topic Re: SEARCH HELP in Application Development and Automation Discussions

SEARCH HELP

Former Member — Mon, 21 Aug 2006 10:28:30 GMT

I WANT TO SET SEARCH HELP RESTRICTED TO 4 VALUES..

Selection parameters for status – search help restricted to only below parameters

Make it mandatory.

I20 - hold

I30 - sucess

I40 - completed

I50 - discard.

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 10:30:26 GMT

Hi ,

Check this code


REPORT DEMO_DYNPRO_F4_HELP_MODULE.
 
TYPES: BEGIN OF VALUES,
         CARRID TYPE SPFLI-CARRID,
         CONNID TYPE SPFLI-CONNID,
       END OF VALUES.
 
DATA: CARRIER(3) TYPE C,
      CONNECTION(4) TYPE C.
 
DATA: PROGNAME LIKE SY-REPID,
      DYNNUM   LIKE SY-DYNNR,
      DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
      FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
      VALUES_TAB TYPE TABLE OF VALUES.
 
CALL SCREEN 100.
 
MODULE INIT OUTPUT.
  PROGNAME = SY-REPID.
  DYNNUM   = SY-DYNNR.
  CLEAR: FIELD_VALUE, DYNPRO_VALUES.
  FIELD_VALUE-FIELDNAME = 'CARRIER'.
  APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
 
MODULE CANCEL INPUT.
  LEAVE PROGRAM.
ENDMODULE.
 
MODULE VALUE_CARRIER INPUT.
 
  CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
            TABNAME           = 'DEMOF4HELP'
            FIELDNAME         = 'CARRIER1'
            DYNPPROG          =  PROGNAME
            DYNPNR            =  DYNNUM
            DYNPROFIELD       = 'CARRIER'.
 
ENDMODULE.
 
MODULE VALUE_CONNECTION INPUT.
 
  CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            DYNAME                   = PROGNAME
            DYNUMB                   = DYNNUM
            TRANSLATE_TO_UPPER       = 'X'
       TABLES
            DYNPFIELDS               = DYNPRO_VALUES.
 
  READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
 
  SELECT  CARRID CONNID
    FROM  SPFLI
    INTO  CORRESPONDING FIELDS OF TABLE VALUES_TAB
    WHERE CARRID = FIELD_VALUE-FIELDVALUE.
 
  CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            RETFIELD         = 'CONNID'
            DYNPPROG         = PROGNAME
            DYNPNR           = DYNNUM
            DYNPROFIELD      = 'CONNECTION'
            VALUE_ORG        = 'S'
       TABLES
            VALUE_TAB        = VALUES_TAB.
 
ENDMODULE.

Cheers

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 10:31:55 GMT

use the fm VRM_SET_VALUES.

Regards,

ravi

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 10:43:46 GMT

Hi VJ,

can u explain in detail...as i am confused with your BIG code..

Thanks in advance

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 10:46:00 GMT

Hi Ravi,

can u expalin me how to use this FM ...as it is asking ID...what to pass.....

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 10:46:31 GMT

Create a domain and put the entries into the value list.

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 10:50:09 GMT

Hi,

You need to do the following steps.

1). Define a internal table

2). Create 4 entries with the correct data

3). Pass the internal table to the FM given below

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            RETFIELD         = 'CONNID'
            DYNPPROG         = PROGNAME
            DYNPNR           = DYNNUM
            DYNPROFIELD      = 'CONNECTION'
            VALUE_ORG        = 'S'
       TABLES
            VALUE_TAB        = <YOUR INTERNAL TABLE>.

4). Call the FM where you want to display the F4 help.

Cheers

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 11:02:43 GMT

thanks..

but the values should be appeared when i click F8 and parameter value that i pass..when i click F4 on it it should display only 4 values...

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 11:11:45 GMT

Hi,

do u mean u need the F4 help from the selection screen?

If yes then you must write the above code in the selection screen event

PARAMETERS: p_matnr type matnr.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr

< CALL the FM in this event>

Hope this helps

Cheers

Re: SEARCH HELP

dani_mn — Mon, 21 Aug 2006 11:14:29 GMT

HI,

check this program it is showing 4 record in search help and all records in f8 display.

<b>REPORT ZWA_SEARCH_HELP .

data : RETURN_TAB LIKE DDSHRETVAL occurs 0 .

DATA : BEGIN OF ITAB OCCURS 0,
          BUKRS LIKE BKPF-BUKRS,
          BELNR LIKE BKPF-BELNR,
          GJAHR LIKE BKPF-GJAHR,
       END OF ITAB.

DATA : BEGIN OF ITAB1 OCCURS 0,
          BUKRS LIKE BKPF-BUKRS,
          BELNR LIKE BKPF-BELNR,
          GJAHR LIKE BKPF-GJAHR,
       END OF ITAB1.

PARAMETERS : BELNR LIKE BKPF-BELNR.

START-OF-SELECTION.

  SELECT bukrs belnr gjahr INTO TABLE itab1
    FROM bkpf.

  LOOP at itab1.

    write:/ itab1-belnr, itab1-bukrs, itab1-gjahr.

  ENDLOOP.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR BELNR.

  SELECT bukrs belnr gjahr  INTO TABLE itab
  FROM bkpf up to 4 rows  .




  CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'BELNR'
            DYNPPROG    = SY-REPID
            DYNPNR      = SY-DYNNR
            DYNPROFIELD = 'BELNR'
            VALUE_ORG   = 'S'
       TABLES
            value_tab   = ITAB
            return_tab  = return_tab.</b>

Regards,

HRA

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 11:33:14 GMT

HI HRA,

Thanks for ur help..

here i am passing the values as fixed..

I1015 Awaiting Approval

I1021 Created

I1038 Complete

I1106 Shopping cart ordered

so how to pass values...

i have declared an internal table

*DATA : BEGIN OF LT_SEARCH_HELP OCCURS 0,

VALUE1(5) TYPE C,
VALUE2(5) TYPE C,
VALUE3(5) TYPE C,
VALUE4(5) TYPE C,
END OF LT_SEARCH_HELP.

*LT_SEARCH_HELP-VALUE1 = 'I1015'.

*LT_SEARCH_HELP-VALUE2 = 'I1021'.

*LT_SEARCH_HELP-VALUE3 = 'I1038'.

*LT_SEARCH_HELP-VALUE4 = 'I1106'.

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' EXPORTING retfield = 'so_stat' DYNPPROG = SY-REPID DYNPNR = SY-DYNNR DYNPROFIELD = 'so_stat' VALUE_ORG = 'S' TABLES value_tab = lt_search_help return_tab = return_tab.

is it correct..?

Re: SEARCH HELP

dani_mn — Mon, 21 Aug 2006 11:40:58 GMT

HI VJ,

check this code, it is adding four values that you required in search help.

<b>data : RETURN_TAB LIKE DDSHRETVAL occurs 0 .

DATA : BEGIN OF LT_SEARCH_HELP OCCURS 0,
         VALUE1 like bkpf-AWTYP,
       END OF LT_SEARCH_HELP.



PARAMETERS : BELNR LIKE BKPF-BELNR.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR BELNR.


*
LT_SEARCH_HELP-VALUE1 = 'I1015'.
append lt_search_help.
LT_SEARCH_HELP-VALUE1 = 'I1021'.
append lt_search_help.
LT_SEARCH_HELP-VALUE1 = 'I1038'.
append lt_search_help.
LT_SEARCH_HELP-VALUE1 = 'I1106'.
append lt_search_help.






  CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'BELNR'
            DYNPPROG    = SY-REPID
            DYNPNR      = SY-DYNNR
            DYNPROFIELD = 'BELNR'
            VALUE_ORG   = 'S'
       TABLES
            value_tab   = LT_SEARCH_HELP
  return_tab  = return_tab.</b>

Regards,

HRA

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 11:50:27 GMT

thanks...

But when i press F4 in the selection-screen..the pop up screen is showing no values..but it is displaying 4 values found..but they are not displayed...WHY?

Re: SEARCH HELP

dani_mn — Mon, 21 Aug 2006 11:52:13 GMT

HI,

did you declare your internal table like this.


DATA : BEGIN OF LT_SEARCH_HELP OCCURS 0,
<b>         VALUE1 like bkpf-AWTYP,</b>
       END OF LT_SEARCH_HELP.

Regards,

HRA

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 13:24:28 GMT

Try with this code

REPORT ZSEARCH_HELP .

data : RETURN_TAB LIKE DDSHRETVAL occurs 0 .

DATA : BEGIN OF ITAB OCCURS 0,

VALUE LIKE BKPF-BELNR,

END OF ITAB.

PARAMETERS : BELNR LIKE BKPF-BELNR.

START-OF-SELECTION.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR BELNR.

ITAB-VALUE = '120 - hold'.

append ITAB.

ITAB-VALUE = '130 - success'.

append ITAB.

ITAB-VALUE = '140 - Completed'.

append ITAB.

ITAB-VALUE = '150- discard'.

append ITAB.

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'

EXPORTING

retfield = 'BELNR'

DYNPPROG = SY-REPID

DYNPNR = SY-DYNNR

DYNPROFIELD = 'BELNR'

VALUE_ORG = 'S'

TABLES

value_tab = ITAB

return_tab = return_tab.

Thanks

Raj

Re: SEARCH HELP

Former Member — Mon, 21 Aug 2006 13:34:22 GMT

HI,

BELOW CODE WHEN PRESSED F4 IN THE SELECTION-SCREEN IS DISPLAYING ON THE VALUES BUT NOT THE DESCRIPTION....

KINDLY SUGGEST

AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_stat.

DATA : BEGIN OF LT_SEARCH_HELP OCCURS 0,

value1 like tj02-istat,

desc(30) type c,

END OF LT_SEARCH_HELP.

LT_SEARCH_HELP-VALUE1 = 'I1015'.

LT_SEARCH_HELP-DESC = 'Awaiting Approval'.

append LT_SEARCH_HELP.

LT_SEARCH_HELP-VALUE1 = 'I1021'.

LT_SEARCH_HELP-DESC = 'Created'.

append LT_SEARCH_HELP.

LT_SEARCH_HELP-VALUE1 = 'I1038'.

LT_SEARCH_HELP-DESC = 'Complete'.

append LT_SEARCH_HELP.

LT_SEARCH_HELP-VALUE1 = 'I1106'.

LT_SEARCH_HELP-DESC = 'Shopping cart ordered'.

append LT_SEARCH_HELP.

CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'

EXPORTING

retfield = 'p_stat'

DYNPPROG = SY-REPID

DYNPNR = SY-DYNNR

DYNPROFIELD = 'p_stat'

VALUE_ORG = 'S'

TABLES

value_tab = LT_SEARCH_HELP

return_tab = return_tab.

Message was edited by: vj bb

Re: SEARCH HELP

dani_mn — Tue, 22 Aug 2006 10:25:43 GMT

HI,

declare your internal table like this.

DATA : BEGIN OF LT_SEARCH_HELP OCCURS 0,

value1 like tj02-istat,

<b>desc type char30</b>,

END OF LT_SEARCH_HELP.

Regards.