topic file opening error-smartform pdf in Application Development and Automation Discussions

file opening error-smartform pdf

Former Member — Fri, 07 Jul 2006 10:33:44 GMT

dear friends ,

i created a smartform and converted the smart form into pdf file and downloaded the same but when im trying to open the file a pop-up is coming with the msg like the file is corrupted or damaged. can any one help me on this issue. for ur convineince im putting the code also..

DATA : I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,

I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,

I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,

I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,

I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,

I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,

I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,

I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,

PDF LIKE TLINE OCCURS 0 WITH HEADER LINE,

Work Area declarations

WA_OBJHEAD TYPE SOLI_TAB,

W_CTRLOP TYPE SSFCTRLOP,

W_COMPOP TYPE SSFCOMPOP,

W_RETURN TYPE SSFCRESCL,

WA_DOC_CHNG TYPE SODOCCHGI1,

W_DATA TYPE SODOCCHGI1,

WA_BUFFER TYPE STRING,"To convert from 132 to 255

V_FORM_NAME TYPE RS38L_FNAM,

V_LEN_IN LIKE SOOD-OBJDBLEN,

V_LEN_OUT LIKE SOOD-OBJLEN,

V_LEN_OUTN TYPE I,

V_LINES_TXT TYPE I,

V_LINES_BIN TYPE I.

CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'

EXPORTING

FORMNAME = 'ZRD_PINU'"give ur smartform name

IMPORTING

FM_NAME = V_FORM_NAME

EXCEPTIONS

NO_FORM = 1

NO_FUNCTION_MODULE = 2

OTHERS = 3.

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

W_CTRLOP-GETOTF = 'X'.

W_CTRLOP-NO_DIALOG = 'X'.

W_COMPOP-TDNOPREV = 'X'.

CALL FUNCTION V_FORM_NAME

EXPORTING

CONTROL_PARAMETERS = W_CTRLOP

OUTPUT_OPTIONS = W_COMPOP

USER_SETTINGS = 'X'

IMPORTING

JOB_OUTPUT_INFO = W_RETURN

EXCEPTIONS

FORMATTING_ERROR = 1

INTERNAL_ERROR = 2

SEND_ERROR = 3

USER_CANCELED = 4

OTHERS = 5.

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

I_OTF[] = W_RETURN-OTFDATA[].

CALL FUNCTION 'CONVERT_OTF'

EXPORTING

FORMAT = 'PDF'

MAX_LINEWIDTH = 132

IMPORTING

BIN_FILESIZE = V_LEN_IN

TABLES

OTF = W_RETURN-OTFDATA

LINES = I_TLINE

EXCEPTIONS

ERR_MAX_LINEWIDTH = 1

ERR_FORMAT = 2

ERR_CONV_NOT_POSSIBLE = 3

OTHERS = 4.

Fehlerhandling

IF SY-SUBRC <> 0.

ENDIF.

CALL FUNCTION 'GUI_DOWNLOAD'

EXPORTING

BIN_FILESIZE =

FILENAME = 'c:\ktsf.pdf'

FILETYPE = 'ASC'

APPEND = ' '
WRITE_FIELD_SEPARATOR = ''
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
IMPORTING
FILELENGTH =

TABLES

DATA_TAB = I_TLINE

EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

Thanks in advance.

Regards..

DurgaPrasad.K

Re: file opening error-smartform pdf

Former Member — Fri, 07 Jul 2006 10:36:28 GMT

Hi durgaprasad,

1. Thats bcos .PDF file is a binary file,

and not a text file.

2. Hence, pass the parameter in GUI_DOWNLOAD

FILETYPE = 'BIN'

(and not FILETYPE = 'ASC')

regards,

amit m.

Re: file opening error-smartform pdf

Former Member — Fri, 07 Jul 2006 10:41:02 GMT

DEAR AMIT,

I even tried that but the result is the error message says the file is not supported.it also says is not properly decoded.

regards

DurgaPrasad.k

Re: file opening error-smartform pdf

Former Member — Fri, 07 Jul 2006 10:41:54 GMT

hi,

since it is pdf file. you have to use BIN

CALL FUNCTION 'GUI_DOWNLOAD'

EXPORTING

BIN_FILESIZE =

FILENAME = 'c:\ktsf.pdf'

FILETYPE = 'BIN'

APPEND = ' '
WRITE_FIELD_SEPARATOR = ''
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
IMPORTING
FILELENGTH =

TABLES

DATA_TAB = I_TLINE

EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

REGARDS

vijay

Re: file opening error-smartform pdf

Former Member — Fri, 07 Jul 2006 10:45:03 GMT

Hi Durgaprasad,

You can go through this code sample.. This is to combine multiple smartform output to one PDF... You can use it to achieve your result...

http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/62ae7fcd-0b01-0010-3e9d-a54f26944450

Close the thread once the problem is resolved.

Regards,

SP.

Re: file opening error-smartform pdf

Former Member — Fri, 07 Jul 2006 11:04:11 GMT

Hi again,

1. I just tried at my end,

and now it works fine.

2. I have used another FM

for converting to PDF.

CONVERT_OTF_2_PDF

3. use like this

(u may change the variable name as per ur requirement)

data : myline like table of tline with header line.

data : docs like table of DOCS with header line.

CALL FUNCTION 'CONVERT_OTF_2_PDF'

EXPORTING
USE_OTF_MC_CMD = 'X'
ARCHIVE_INDEX =
IMPORTING
BIN_FILESIZE =

TABLES

OTF = otf

DOCTAB_ARCHIVE = docs

LINES = myline

EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

4. Now download internal table

MYLINE (using gui_download)

in 'BIN' Format.

5. It will work fine !

regards,

amit m.

Re: file opening error-smartform pdf

Former Member — Fri, 07 Jul 2006 13:05:53 GMT

dear amit

thanx a lot i solved the problem. actually i didnot mentio the field value

BIN_FILESIZE = V_LINES_BIN

in the gui_download fm.

this was the problem .. but thanx newaz.

cheers...

DurgaPrasad

Re: file opening error-smartform pdf

Former Member — Fri, 07 Jul 2006 13:11:27 GMT

HI again,

1. That may work.

2. But i tried the same, without specifying

the binary file size,

and it worked perfectly fine !

regards,

amit m.