topic Re: Enhancement in Application Development and Automation Discussions

Enhancement

Former Member — Thu, 15 Jun 2006 07:51:50 GMT

Hi All,

Requirement is to add couple of fields in Standard transaction.

Please let me know the steps of finding the Exit and development steps.

Thanks in advance.

Ravi

Re: Enhancement

dani_mn — Thu, 15 Jun 2006 07:59:15 GMT

goto SMOD and you can find exits there.

for implementation go to .

http://www.sappoint.com/abap.html

www.sapbrain.com

Regards,

WAsim Ahmed

Re: Enhancement

Former Member — Thu, 15 Jun 2006 08:00:14 GMT

Finding the user-exits of a SAP transaction code

Finding the user-exits of a SAP transaction code

Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.

Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com

report zuserexit no standard page heading.

tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.

tables : tstct.

data : jtab like tadir occurs 0 with header line.

data : field1(30).

data : v_devclass like tadir-devclass.

parameters : p_tcode like tstc-tcode obligatory.

select single * from tstc where tcode eq p_tcode.

if sy-subrc eq 0.

select single * from tadir where pgmid = 'R3TR'

and object = 'PROG'

and obj_name = tstc-pgmna.

move : tadir-devclass to v_devclass.

if sy-subrc ne 0.

select single * from trdir where name = tstc-pgmna.

if trdir-subc eq 'F'.

select single * from tfdir where pname = tstc-pgmna.

select single * from enlfdir where funcname =

tfdir-funcname.

select single * from tadir where pgmid = 'R3TR'

and object = 'FUGR'

and obj_name eq enlfdir-area.

move : tadir-devclass to v_devclass.

endif.

select * from tadir into table jtab

where pgmid = 'R3TR'

and object = 'SMOD'

and devclass = v_devclass.

select single * from tstct where sprsl eq sy-langu and

tcode eq p_tcode.

format color col_positive intensified off.

write:/(19) 'Transaction Code - ',

20(20) p_tcode,

45(50) tstct-ttext.

skip.

if not jtab[] is initial.

write:/(95) sy-uline.

format color col_heading intensified on.

write:/1 sy-vline,

2 'Exit Name',

21 sy-vline ,

22 'Description',

95 sy-vline.

write:/(95) sy-uline.

loop at jtab.

select single * from modsapt

where sprsl = sy-langu and

name = jtab-obj_name.

format color col_normal intensified off.

write:/1 sy-vline,

2 jtab-obj_name hotspot on,

21 sy-vline ,

22 modsapt-modtext,

95 sy-vline.

endloop.

write:/(95) sy-uline.

describe table jtab.

skip.

format color col_total intensified on.

write:/ 'No of Exits:' , sy-tfill.

else.

format color col_negative intensified on.

write:/(95) 'No User Exit exists'.

endif.

else.

format color col_negative intensified on.

write:/(95) 'Transaction Code Does Not Exist'.

endif.

at line-selection.

get cursor field field1.

check field1(4) eq 'JTAB'.

set parameter id 'MON' field sy-lisel+1(10).

call transaction 'SMOD' and skip first screen.

*---End of Program

Re: Enhancement

venkat_o — Thu, 15 Jun 2006 08:00:16 GMT

Hi Ravi,

If u give ur mail Id .I will send material Enhancements

<b>Thanks,

Venkat.O</b>

Re: Enhancement

Former Member — Thu, 15 Jun 2006 08:00:45 GMT

1. execute the tcode

2. in the intial screen go thru the menu system->status

3. there you can find the program name

4. copy to clipboard

5. execute tcode se84

6. go thru the tree enhancements->customer exits->enhancements

6a. double click on this

7. in the selection screen press shift+f9

8. in component name type/paste like this programname

9. press f8

10. here we will find the exits available.

Re: Enhancement

Former Member — Thu, 15 Jun 2006 08:11:15 GMT

Hai Ravi

Iam Sending Step By Step Creation of Field Exist

Step by step procedure for creating Field Exits

There are eight steps to creating a field exit:

Step 1: Determine Data Element

Step 2: Go To Field Exit Transaction

Step 3: Create Field Exit

Step 4: Create Function Module

Step 5: Code Function Module

Step 6: Activate Function Module

Step 7: Assign Program/Screen

Step 8: Activate Field Exit

Step 1: Determine Data Element

- Before you can begin adding the functionality for a field exit, you must know the corresponding data element.

- An easy way to determine the data element associated to a particular screen field is to:

Go the appropriate screen.

Position the cursor in the appropriate field.

Press ‘F1’ for field-level help.

Click on the ‘Technical info’ pushbutton (or press ‘F9’) on the help dialog box.

On this Technical Information dialog box, the data element will be specified if the field is 'painted' from the ABAP/4 Dictionary.

Step 2: Go To Field Exit Transaction

- The transaction to create field exits is CMOD.

- You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.

- From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.

- After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.

NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.

Step 3: Create Field Exit

- From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.

- After choosing this menu path, a dialog box will prompt you for the appropriate data element .

- Enter the data element name and click the ‘Continue’ pushbutton.

- Now, you will be able to create the function module associated to the data element’s field exit.

Step 4: Create Function Module

- You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the ‘Continue’ pushbutton.

- In the ‘Function module’ field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:

FIELD_EXIT_<data element>

- You can add an identifier (an underscore followed by a single character ).

- The first function module for a data element’s field exit must be created without an identifier.

- To create the function module, click on the ‘Create’ pushbutton, choose menu path Function module -> Create, or press ‘F5’.

- After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing ‘Enter’, you will be able to go ahead and create the function module.

- Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.

Step 5: Code Function Module

- From the function module’s attributes screen, click on the ‘Source code’ pushbutton or choose the Goto -> Function module menu path to the code of the function module.

- Here you will add your desired functionality for the field exit.

- Remember that field exit’s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.

- You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.

Step 6: Activate Function Module

- After coding the function module, you must remember to activate it.

- Use the Function module -> Activate menu path to activate the function module.

- At this point, you can return to the field exit transaction.

- You should be able to 'green arrow' back to this transaction.

- When you return to the field exit transaction, you will see an entry for the newly created field exit.

- At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.

- Also, the field exit will not be triggered yet because it is inactive.

Step 7: Assign Program/Screen

- This step is only needed if you want to make a field exit local.

- To make a field exit local, select the field exit and click on the ‘Assign prog./screen’ pushbutton.

- In the dialog box , indicate the appropriate program name and screen number.

This information indicates that the field exit is local to the specified screen in the specified program.

- In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the ‘Fld. Exit’ field.

- If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.

- If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.

Step 8: Activate Field Exit

- The field exit must be active for it to be triggered by the system.

- Activate the field exit by choosing the Field exit -> Activate menu path.

- After assigning the field exit to a change request, its status will change to ‘Active’ and it will be triggered automatically on the appropriate screen(s).

NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers

Thanks & regards

Sreenivasulu P

Re: Enhancement

Former Member — Thu, 15 Jun 2006 08:30:50 GMT

Hi Ravi,

THE USER EXITS FOR ANY TRANSACTIONS CAN ALSO BE OBTAINED USING THE PROGRAM GIVEN IN THE LINK

http://www.sap-img.com/ab038.htm

You can find all the relevant User-exits with documentataion through transaction SPRO-> SAP Reference IMG.

Navigate through the following path

Sales and Distribution -> System Modifications -> User Exits.

MV45AFZZ, MV45AFZB are some of the most commonly used.

Reward points if helpful,

Rgds,

Sumana

Re: Enhancement

Former Member — Sun, 21 Oct 2007 15:34:55 GMT

ravindranathbandi@gmail.com

is my mail id .

please send it