIVER,

LD_FORMAT TYPE SO_OBJ_TP ,

LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,

LD_ATTFILENAME TYPE SO_OBJ_DES ,

LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,

LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,

LD_RECEIVER LIKE SY-SUBRC.

LD_EMAIL = P_EMAIL.

LD_MTITLE = P_MTITLE.

LD_FORMAT = P_FORMAT.

LD_ATTDESCRIPTION = P_ATTDESCRIPTION.

LD_ATTFILENAME = P_FILENAME.

LD_SENDER_ADDRESS = P_SENDER_ADDRESS.

LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.

Fill the document data.

W_DOC_DATA-DOC_SIZE = 1.

Populate the subject/generic message attributes

W_DOC_DATA-OBJ_LANGU = SY-LANGU.

W_DOC_DATA-OBJ_NAME = 'SAPRPT'.

W_DOC_DATA-OBJ_DESCR = LD_MTITLE .

W_DOC_DATA-SENSITIVTY = 'F'.

Fill the document data and get size of attachment

CLEAR W_DOC_DATA.

READ TABLE IT_ATTACH INDEX W_CNT.

W_DOC_DATA-DOC_SIZE =

( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).

W_DOC_DATA-OBJ_LANGU = SY-LANGU.

W_DOC_DATA-OBJ_NAME = 'SAPRPT'.

W_DOC_DATA-OBJ_DESCR = LD_MTITLE.

W_DOC_DATA-SENSITIVTY = 'F'.

CLEAR T_ATTACHMENT.

REFRESH T_ATTACHMENT.

T_ATTACHMENT[] = PIT_ATTACH[].

Describe the body of the message

CLEAR T_PACKING_LIST.

REFRESH T_PACKING_LIST.

T_PACKING_LIST-TRANSF_BIN = SPACE.

T_PACKING_LIST-HEAD_START = 1.

T_PACKING_LIST-HEAD_NUM = 0.

T_PACKING_LIST-BODY_START = 1.

T_PACKING_LIST-OBJ_NAME = 'stb'.

DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.

T_PACKING_LIST-DOC_TYPE = 'RAW'.

APPEND T_PACKING_LIST.

Create attachment notification

T_PACKING_LIST-TRANSF_BIN = 'X'.

T_PACKING_LIST-HEAD_START = 1.

T_PACKING_LIST-HEAD_NUM = 1.

T_PACKING_LIST-BODY_START = 1.

DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.

T_PACKING_LIST-DOC_TYPE = LD_FORMAT.

T_PACKING_LIST-DOC_TYPE = 'XLS'.

T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.

T_PACKING_LIST-OBJ_DESCR = 'Sales_STB'.

T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.

T_PACKING_LIST-OBJ_NAME = 'stb'.

T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.

APPEND T_PACKING_LIST.

Add the recipients email address

CLEAR T_RECEIVERS.

REFRESH T_RECEIVERS.

LOOP AT IT_RECV.

T_RECEIVERS-RECEIVER = IT_RECV-EMAIL.

T_RECEIVERS-REC_TYPE = 'U'.

T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-COPY = 'X'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.

APPEND T_RECEIVERS.

ENDLOOP.

CALL FUNCTION 'SO_DOCUMENT_SEND_API1'

EXPORTING

DOCUMENT_DATA = W_DOC_DATA

PUT_IN_OUTBOX = 'X'

SENDER_ADDRESS = LD_SENDER_ADDRESS

SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE

COMMIT_WORK = 'X'

IMPORTING

SENT_TO_ALL = W_SENT_ALL

TABLES

PACKING_LIST = T_PACKING_LIST

CONTENTS_BIN = T_ATTACHMENT

CONTENTS_TXT = IT_MESSAGE

RECEIVERS = T_RECEIVERS

EXCEPTIONS

TOO_MANY_RECEIVERS = 1

DOCUMENT_NOT_SENT = 2

DOCUMENT_TYPE_NOT_EXIST = 3

OPERATION_NO_AUTHORIZATION = 4

PARAMETER_ERROR = 5

X_ERROR = 6

ENQUEUE_ERROR = 7

OTHERS = 8.

Re: SO_NEW_DOCUMENT_ATT_SEND_API1

Former Member — Mon, 19 Feb 2007 11:28:15 GMT

Hi Neeraj,

there are lots of threads for similar problems

check following links.

this contains the code

http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm

hope this helps you.

Award helpful answers

Re: SO_NEW_DOCUMENT_ATT_SEND_API1

Former Member — Mon, 19 Feb 2007 11:31:00 GMT

Hi,

Go through this example Program:

----

INCLUDE ZINCUSMAIL *

----

include <symbol>.

data : i_doc_data like sodocchgi1.

data : begin of i_pack_list occurs 0.

include structure sopcklsti1.

data : end of i_pack_list.

data : begin of i_receivers occurs 0.

include structure somlreci1.

data : end of i_receivers.

data : begin of i_contents occurs 0.

include structure solisti1.

data : end of i_contents.

data : begin of i_header occurs 0.

include structure solisti1.

data : end of i_header.

data : begin of i_att occurs 0.

include structure solisti1.

data : end of i_att.

Internal Table for Internet address.

data: begin of it_inad occurs 0,

kunnr like kna1-kunnr, " Customer Code

name1 like kna1-name1, " Customer Name

ssobl like knkk-ssobl, " Security Deposit

klimk like knkk-klimk, " Credit Limit

opbal like bsid-wrbtr, " Opening Balance

clbal like bsid-wrbtr, " Closing Balance

smtp like adr6-smtp_addr, " Internet mail (SMTP) address

end of it_inad.

data : pdf_line(134),

asdf like pdf_line occurs 0 with header line.

data : pdf_table like tline occurs 0 with header line,

pdf_fsize type i.

data : stuff(65000),

len type i,

pos type i,

tab_lines like sy-tabix.

data: spoolid type tsp01-rqident,

spdel type tsp01sys.

data: v_gjahrt like bsid-gjahr,

fmondest(10),

tmondest(10),

kunnr1 like kna1-kunnr,

gjah(4),

fmon(10).

&----

*& Form hide_write

&----

form hide_write.

new-page print on

line-size 160

line-count 58

no-title

no-heading

destination 'LOCL'

immediately ' '

new list identification 'X'

no dialog.

set blank lines on.

endform. " hide_write

&----

*& Form end_write

&----

form end_write using kunnr1.

set blank lines off.

new-page print off.

***Using Spoolid we are getting PDF formated file

spoolid = spdel-rqident = sy-spono.

spdel-sys = sy-sysid.

call function 'CONVERT_ABAPSPOOLJOB_2_PDF'

exporting

src_spoolid = spoolid

no_dialog = 'X'

importing

pdf_bytecount = pdf_fsize

tables

pdf = pdf_table

exceptions

others = 0.

***Delleting Spool request

call function 'RSPO_IDELETE_SPOOLREQ'

exporting

spoolreq = spdel

exceptions

others = 2.

***Converting PDF table line size 134 into standard list size 255

loop at pdf_table into pdf_line.

if pos = 34170.

perform attach.

endif.

stuff+pos(134) = pdf_line.

add 134 to pos.

endloop.

if not ( stuff is initial ).

perform attach.

endif.

clear pdf_line.

clear pdf_table[].

describe table i_att lines tab_lines.

i_pack_list-transf_bin = 'X'.

i_pack_list-head_start = '1'.

i_pack_list-head_num = '1'.

i_pack_list-body_start = '1'.

i_pack_list-body_num = tab_lines.

i_pack_list-doc_type = 'PDF'.

i_pack_list-obj_name = 'LedgerMail'.

concatenate fmon '-' gjah into i_pack_list-obj_descr.

*i_pack_list-obj_descr = '2092-Oct03'.

i_pack_list-obj_langu = 'E'.

i_pack_list-doc_size = tab_lines * 255.

append i_pack_list.

***Data for receivers list

loop at it_inad where kunnr eq kunnr1.

i_receivers-receiver = it_inad-smtp.

i_receivers-rec_type = 'U'.

i_receivers-rec_date = sy-datum.

i_receivers-express = 'X'.

i_receivers-com_type = 'INT'.

i_receivers-notif_del = 'X'.

append i_receivers.

endloop.

call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'

exporting

document_data = i_doc_data

PUT_IN_OUTBOX = ' '
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =

tables

packing_list = i_pack_list

object_header = i_header

contents_bin = i_att

contents_txt = i_contents

receivers = i_receivers

exceptions

too_many_receivers = 1

document_not_sent = 2

document_type_not_exist = 3

operation_no_authorization = 4

parameter_error = 5

x_error = 6

enqueue_error = 7

others = 8

refresh i_att. clear i_att.

refresh i_receivers. clear i_receivers.

delete i_pack_list where doc_type = 'PDF'.

*refresh i_header.

*refresh i_contents.

*clear i_doc_data.

endform. " end_write

&----

*& Form doc_data

&----

form doc_data using fmondest v_gjahrt.

gjah = v_gjahrt.

fmon = fmondest.

***Data for Document Data

i_doc_data-obj_name = 'LedgerMail'.

concatenate 'Customer Ledger for : ' fmondest gjah

into i_doc_data-obj_descr separated by space.

i_doc_data-obj_langu = 'E'.

i_doc_data-obj_prio = '1'.

i_doc_data-no_change = 'X'.

i_doc_data-doc_size = '5101'.

***Data for Packing list

i_pack_list-head_start = '1'.

i_pack_list-head_num = '1'.

i_pack_list-body_start = '1'.

i_pack_list-body_num = '20'.

i_pack_list-doc_type = 'RAW'.

i_pack_list-obj_langu = 'E'.

append i_pack_list.

***Data for Header

i_header-line = 'Header'. append i_header.

***Data for contents

i_contents-line = 'Dear Customer,'. append i_contents.