topic Re: Need to Create a Sales Order Using BAPI.... in Application Development and Automation Discussions

Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 12:47:38 GMT

Hello Gurus,

I have called 'BAPI_SALESORDER_CREATEFROMDAT2' n a FM and trying to create a Sales Order. I have passed the header (auart, vkorg, vtweg, spart) and partner (nmbr and role). I passed the parameters to BAPI but in the return messages it says 'Sales Document was not changed V4 E'.

I hope I am clear, if not please ask...

Suggestions would be rewarded....

Regards

Leo

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 13:14:50 GMT

Hi Leo,

The BAPI u are using is Obsolete. Try creating Slaes Order using following BAPI:

BAPI_SALESORDER_CREATEFROMDAT2 if you are working on 4.6 or latest version.

Ashven

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 13:21:26 GMT

Ashven,

I am using that BAPI only, you can check my prev message....it doesnt say any error while calling.. when executed it gives out that message... I am on ECC 5.0

Suggestions would be rewarded...

Regards

Leo

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 13:41:31 GMT

Hi Leo,

Check out the following codes:

Even I have worked in ECC 5.0.These are the mandatory parametersthat u need to pass to create a Sales Order successfully...

REPORT Z6SKS_HERSHEYS2.

data : order_header_in1 type BAPISDHD1.

data: order_partners1 type BAPIPARNR occurs 0 with header line.

data: ORDER_ITEMS_IN1 type BAPISDITM occurs 0 with header line.

DATA : SALESDOCUMENT1 TYPE BAPIVBELN-VBELN.

DATA : RETURN1 TYPE BAPIRET2 OCCURS 0.

DATA : RETURN2 TYPE BAPIRET2.

order_header_in1-doc_type = 'TA'.

order_header_in1-sales_org = '0001'.

order_header_in1-distr_chan = '01'.

order_header_in1-division = '01'.

ORDER_ITEMS_IN1-material = '000000000000000013'.

append ORDER_ITEMS_IN1.

order_partners1-PARTN_ROLE = 'WE'.

order_partners1-PARTN_NUMB = '0000000017'.

APPEND order_partners1.

Perform call_function.

&----

*& Form call_function

&----

text

----

--> p1 text
<-- p2 text

----

form call_function .

CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'

EXPORTING

SALESDOCUMENTIN =

order_header_in = order_header_in1

ORDER_HEADER_INX =
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '

IMPORTING

SALESDOCUMENT = SALESDOCUMENT1

tables

RETURN = RETURN1

ORDER_ITEMS_IN = ORDER_ITEMS_IN1

ORDER_ITEMS_INX =

order_partners = order_partners1

ORDER_SCHEDULES_IN =
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN =
ORDER_CONDITIONS_INX =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =

IF NOT SALESDOCUMENT1 IS INITIAL.

CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

EXPORTING
WAIT =

IMPORTING

RETURN = RETURN2

ELSE.

CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'

IMPORTING
RETURN =

ENDIF.

endform. " call_function

This should help u...

Please reward points if found useful...

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 13:48:44 GMT

Hi,

sorry it was by mistake.

Are u passing Item number also in table ORDER_PARTNERS?

If yes can you paste the code you have written for bapi?

Ashven

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:08:16 GMT

Thanks Susanth and Ashven for your Suggestions...the code is more or less same as what Susanth gave..here the code.. still it gives a message that "Sales Document was not changed V4 E".....

It would be great..if this is resolved .

DATA : HEADER TYPE BAPISDHD1 OCCURS 0 WITH HEADER LINE,

PARTNER TYPE BAPIPARNR OCCURS 0 WITH HEADER LINE,

ITEMS TYPE BAPISDITM OCCURS 0 WITH HEADER LINE,

SAL_NUM LIKE BAPIVBELN-VBELN,

REC_NUM TYPE BAPIVBELN-VBELN,

RET TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.

HEADER-DOC_TYPE = 'TA'.

HEADER-SALES_ORG = '0001'.

HEADER-DIVISION = '01'.

HEADER-DISTR_CHAN = '01'.

APPEND HEADER.

PARTNER-ITM_NUMBER = '0000000020'.

PARTNER-PARTN_ROLE = 'WE'.

ITEMS-MATERIAL = '000000000000000013'.

APPEND ITEMS.

SAL_NUM = '0000001234'.

*CALL FUNCTION 'CONVERSION_EXIT_PARVW_OUTPUT'

EXPORTING
input = PARTNER-PARTN_ROLE
IMPORTING

OUTPUT = PARTNER-PARTN_ROLE .

APPEND PARTNER.

CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'

EXPORTING

SALESDOCUMENTIN = SAL_NUM

order_header_in = HEADER

ORDER_HEADER_INX =
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '

IMPORTING

SALESDOCUMENT = REC_NUM

tables

RETURN = RET

ORDER_ITEMS_IN = ITEMS

ORDER_ITEMS_INX =

order_partners = PARTNER.

ORDER_SCHEDULES_IN =
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN =
ORDER_CONDITIONS_INX =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =

IF NOT REC_NUM IS INITIAL.

CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

EXPORTING
WAIT =
IMPORTING
RETURN = RETURN2

ELSE.

CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'

IMPORTING
RETURN =

ENDIF

WRITE:/ REC_NUM.

WRITE:/ RET-MESSAGE, RET-ID, RET-TYPE.

Any sort of help would be rewarded....

Regards

Leo

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:23:49 GMT

u have to pass the update flag else it wont work.

pass values to this parameter in export.

data headerx type BAPISDHD1X.

headerx-UPDATEFLAG = ' I '.

data itemx type BAPISDITMX OCCURS 0 WITH HEADER LINE.

itemx-UPDATEFLAG = ' I '.

ORDER_HEADER_INX = headerx.

pass values in tables also.

ORDER_ITEMS_INX = itemx.

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:28:18 GMT

Hi Leo,

Why dont u try with some other parameters and check whether u r getting the same error or not....

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:33:30 GMT

Hi Leo,

Could you tell about data you have mentioned is actual data u are passng to bapi. e.g. Item Number are passing 10 cahracter(000000020) or six(000020)? As you have mentioned in your code.

PARTNER-ITM_NUMBER = '0000000020'.

PARTNER-PARTN_ROLE = 'WE'.

Do one thing Write BREAK-POINT before

CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2' and check weather all the table & structures are gettng populated correctly or not?

The code you have written seems correct.

Ashven

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:41:45 GMT

Hi, I tried that it says the same error ( Sales Document was not changed V4 E) but I want to know is there any diff between....

data : header type BAPISDHD and

data : header type BAPISDHD occurs 0 with header line....coz in your code and susanth code you havent specified the Occurs 0.....

if i remove that it says "header is not an internal table"......

Heres the Code....

DATA : HEADER TYPE BAPISDHD1 OCCURS 0 WITH HEADER LINE,

HEADERX TYPE BAPISDHD1X OCCURS 0 WITH HEADER LINE,

PARTNER TYPE BAPIPARNR OCCURS 0 WITH HEADER LINE,

ITEMS TYPE BAPISDITM OCCURS 0 WITH HEADER LINE,

ITEMSX TYPE BAPISDITMX OCCURS 0 WITH HEADER LINE,

SAL_NUM LIKE BAPIVBELN-VBELN,

REC_NUM TYPE BAPIVBELN-VBELN,

RET TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.

HEADER-DOC_TYPE = 'TA'.

HEADER-SALES_ORG = '0001'.

HEADER-DIVISION = '01'.

HEADER-DISTR_CHAN = '01'.

APPEND HEADER.

HEADERX-UPDATEFLAG = 'I'.

APPEND HEADERX.

PARTNER-ITM_NUMBER = '0000000020'.

PARTNER-PARTN_ROLE = 'WE'.

ITEMS-MATERIAL = '000000000000000013'.

APPEND ITEMS.

ITEMSX-UPDATEFLAG = 'I'.

APPEND ITEMSX.

SAL_NUM = '0000001234'.

*CALL FUNCTION 'CONVERSION_EXIT_PARVW_OUTPUT'

EXPORTING
input = PARTNER-PARTN_ROLE
IMPORTING

OUTPUT = PARTNER-PARTN_ROLE .

APPEND PARTNER.

CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'

EXPORTING

SALESDOCUMENTIN = SAL_NUM

order_header_in = HEADER

ORDER_HEADER_INX = HEADERX

SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '

IMPORTING

SALESDOCUMENT = REC_NUM

tables

RETURN = RET

ORDER_ITEMS_IN = ITEMS

ORDER_ITEMS_INX = ITEMSX

order_partners = PARTNER.

ORDER_SCHEDULES_IN =
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN =
ORDER_CONDITIONS_INX =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =

IF NOT REC_NUM IS INITIAL.

CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

EXPORTING
WAIT =
IMPORTING
RETURN = RETURN2

ELSE.

CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'

IMPORTING
RETURN =

ENDIF

WRITE:/ REC_NUM.

WRITE:/ RET-MESSAGE, RET-ID, RET-TYPE.

it will be great if anybody try to resolve....and any sort of suggestions would be highy appreciated...

Thanks n Advance

Leo

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:45:06 GMT

Hey Leo,

I think I have got ur answer...

Please compare my code and urs...The code that i have sent is running fine at my end.When I went through ur code.....I found that u have assigned:

PARTNER-ITM_NUMBER = '0000000020'. instead of field

PARTNER-PARTN_NUMB = '0000000017'.

Your final code should be:

DATA : HEADER TYPE BAPISDHD1." OCCURS 0 WITH HEADER LINE,

DATA: PARTNER TYPE BAPIPARNR OCCURS 0 WITH HEADER LINE,

ITEMS TYPE BAPISDITM OCCURS 0 WITH HEADER LINE,

SAL_NUM LIKE BAPIVBELN-VBELN,

REC_NUM TYPE BAPIVBELN-VBELN,

RET TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.

HEADER-DOC_TYPE = 'TA'.

HEADER-SALES_ORG = '0001'.

HEADER-DIVISION = '01'.

HEADER-DISTR_CHAN = '01'.

*APPEND HEADER.

PARTNER-PARTN_NUMB = '0000000020'.

PARTNER-PARTN_ROLE = 'WE'.

APPEND PARTNER.

ITEMS-MATERIAL = '000000000000000013'.

APPEND ITEMS.

*CALL FUNCTION 'CONVERSION_EXIT_PARVW_OUTPUT'

EXPORTING
input = PARTNER-PARTN_ROLE
IMPORTING

OUTPUT = PARTNER-PARTN_ROLE .

CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'

EXPORTING

SALESDOCUMENTIN = SAL_NUM

order_header_in = HEADER

ORDER_HEADER_INX =
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '

IMPORTING

SALESDOCUMENT = REC_NUM

tables

RETURN = RET

ORDER_ITEMS_IN = ITEMS

ORDER_ITEMS_INX =

order_partners = PARTNER.

ORDER_SCHEDULES_IN =
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN =
ORDER_CONDITIONS_INX =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =.

IF NOT REC_NUM IS INITIAL.

CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

EXPORTING
WAIT =
IMPORTING
RETURN = RETURN2

ELSE.

CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'

IMPORTING
RETURN =

ENDIF

WRITE:/ REC_NUM.

WRITE:/ RET-MESSAGE, RET-ID, RET-TYPE.

Also note that u were passing an internal table for Header.I have changed it ot Structure...

Please correct and execute it.You should have no problem now..

Please mark useful answers......

Message was edited by:

Susanth Swain

Message was edited by:

Susanth Swain

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:50:15 GMT

Ashven

Its 6 character and that what i debugged and did in my previous post regarding the Header one....coz while i debugged i can see the partners internal table contents but if its for header its not showin up the contents....there what i got a doubt whether to add "occurs 0 with header line...

Regards

Leo

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:52:42 GMT

if u use occurs 0 its an internal table without that its a work area.

instead of ' I ' use 'U' ad update flag & check.

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:52:43 GMT

Leo,

Please check the code I have sent the latest.You should be able to solve by now...

Please mark useful answers....

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 14:57:36 GMT

DATA : HEADER TYPE BAPISDHD1 OCCURS 0 WITH HEADER LINE,

HEADERX TYPE BAPISDHD1X ,

PARTNER TYPE BAPIPARNR OCCURS 0 WITH HEADER LINE,

ITEMS TYPE BAPISDITM OCCURS 0 WITH HEADER LINE,

ITEMSX TYPE BAPISDITMX OCCURS 0 WITH HEADER LINE,

SAL_NUM LIKE BAPIVBELN-VBELN,

REC_NUM TYPE BAPIVBELN-VBELN,

RET TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.

HEADER-DOC_TYPE = 'TA'.

HEADER-SALES_ORG = '0001'.

HEADER-DIVISION = '01'.

HEADER-DISTR_CHAN = '01'.

APPEND HEADER.

HEADERX-UPDATEFLAG = 'I'.

PARTNER-ITM_NUMBER = '0000000020'.

PARTNER-PARTN_ROLE = 'WE'.

ITEMS-MATERIAL = '000000000000000013'.

APPEND ITEMS.

ITEMSX-UPDATEFLAG = 'I'.

SAL_NUM = '0000001234'.

*CALL FUNCTION 'CONVERSION_EXIT_PARVW_OUTPUT'

EXPORTING
input = PARTNER-PARTN_ROLE
IMPORTING

OUTPUT = PARTNER-PARTN_ROLE .

APPEND PARTNER.

CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'

EXPORTING

SALESDOCUMENTIN = SAL_NUM

order_header_in = HEADER

ORDER_HEADER_INX = HEADERX

SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '

IMPORTING

SALESDOCUMENT = REC_NUM

tables

RETURN = RET

ORDER_ITEMS_IN = ITEMS

ORDER_ITEMS_INX = ITEMSX

order_partners = PARTNER.

ORDER_SCHEDULES_IN =
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN =
ORDER_CONDITIONS_INX =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =

IF NOT REC_NUM IS INITIAL.

CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

EXPORTING
WAIT =
IMPORTING
RETURN = RETURN2

ELSE.

CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'

IMPORTING
RETURN =

ENDIF

WRITE:/ REC_NUM.

WRITE:/ RET-MESSAGE, RET-ID, RET-TYPE.

copy this code & execute it if u get any error tell me the error.

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 15:11:13 GMT

Kalpa nashri and Sushanth...I have tried both your suggestions......It displays the message from BAPIRET2 " Sales Document cannot be Changed V4 E".....

Kalpa nashri...I have tried both using 'U' and 'I', same error....and

Susanth... I meant POSNR only, the diff is two fields but mandatory ORDER_PARTNERS s there......it gives same error watever i have modified...

How come me creating a Sales Order...giving a message "Sales Document cannot be changed".....

===========================================================

DATA : HEADER TYPE BAPISDHD1,

HEADERX TYPE BAPISDHD1X,

PARTNER TYPE BAPIPARNR OCCURS 0 WITH HEADER LINE,

ITEMS TYPE BAPISDITM OCCURS 0 WITH HEADER LINE,

ITEMSX TYPE BAPISDITMX OCCURS 0 WITH HEADER LINE,

SAL_NUM LIKE BAPIVBELN-VBELN,

REC_NUM TYPE BAPIVBELN-VBELN VALUE IS INITIAL,

RET TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.

HEADER-DOC_TYPE = 'TA'.

HEADER-SALES_ORG = '0001'.

HEADER-DIVISION = '01'.

HEADER-DISTR_CHAN = '01'.

*APPEND HEADER.

HEADERX-UPDATEFLAG = 'I'.

*APPEND HEADERX

PARTNER-ITM_NUMBER = '000020'.

PARTNER-PARTN_ROLE = 'WE'.

ITEMS-MATERIAL = '000000000000000013'.

APPEND ITEMS.

ITEMSX-UPDATEFLAG = 'I'.

APPEND ITEMSX.

SAL_NUM = '0000001234'.

*CALL FUNCTION 'CONVERSION_EXIT_PARVW_OUTPUT'

EXPORTING
input = PARTNER-PARTN_ROLE
IMPORTING

OUTPUT = PARTNER-PARTN_ROLE .

APPEND PARTNER.

CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'

EXPORTING

SALESDOCUMENTIN = SAL_NUM

order_header_in = HEADER

ORDER_HEADER_INX = HEADERX

SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '

IMPORTING

SALESDOCUMENT = REC_NUM

tables

RETURN = RET

ORDER_ITEMS_IN = ITEMS

ORDER_ITEMS_INX = ITEMSX

order_partners = PARTNER.

ORDER_SCHEDULES_IN =
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN =
ORDER_CONDITIONS_INX =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =

IF NOT REC_NUM IS INITIAL.

CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

EXPORTING
WAIT =
IMPORTING
RETURN = RETURN2

ELSE.

CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'

IMPORTING
RETURN =

ENDIF

WRITE:/ REC_NUM.

WRITE:/ RET-MESSAGE, RET-ID, RET-TYPE.

===========================================================

Regards

Leo

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 15:20:06 GMT

Hey why dont u pass the posnr also along with kunnr(PARTN_NUMB) and parvw(PARTN_ROLE)....

This is working fine at my end..

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 15:21:14 GMT

check whether number 0000001234 already exists in VA02 transaction

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 15:26:19 GMT

Hi Leo,

I tried your code by changing the code at following place.

HEADERX-UPDATEFLAG = 'X'.

ITEMSX-UPDATEFLAG = 'X'.

Now it is throwing One more error "Please enter sold-to party or ship-to part".

So you need to pass these fields also because in documention of BAPI it mentined that these fields are MANDATORY. Pass these fields.

If you pass above mentioned entries you problem will be solved.

And you can delcare HEADER & HEADERX without occurs 0 becuse these are strucutes in bapi & you need pass these as structurs not as tables. It was showing you error because you were writing:

APPEND HEADERX

APPEND HEADER

no need of writing append if you are declaring these as wothout occurs 0.

NOTE: TAKE CARE OF THE FOLLOWING:

1. Mandatory entries:

ORDER_HEADER_IN : DOC_TYPE Sales document type

SALES_ORG Sales organization

DISTR_CHAN Distribution channel

DIVISION Division

ORDER_PARTNERS..: PARTN_ROLE Partner role, SP sold-to party

PARTN_NUMB Customer number

ORDER_ITEMS_IN..: MATERIAL Material number

2. Ship-to party:

If no ship-to party is entered, use the following: Ship-to party =

sold-to party.

3. Commit control:

The BAPI does not have a database commit. This means that the relevant application must leave the commit, in order that can be carried out on on the database. The BAPI BAPI_TRANSACTION_COMMIT is available for this.

4. German key words:

The following key words must be entered in German, independantly of

the logon language:

DOC_TYPE Sales document type, for example: TA for standard order

PARTN_ROLE Partner role, for example: WE for ship-to party

Further information

You can find further information in the OSS. The note 93091 contains general information on the BAPIs in SD.

Ashvender

Re: Need to Create a Sales Order Using BAPI....

Former Member — Fri, 09 Feb 2007 15:53:24 GMT

Ashvendar, I have checked b4 calling BAPI and I believe if u code I or U instead of X with STP it shld not come...

Sushant, I have tried that still it says the same....

Kalpa nashri...i checked it said not n the dbase or archived....can any one do me a favour....you might have done this....can u copy the code and run it n ur system.....and pls chk wat error it says....that would be gr8...

===========================================================

DATA : HEADER TYPE BAPISDHD1,

HEADERX TYPE BAPISDHD1X,

PARTNER TYPE BAPIPARNR OCCURS 0 WITH HEADER LINE,

ITEMS TYPE BAPISDITM OCCURS 0 WITH HEADER LINE,

ITEMSX TYPE BAPISDITMX OCCURS 0 WITH HEADER LINE,

SAL_NUM LIKE BAPIVBELN-VBELN,

REC_NUM TYPE BAPIVBELN-VBELN VALUE IS INITIAL,

RET TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.

HEADER-DOC_TYPE = 'TA'.

HEADER-SALES_ORG = '0001'.

HEADER-DIVISION = '01'.

HEADER-DISTR_CHAN = '01'.

*APPEND HEADER.

HEADERX-UPDATEFLAG = 'I'.

*APPEND HEADERX

PARTNER-ITM_NUMBER = '000020'.

PARTNER-PARTN_ROLE = 'WE'.

PARTNER-PARTN_NUMB = '0000003512'.

APPEND PARTNER.

ITEMS-MATERIAL = '000000000000000013'.

APPEND ITEMS.

ITEMSX-UPDATEFLAG = 'U'.

APPEND ITEMSX.

SAL_NUM = '0000001111'.

*CALL FUNCTION 'CONVERSION_EXIT_PARVW_OUTPUT'

EXPORTING
input = PARTNER-PARTN_ROLE
IMPORTING

OUTPUT = PARTNER-PARTN_ROLE .

CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'

EXPORTING

SALESDOCUMENTIN = SAL_NUM

order_header_in = HEADER

ORDER_HEADER_INX = HEADERX

SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '

IMPORTING

SALESDOCUMENT = REC_NUM

tables

RETURN = RET

ORDER_ITEMS_IN = ITEMS

ORDER_ITEMS_INX = ITEMSX

order_partners = PARTNER.

ORDER_SCHEDULES_IN =
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN =
ORDER_CONDITIONS_INX =
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =

IF NOT REC_NUM IS INITIAL.

CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

EXPORTING
WAIT =
IMPORTING
RETURN = RETURN2

ELSE.

CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'

IMPORTING
RETURN =

ENDIF

WRITE:/ REC_NUM.

WRITE:/ RET-MESSAGE, RET-ID, RET-TYPE.

===========================================================

Regards

Leo