topic Re: BAPI or FM for t-code IW34 in Application Development and Automation Discussions

BAPI or FM for t-code IW34

Former Member — Mon, 17 Jul 2006 03:12:13 GMT

Hi all,

i need create service order for existing service notifications (like transaction IW34). I have already used bapi BAPI_ALM_ORDER_MAINTAIN to create service order, but i dont know link or connecting the generated order with the notification.

Please let me know Is there any process to do this ??

Best Regards,

Daniel Pinto

Re: BAPI or FM for t-code IW34

Former Member — Mon, 17 Jul 2006 03:34:02 GMT

Hi Daniel,

Go through the Function Module present in the link,

http://help.sap.com/saphelp_47x200/helpdata/en/c6/893f0f449311d1893e0000e8323c4f/frameset.htm

Regards,

Azaz Ali.

Re: BAPI or FM for t-code IW34

Former Member — Mon, 17 Jul 2006 03:46:57 GMT

Hi,

The bapi is BAPI_ALM_CONF_CREATE.

Regards,

Azaz Ali.

Re: BAPI or FM for t-code IW34

Former Member — Mon, 17 Jul 2006 13:24:50 GMT

Hi Azaz,

Thanks for you reply, but i dont look bapi to order confirmation. I am looking bapi or FM to create Notification order. Please tell me if the bapi BAPI_ALM_CONF_CREATE just do it. Please, give me an example.

Best regards,

Daniel Pinto

Re: BAPI or FM for t-code IW34

ferry_lianto — Mon, 17 Jul 2006 14:24:49 GMT

Hi Daniel,

Have you looked FM IWOL_CREATE_NOTIF_FROM_ORDER?


CALL FUNCTION 'IWOL_CREATE_NOTIF_FROM_ORDER'
  EXPORTING
    I_AUFNR   = CAUFVD-AUFNR
    I_MAINTPL = 'X'
  IMPORTING
    E_QMNUM   = CAUFVD-QMNUM
  EXCEPTIONS
   OTHERS    = 0.

Regards,

Ferry Lianto

Re: BAPI or FM for t-code IW34

Former Member — Mon, 17 Jul 2006 14:47:23 GMT

Hi Ferry,

Thanks for you reply.

This FM need a order to create a notification, but I have the opposite case: I have a notification, then i need create service order for it. (like t-code IW34).

Best regards,

Daniel Pinto

Re: BAPI or FM for t-code IW34

ferry_lianto — Mon, 17 Jul 2006 18:01:35 GMT

Hi Daniel,

Please try FM CO_IH_ORDER_GENER_2.


CALL FUNCTION 'CO_IH_ORDER_GENER_2'
  EXPORTING
    AUART       = RIWO00-AUART
    GEWRK       = VIQMEL-ARBPL
    GEWRK_OBJTY = VIQMEL-CROBJTY
    VIQMEL_I    = VIQMEL
  IMPORTING
    AUFNR       = VIQMEL-AUFNR.

Hope this will help.

Regards,

Ferry Lianto

Please reward points if helpful.

Re: BAPI or FM for t-code IW34

Former Member — Tue, 05 Jun 2007 13:54:48 GMT

Hi,

I have a notification, then i need create order for it.

here i am using the below FM. i getting error INVALID_NOTIFICATION. if we are passing notification numer (QMNUM ) in the structure VIQMEL.

CALL FUNCTION 'CO_IH_ORDER_GENER_2'

EXPORTING

AUART = RIWO00-AUART

GEWRK = VIQMEL-ARBPL

GEWRK_OBJTY = VIQMEL-CROBJTY

VIQMEL_I = VIQMEL

IMPORTING

AUFNR = VIQMEL-AUFNR.

Please let me know Is there any process to do this ??

Re: BAPI or FM for t-code IW34

Former Member — Fri, 05 Nov 2010 07:27:24 GMT

Hi All,

I got the same problem here. But the FM CO_IH_ORDER_GENER_2 is used to create an order including the notification. I have the case where i have create a notification and then I want to convert it to an order. Any suggestion for the FM or BAPI? Or is it using BDC programming is the only option?

Thanks,

Gilang

Re: BAPI or FM for t-code IW34

former_member321510 — Tue, 29 Dec 2015 10:22:24 GMT

This is realy good one

[Solved]&nbsp;BAPI to create service order through notification

And remember it is important that in lt_methods line with save were at the end.

This is my code

APPEND INITIAL LINE TO lt_methods ASSIGNING <ls_methods>.
     <ls_methods>-refnumber = '000001'.
     <ls_methods>-objecttype = zcl_tm1_constants=>cs_order_methods-objecttype-oper.
     <ls_methods>-method     = zcl_tm1_constants=>cs_order_methods-method-create.
     <ls_methods>-objectkey = lv_aufnr.

     APPEND INITIAL LINE TO lt_methods ASSIGNING <ls_methods>.
     <ls_methods>-refnumber = '000001'.
     <ls_methods>-objecttype = zcl_tm1_constants=>cs_order_methods-objecttype-head.
     <ls_methods>-method     = zcl_tm1_constants=>cs_order_methods-objecttype-notif.
     CONCATENATE lv_aufnr iv_notif_no INTO <ls_methods>-objectkey .

     APPEND INITIAL LINE TO lt_methods ASSIGNING <ls_methods> .
     <ls_methods>-refnumber = '000001'.
     <ls_methods>-method     = zcl_tm1_constants=>cs_order_methods-method-save.
     <ls_methods>-objectkey = lv_aufnr.

     "header
     APPEND INITIAL LINE TO lt_maint_header ASSIGNING FIELD-SYMBOL(<ls_maint_header>).
     <ls_maint_header>-order_type = iv_order_type.
     <ls_maint_header>-start_date = lv_beg_date.
     <ls_maint_header>-finish_date = lv_fin_date.
     <ls_maint_header>-basicstart = iv_beg_time.
     <ls_maint_header>-basic_fin   = iv_fin_time.
     <ls_maint_header>-mn_wk_ctr   = iv_main_work_center.
     <ls_maint_header>-plant       = iv_main_work.
     <ls_maint_header>-planplant   = iv_planning_plant.
     <ls_maint_header>-notif_no    = iv_notif_no.
     <ls_maint_header>-notif_type = iv_notif_type.

     "operations
     APPEND INITIAL LINE TO lt_operation ASSIGNING FIELD-SYMBOL(<ls_operations>).
     <ls_operations>-control_key = iv_control_key.
     <ls_operations>-number_of_capacities = iv_no_of_cap.
     <ls_operations>-un_work = iv_unit_of_work.
     <ls_operations>-duration_normal_unit = iv_normal_duration.
     <ls_operations>-work_activity = iv_work_involved.
     <ls_operations>-description = iv_operation_txt.
     <ls_operations>-activity    = '0010'.

CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
       TABLES
         it_methods   = lt_methods   " BAPI structure: Processing methods
         it_header    = lt_maint_header
*       it_component = lt_component
         it_operation = lt_operation
         return       = lt_return
         et_numbers   = et_numbers.   " Return Parameter(s)

Re: BAPI or FM for t-code IW34

mjchiappe — Tue, 26 Oct 2021 16:45:11 GMT

Hello, sorry for bring back this old post, but i hope this helps somebody with the same issue...

BAPI_ALM_ORDER_MAINTAIN will do the job.

The creation of a PM order linked to a notification is really simple, if you know the commands to populate

IT_METHODS.

To do this, you must use the "new object code" %00000000001 followed by the notification number but populating all the 12 characters:

In my case the notification number is 10000786.

Don't forget the SAVE method.

Next you need to populate the header, and at least one operation, remember to include the %00000000001 in the

ORDER_ID field. (IT_HEADER)

Also put the notification number in the

NOTIF_NO field, but this time without the left zeroes. (10000786 in my case)

Next i used the following sequence to doit all in SE37:

"X" to Commit and "X" to DEQUEQUE_ALL.
That will do the job.

Result:

Hope it helps to someone.

Sorry for my bad english

Cheers!