ALV editing problem(+)

Former Member — Thu, 21 Sep 2006 08:41:08 GMT

Hello,

I'm using 'REUSE_ALV_GRID_DISPLAY' to display and edit table represented in ALV format. I also use custom 'USER_COMMAND' routine, with my own GUI-status. When I edit some value in ALV, and then press one of my custom buttons (without pressing ENTER or TAB), value in the cell remains unchanged. Event DATA_CHANGED, however, remains untriggered in this case.

How can I overcome this trouble?

Thanks in advance.

Re: ALV editing problem(+)

uwe_schieferstein — Thu, 21 Sep 2006 08:58:09 GMT

Hello Cyrill

In the case of OO-based Grid control the logic is as following:

(1) At PAI call method CHECK_DATA_CHANGED

(2) If data have been edited in the Grid control then event DATA_CHANGED is fired.

(3) In the event-handler methods for DATA_CHANGED any validations can be done.

(4) Ensure that PAI is passed followed by PBO (otherwise the values in the editable Grid control remain unchanged).

Perhaps in your case you do not pass PAI followed by PBO. You can force this by calling CL_GUI_CFW=>SET_NEW_OK_CODE. You don't have to handle this ok-code in PAI at all. It's just required to pass PAI.

Regards

Uwe

Re: ALV editing problem(+)

Former Member — Thu, 21 Sep 2006 09:02:41 GMT

Hi,

*&---------------------------------------------------------------------*
*& Report  ZDEMO_ALVGRID_EDIT                                          *
*&                                                                     *
*&---------------------------------------------------------------------*
*&                                                                     *
*& Example of a simple ALV Grid Report                                 *
*& ...................................                                 *
*&                                                                     *
*& The basic ALV grid, Enhanced to display specific fields as          *
*& editable depending on field value                                   *
*&---------------------------------------------------------------------*

REPORT  ZDEMO_ALVGRID_EDIT                 .

TABLES:     ekko.

TYPE-POOLS: slis.                                 "ALV Declarations
*Data Declaration
*----------------
TYPES: BEGIN OF t_ekko,
  ebeln TYPE ekpo-ebeln,
  ebelp TYPE ekpo-ebelp,
  statu TYPE ekpo-statu,
  aedat TYPE ekpo-aedat,
  matnr TYPE ekpo-matnr,
  menge TYPE ekpo-menge,
  meins TYPE ekpo-meins,
  netpr TYPE ekpo-netpr,
  peinh TYPE ekpo-peinh,
  field_style  TYPE lvc_t_styl, "FOR DISABLE
 END OF t_ekko.

DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.

*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: it_fieldcat TYPE lvc_t_fcat,     "slis_t_fieldcat_alv WITH HEADER LINE,
      wa_fieldcat TYPE lvc_s_fcat,

      gd_tab_group TYPE slis_t_sp_group_alv,
      gd_layout    TYPE lvc_s_layo,     "slis_layout_alv,
      gd_repid     LIKE sy-repid.


************************************************************************
*Start-of-selection.
START-OF-SELECTION.

  PERFORM data_retrieval.
  PERFORM set_specific_field_attributes.
  PERFORM build_fieldcatalog.
  PERFORM build_layout.
  PERFORM display_alv_report.


*&---------------------------------------------------------------------*
*&      Form  BUILD_FIELDCATALOG
*&---------------------------------------------------------------------*
*       Build Fieldcatalog for ALV Report
*----------------------------------------------------------------------*
FORM build_fieldcatalog.

  wa_fieldcat-fieldname   = 'EBELN'.
  wa_fieldcat-scrtext_m   = 'Purchase Order'.
  wa_fieldcat-col_pos     = 0.
  wa_fieldcat-outputlen   = 10.
  wa_fieldcat-emphasize   = 'X'.
  wa_fieldcat-key         = 'X'.
  APPEND wa_fieldcat TO it_fieldcat.
  CLEAR  wa_fieldcat.

  wa_fieldcat-fieldname   = 'EBELP'.
  wa_fieldcat-scrtext_m   = 'PO Item'.
  wa_fieldcat-col_pos     = 1.
  APPEND wa_fieldcat TO it_fieldcat.
  CLEAR  wa_fieldcat.

  wa_fieldcat-fieldname   = 'STATU'.
  wa_fieldcat-scrtext_m   = 'Status'.
  wa_fieldcat-col_pos     = 2.
  APPEND wa_fieldcat TO it_fieldcat.
  CLEAR  wa_fieldcat.

  wa_fieldcat-fieldname   = 'AEDAT'.
  wa_fieldcat-scrtext_m   = 'Item change date'.
  wa_fieldcat-col_pos     = 3.
  APPEND wa_fieldcat TO it_fieldcat.
  CLEAR  wa_fieldcat.

  wa_fieldcat-fieldname   = 'MATNR'.
  wa_fieldcat-scrtext_m   = 'Material Number'.
  wa_fieldcat-col_pos     = 4.
  APPEND wa_fieldcat TO it_fieldcat.
  CLEAR  wa_fieldcat.

  wa_fieldcat-fieldname   = 'MENGE'.
  wa_fieldcat-scrtext_m   = 'PO quantity'.
  wa_fieldcat-col_pos     = 5.
  APPEND wa_fieldcat TO it_fieldcat.
  CLEAR  wa_fieldcat.

  wa_fieldcat-fieldname   = 'MEINS'.
  wa_fieldcat-scrtext_m   = 'Order Unit'.
  wa_fieldcat-col_pos     = 6.
  APPEND wa_fieldcat TO it_fieldcat.
  CLEAR  wa_fieldcat.

  wa_fieldcat-fieldname   = 'NETPR'.
  wa_fieldcat-scrtext_m   = 'Net Price'.
  wa_fieldcat-edit        = 'X'. "sets whole column to be editable
  wa_fieldcat-col_pos     = 7.
  wa_fieldcat-outputlen   = 15.
  wa_fieldcat-datatype     = 'CURR'.
  APPEND wa_fieldcat TO it_fieldcat.
  CLEAR  wa_fieldcat.

  wa_fieldcat-fieldname   = 'PEINH'.
  wa_fieldcat-scrtext_m   = 'Price Unit'.
  wa_fieldcat-col_pos     = 8.
  APPEND wa_fieldcat TO it_fieldcat.
  CLEAR  wa_fieldcat.
ENDFORM.                    " BUILD_FIELDCATALOG


*&---------------------------------------------------------------------*
*&      Form  BUILD_LAYOUT
*&---------------------------------------------------------------------*
*       Build layout for ALV grid report
*----------------------------------------------------------------------*
FORM build_layout.
* Set layout field for field attributes(i.e. input/output)
  gd_layout-stylefname = 'FIELD_STYLE'.
  gd_layout-zebra             = 'X'.
ENDFORM.                    " BUILD_LAYOUT


*&---------------------------------------------------------------------*
*&      Form  DISPLAY_ALV_REPORT
*&---------------------------------------------------------------------*
*       Display report using ALV grid
*----------------------------------------------------------------------*
FORM display_alv_report.
  gd_repid = sy-repid.

*  call function 'REUSE_ALV_GRID_DISPLAY'
  CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
       EXPORTING
            i_callback_program      = gd_repid
*            i_callback_user_command = 'USER_COMMAND'
            is_layout_lvc               = gd_layout
            it_fieldcat_lvc             = it_fieldcat
            i_save                  = 'X'
       TABLES
            t_outtab                = it_ekko
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
  IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  ENDIF.
ENDFORM.                    " DISPLAY_ALV_REPORT


*&---------------------------------------------------------------------*
*&      Form  DATA_RETRIEVAL
*&---------------------------------------------------------------------*
*       Retrieve data form EKPO table and populate itab it_ekko
*----------------------------------------------------------------------*
FORM data_retrieval.
  SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
   UP TO 10 ROWS
    FROM ekpo
    INTO  CORRESPONDING FIELDS OF TABLE it_ekko.

ENDFORM.                    " DATA_RETRIEVAL


*&---------------------------------------------------------------------*
*&      Form  set_specific_field_attributes
*&---------------------------------------------------------------------*
*       populate FIELD_STYLE table with specific field attributes
*----------------------------------------------------------------------*
form set_specific_field_attributes .
  DATA ls_stylerow TYPE lvc_s_styl .
  DATA lt_styletab TYPE lvc_t_styl .

* Populate style variable (FIELD_STYLE) with style properties
*
* The NETPR field/column has been set to editable in the fieldcatalog...
* The following code sets it to be disabled(display only) if 'NETPR'
* is gt than 10.
  LOOP AT it_ekko INTO wa_ekko.
    IF wa_ekko-netpr GT 10.
      ls_stylerow-fieldname = 'NETPR' .
      ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled. 
                                             "set field to disabled
      APPEND ls_stylerow  TO wa_ekko-field_style.
      MODIFY it_ekko FROM wa_ekko.
    ENDIF.
  ENDLOOP.

endform.                    " set_specific_field_attributes

Regards

Sudheer

topic Re: ALV editing problem(+) in Application Development and Automation Discussions

ALV editing problem(+)

Re: ALV editing problem(+)

Re: ALV editing problem(+)