topic RE: user exits in Application Development and Automation Discussions

RE: user exits

Former Member — Thu, 15 Feb 2007 10:33:35 GMT

what are the user exits for IW31&IW32

Re: RE: user exits

Former Member — Thu, 15 Feb 2007 10:35:23 GMT

Hello,

The exit for the Tcode IW31 & IW32 is

Transaction Code - IW31 Create Order

Exit Name Description

IWO10012 Maintenance order: Priority handling on central header

No of Exits: 1

U could use this report to get all the exit of a particular Tcode.

REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.

TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.

TABLES : TSTCT.

DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.

DATA : FIELD1(30).

DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.

PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.

SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.

IF SY-SUBRC EQ 0.

SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'

AND OBJECT = 'PROG'

AND OBJ_NAME = TSTC-PGMNA.

MOVE : TADIR-DEVCLASS TO V_DEVCLASS.

IF SY-SUBRC NE 0.

SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.

IF TRDIR-SUBC EQ 'F'.

SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.

SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =

TFDIR-FUNCNAME.

SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'

AND OBJECT = 'FUGR'

AND OBJ_NAME EQ ENLFDIR-AREA.

MOVE : TADIR-DEVCLASS TO V_DEVCLASS.

ENDIF.

SELECT * FROM TADIR INTO TABLE JTAB

WHERE PGMID = 'R3TR'

AND OBJECT = 'SMOD'

AND DEVCLASS = V_DEVCLASS.

SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND

TCODE EQ P_TCODE.

FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.

WRITE:/(19) 'Transaction Code - ',

20(20) P_TCODE,

45(50) TSTCT-TTEXT.

SKIP.

IF NOT JTAB[] IS INITIAL.

WRITE:/(95) SY-ULINE.

FORMAT COLOR COL_HEADING INTENSIFIED ON.

WRITE:/1 SY-VLINE,

2 'Exit Name',

21 SY-VLINE ,

22 'Description',

95 SY-VLINE.

WRITE:/(95) SY-ULINE.

LOOP AT JTAB.

SELECT SINGLE * FROM MODSAPT

WHERE SPRSL = SY-LANGU AND

NAME = JTAB-OBJ_NAME.

FORMAT COLOR COL_NORMAL INTENSIFIED OFF.

WRITE:/1 SY-VLINE,

2 JTAB-OBJ_NAME HOTSPOT ON,

21 SY-VLINE ,

22 MODSAPT-MODTEXT,

95 SY-VLINE.

ENDLOOP.

WRITE:/(95) SY-ULINE.

DESCRIBE TABLE JTAB.

SKIP.

FORMAT COLOR COL_TOTAL INTENSIFIED ON.

WRITE:/ 'No of Exits:' , SY-TFILL.

ELSE.

FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.

WRITE:/(95) 'No User Exit exists'.

ENDIF.

ELSE.

FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.

WRITE:/(95) 'Transaction Code Does Not Exist'.

ENDIF.

AT LINE-SELECTION.

GET CURSOR FIELD FIELD1.

CHECK FIELD1(4) EQ 'JTAB'.

SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).

CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

*************************************************************

Vasanth

Re: RE: user exits

Former Member — Thu, 15 Feb 2007 10:36:05 GMT

Hi!

Area: Maintenance and service orders

o IWO10001 Creation of maintenance sub-order

o IWO10002 Maintenance order: Customer check for order release

o IWO10004 Maintenance order: Customer check for order completion

o IWO10005 Maintenance order: Customer-specific determination of

profit center

o IWO10006 Maintenance order: Exclusion of function codes through

customer enhancements

o IWO10007 Maintenance order: Customer enhancement for permits in

order

o IWO10008 Maintenance order: Determination of tax jurisdiction code

o IWO10009 Maintenance order: Customer check for "Saving"

o IWO10010 Maintenance order: Determination of WBS element

o IWO10011 Maintenance order: Component selection

o IWO10012 Maintenance order: Priority treatment on central header

o IWO10015 Maintenance order: F4 Help for user fields on operation

o IWO10016 Maintenance order: Check of operation user fields

o IWO10017 Determination of external order number by customer logic

o IWO10018 Maintenance order: User fields on order header

o IWO10020 Maintenance order: Automatic inclusion of task list

o IWO10021 Automatic task list transfer for order creation for

notification

o IWO10022 Determine calendar from customer exit

o IWO10023 Service order: Changes to header data for advance shipment

o IWO10024 Service order: Changes to items for advance shipment

o IWO10025 Maintenance/service order: Determination of responsible

cost center

o IWO10026 User check when setting status "Do not perform"

o IWO10027 Generate user-specific settlement rule

o IWO10029 Inclusion of bill of material in maintenance/service order

o IWO10030 Pre-filling the fields for the result object

o IWO10031 Hiding the employee number in the maintenance-/service

order

o IWO10033 Customer-specific authorization check maintenance-/service

order (triggered by BAdI IWO1_ORDER_BADI)

o IWO10034 Operation status based on the status of the capacity

requirement

o COI20001 Change of persons determined

o COI20002 Alternative procurement of the employee availability data

o CYPP0001 Change of the sequential criteria and the sequential

planning

o IWO20001 Maintenance order: Task list transfer in order

o ICSV0004 Check maintenance object and display object information

o CNEX0013 Maintenance order: Proposal for item category for component

assignment

o CNEX0026 Maintenance order: General check for material

o CNEX0027 Maintenance order: Determination of plant or storage

location for component

o COZF0001 Maintenance order: Change purchase requisition for external

operation

o COZF0002 Maintenance order: Change purchase requisition for external

component

Regards

Tamá

Re: RE: user exits

p291102 — Thu, 15 Feb 2007 10:37:57 GMT

Hi,

I have one program man. U can find out for which TC u can find the userexits are available for that man.

REPORT YMS_USEREXITSTEST no standard page heading.

tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.

tables : tstct.

data : jtab like tadir occurs 0 with header line.

data : field1(30).

data : v_devclass like tadir-devclass.

parameters : p_tcode like tstc-tcode obligatory.

select single * from tstc where tcode eq p_tcode.

if sy-subrc eq 0.

select single * from tadir where pgmid = 'R3TR'

and object = 'PROG'

and obj_name = tstc-pgmna.

move : tadir-devclass to v_devclass.

if sy-subrc ne 0.

select single * from trdir where name = tstc-pgmna.

if trdir-subc eq 'F'.

select single * from tfdir where pname = tstc-pgmna.

select single * from enlfdir where funcname = tfdir-funcname.

select single * from tadir where pgmid = 'R3TR' and object = 'FUGR' and

obj_name eq enlfdir-area.

move : tadir-devclass to v_devclass.

endif.

select * from tadir into table jtab where pgmid = 'R3TR' and object =

'SMOD' and devclass = v_devclass.

select single * from tstct where sprsl eq sy-langu and tcode eq p_tcode.

format color col_positive intensified off.

write:/(19) 'Transaction Code - ',

20(20) p_tcode,

45(50) tstct-ttext.

skip.

if not jtab[] is initial.

write:/(95) sy-uline.

format color col_heading intensified on.

write:/1 sy-vline,

2 'Exit Name',

21 sy-vline ,

22 'Description',

95 sy-vline.

write:/(95) sy-uline.

loop at jtab.

select single * from modsapt where sprsl = sy-langu and name =

jtab-obj_name.

format color col_normal intensified off.

write:/1 sy-vline,

2 jtab-obj_name hotspot on,

21 sy-vline ,

22 modsapt-modtext,

95 sy-vline.

endloop.

write:/(95) sy-uline.

describe table jtab.

skip.

format color col_total intensified on.

write:/ 'No of Exits:' , sy-tfill.

else.

format color col_negative intensified on.

write:/(95) 'No User Exit exists'.

endif.

else.

format color col_negative intensified on.

write:/(95) 'Transaction Code Does Not Exist'.

endif.

at line-selection.

get cursor field field1.

check field1(4) eq 'JTAB'.

set parameter id 'MON' field sy-lisel+1(10).

call transaction 'SMOD' and skip first screen.

~~-End of Program~~-

Thanks,

Shankar

Re: RE: user exits

Former Member — Thu, 15 Feb 2007 10:39:12 GMT

Go to tht perticular Tcode IW31&IW32

Go to menu bar SYSTEM ->STATUS

we can get program name. open tht program in ATTRIBUTES we can find PACKAGE name.

Go to SMOD give tht package name ,now we get all exits

Regards