topic Submit with selection table seltab in Application Development and Automation Discussions

topic Submit with selection table seltab in Application Development and Automation Discussions https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434743#M207410 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>data :SELTAB TYPE TABLE OF RSPARAMS.</P><P></P><P>Im using </P><P>submit zprog using selection-table seltab.</P><P></P><P>But My selection screen of zprog is still visible and </P><P>im able to change the values of the 'zprog'.</P><P>Is it possible to skip the entire selection screen and just pass value from the program where i use submit zprog.</P><P></P><P>My requirement is i should be able to edit values of the calling program 'zprog'. How we do i do this?</P><P>The above submit statement doesnt work.</P><P></P><P></P><P>Thanks,</P><P>Anita</P></BODY></HTML> Fri, 14 Jul 2006 20:19:40 GMT Former Member 2006-07-14T20:19:40Z Submit with selection table seltab https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434743#M207410 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>data :SELTAB TYPE TABLE OF RSPARAMS.</P><P></P><P>Im using </P><P>submit zprog using selection-table seltab.</P><P></P><P>But My selection screen of zprog is still visible and </P><P>im able to change the values of the 'zprog'.</P><P>Is it possible to skip the entire selection screen and just pass value from the program where i use submit zprog.</P><P></P><P>My requirement is i should be able to edit values of the calling program 'zprog'. How we do i do this?</P><P>The above submit statement doesnt work.</P><P></P><P></P><P>Thanks,</P><P>Anita</P></BODY></HTML> Fri, 14 Jul 2006 20:19:40 GMT https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434743#M207410 Former Member 2006-07-14T20:19:40Z Re: Submit with selection table seltab https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434744#M207411 <HTML><HEAD></HEAD><BODY><P>Yes, just get rid of the VIA SELECTION-SCREEN part of the SUBMIT statement. I assume that you are using this.</P><P></P><P>Regards,</P><P>Rich Heilman</P></BODY></HTML> Fri, 14 Jul 2006 20:21:18 GMT https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434744#M207411 RichHeilman 2006-07-14T20:21:18Z Re: Submit with selection table seltab https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434745#M207412 <HTML><HEAD></HEAD><BODY><P>Im not using VIA SELECTION-SCREEN part of the SUBMIT statement. But still my selection screen is called and im able to edit the calling program's selection screen values.</P><P></P><P>Regards,</P><P>Anita</P></BODY></HTML> Fri, 14 Jul 2006 20:23:32 GMT https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434745#M207412 Former Member 2006-07-14T20:23:32Z Re: Submit with selection table seltab https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434746#M207413 <HTML><HEAD></HEAD><BODY><P>See this sample program. Notice the commented out VIA SELECTION-SCREEN. If you run this, it will go directly to the list output.</P><P></P><PRE><CODE> report zrich_0002 . data: iSEL TYPE TABLE OF RSPARAMS. data: xsel type rsparams. xsel-SELNAME = 'MATNR'. xsel-KIND = 'S'. xsel-SIGN = 'I'. xsel-OPTION = 'EQ'. xsel-LOW = '000000000040000692'. append xsel to isel. xsel-SELNAME = 'MATNR'. xsel-KIND = 'S'. xsel-SIGN = 'I'. xsel-OPTION = 'EQ'. xsel-LOW = '000000000040000693'. append xsel to isel. xsel-SELNAME = 'WERKS'. xsel-KIND = 'S'. xsel-SIGN = 'I'. xsel-OPTION = 'EQ'. xsel-LOW = '0008'. append xsel to isel. xsel-SELNAME = 'BUDAT'. xsel-KIND = 'S'. xsel-SIGN = 'I'. xsel-OPTION = 'EQ'. xsel-LOW = sy-datum. append xsel to isel. submit RM07DOCS * via selection-screen with selection-table isel and return. </CODE></PRE><P></P><P>Regards,</P><P>Rich Heilman</P></BODY></HTML> Fri, 14 Jul 2006 20:26:50 GMT https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434746#M207413 RichHeilman 2006-07-14T20:26:50Z Re: Submit with selection table seltab https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434747#M207414 <HTML><HEAD></HEAD><BODY><P>can you post the code?</P><P></P><P>Regards,</P><P>Rich Heilman</P></BODY></HTML> Fri, 14 Jul 2006 20:27:42 GMT https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434747#M207414 RichHeilman 2006-07-14T20:27:42Z Re: Submit with selection table seltab https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434748#M207415 <HTML><HEAD></HEAD><BODY><P>DATA: SELTAB TYPE TABLE OF RSPARAMS,</P><P> SELTAB_WA LIKE LINE OF SELTAB.</P><P></P><P></P><P></P><P> MOVE: 'RLDNR' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> 'Y8' TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P> MOVE: 'RRCTY' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_RRCTY TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P></P><P> MOVE: 'RVERS' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> '002' TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P></P><P> MOVE: 'RCOMP' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_RCOMP TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P> MOVE: 'LOGSYS' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_LOGSYS TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P></P><P> MOVE: 'RYEAR' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_RYEAR TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P> MOVE: 'POPER' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_POPER TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P> MOVE: 'RACCT' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_RACCT TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P></P><P> MOVE: 'TT' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_TT TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P> MOVE: 'SI' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_SI TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P> MOVE: 'PSI' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_PSI TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P> MOVE: 'TEST' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_TEST TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P> MOVE: 'LISTE' TO SELTAB_WA-SELNAME,</P><P> 'P' TO SELTAB_WA-KIND, " PARAMETER</P><P> 'EQ' TO SELTAB_WA-OPTION,</P><P> P_LISTE TO SELTAB_WA-LOW.</P><P> APPEND SELTAB_WA TO SELTAB.</P><P></P><P></P><P> SUBMIT RGUDEL00 WITH SELECTION-TABLE SELTAB and</P><P> return.</P><P></P><P> IF SY-SUBRC EQ 0.</P><UL><LI level="1" type="ul"><P>Message S047 - PROGRAM EXECUTED SUCCESSFULLY!!</P></LI></UL><P> MESSAGE S047(ZMSG).</P><P></P><P>Regards,</P><P>Anita</P><P> ENDIF.</P></BODY></HTML> Fri, 14 Jul 2006 22:05:35 GMT https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434748#M207415 Former Member 2006-07-14T22:05:35Z Re: Submit with selection table seltab https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434749#M207416 <HTML><HEAD></HEAD><BODY><P>I have tested your program. I'm assuming that its not executing because its waiting for values. In my system(46c) the parameters are not named as you have here. For example, notice the values in BOLD. These are the parameter names is the SUBMITed program. You must specify the correct names of the fields in order for them to be passed correctly.</P><P></P><PRE><CODE>MOVE: <b>'P_RLDNR'</b> TO SELTAB_WA-SELNAME, 'P' TO SELTAB_WA-KIND, " PARAMETER 'EQ' TO SELTAB_WA-OPTION, 'Y8' TO SELTAB_WA-LOW. APPEND SELTAB_WA TO SELTAB. MOVE: <b>'P_RRCTY'</b> TO SELTAB_WA-SELNAME, 'P' TO SELTAB_WA-KIND, " PARAMETER 'EQ' TO SELTAB_WA-OPTION, P_RRCTY TO SELTAB_WA-LOW. APPEND SELTAB_WA TO SELTAB.</CODE></PRE><P></P><P></P><P>Also, in my system it is stopping at a warning message on the selection screen. You may not be able to get around this.</P><P></P><P>Regards,</P><P>Rich Heilman</P></BODY></HTML> Sat, 15 Jul 2006 01:07:20 GMT https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434749#M207416 RichHeilman 2006-07-15T01:07:20Z Re: Submit with selection table seltab https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434750#M207417 <HTML><HEAD></HEAD><BODY><P>Hi Rich,</P><P></P><P>Thank you. I just have to make sure i pass the correct names and the usage of No-Extensions and No-intervals for the same parameter were confusing me a bit, as to how to pass values to the calling progam. Im with 4.6C only and now it works for me. </P><P></P><P>My Learning goes below:-</P><P>Values are seen only after INITIALIZATION and if there are any default values in the submitted program , those are over written with values from the program where we use submit program.</P><P></P><P>Thanks,</P><P>Anita</P></BODY></HTML> Mon, 17 Jul 2006 14:33:18 GMT https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434750#M207417 Former Member 2006-07-17T14:33:18Z Re: Submit with selection table seltab https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434751#M207418 <HTML><HEAD></HEAD><BODY><P>Hi Anitha Babu,</P><P></P><P>Please try the code below:</P><P>wa_rsparams<SPAN class="L0S70">-</SPAN>selname <SPAN class="L0S55">= </SPAN><SPAN class="L0S33">'S_ZDAT'</SPAN><SPAN class="L0S55">.</SPAN></P><P>   wa_rsparams<SPAN class="L0S70">-</SPAN>kind    <SPAN class="L0S55">= </SPAN><SPAN class="L0S33">'S'</SPAN><SPAN class="L0S55">.</SPAN></P><P>   wa_rsparams<SPAN class="L0S70">-</SPAN><SPAN class="L0S52">sign    </SPAN><SPAN class="L0S55">= </SPAN><SPAN class="L0S33">'I'</SPAN><SPAN class="L0S55">.</SPAN></P><P>   wa_rsparams<SPAN class="L0S70">-</SPAN>option  <SPAN class="L0S55">= </SPAN><SPAN class="L0S33">'BT'</SPAN><SPAN class="L0S55">.</SPAN></P><P>   wa_rsparams<SPAN class="L0S70">-</SPAN>low     <SPAN class="L0S55">= </SPAN>s_zdat<SPAN class="L0S70">-</SPAN>low<SPAN class="L0S55">.</SPAN></P><P>   wa_rsparams<SPAN class="L0S70">-</SPAN>high    <SPAN class="L0S55">= </SPAN>s_zdat<SPAN class="L0S70">-</SPAN>high<SPAN class="L0S55">.</SPAN></P><P>   <SPAN class="L0S52">APPEND </SPAN>wa_rsparams <SPAN class="L0S52">TO </SPAN>gt_rsparams<SPAN class="L0S55">.</SPAN></P><P>   <SPAN class="L0S52">CLEAR </SPAN>wa_rsparams<SPAN class="L0S55">.</SPAN></P><P></P><P>   <SPAN class="L0S52">SUBMIT <Report_Name> </SPAN><SPAN class="L0S52">WITH </SPAN>s_entcod <SPAN class="L0S55">= </SPAN>s_entcod</P><P>                       <SPAN class="L0S52">WITH </SPAN>s_relate <SPAN class="L0S55">= </SPAN>s_relate</P><P>                       <SPAN class="L0S52">WITH </SPAN>r_entity <SPAN class="L0S55">= </SPAN><SPAN class="L0S33">'X'</SPAN></P><P>                       <SPAN class="L0S52">WITH </SPAN><SPAN class="L0S52">SELECTION-TABLE </SPAN>gt_rsparams</P><P>                       <SPAN class="L0S52">AND </SPAN><SPAN class="L0S52">RETURN</SPAN><SPAN class="L0S55">.</SPAN></P></BODY></HTML> Mon, 03 Nov 2014 11:18:31 GMT https://community.sap.com/t5/application-development-and-automation-discussions/submit-with-selection-table-seltab/m-p/1434751#M207418 Former Member 2014-11-03T11:18:31Z