topic Re: USER-EXITS in Application Development and Automation Discussions

USER-EXITS

Former Member — Thu, 15 Jun 2006 05:38:15 GMT

HI,

can any body tell me how to find out user exit and BAdI for particular transaction..

advance thanks.

Re: USER-EXITS

Former Member — Thu, 15 Jun 2006 05:40:04 GMT

Hi,

You can find user exits through Tcode SMOD and CMOD.

Regards,

Ram Mohan

Re: USER-EXITS

Former Member — Thu, 15 Jun 2006 05:40:09 GMT

for badi..

1)find the transaction package and go to SE18

from there use F4 ,

2) and click on information system

3)and provide the package name there.

4)it will list the available BADI's for that trxn.

for example va01 package is VA

give it and find the BADI's related .

Check out this link. Hope this helps.

for user exit...

Finding the user-exits of a SAP transaction code

Finding the user-exits of a SAP transaction code

Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.

Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com

report zuserexit no standard page heading.

tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.

tables : tstct.

data : jtab like tadir occurs 0 with header line.

data : field1(30).

data : v_devclass like tadir-devclass.

parameters : p_tcode like tstc-tcode obligatory.

select single * from tstc where tcode eq p_tcode.

if sy-subrc eq 0.

select single * from tadir where pgmid = 'R3TR'

and object = 'PROG'

and obj_name = tstc-pgmna.

move : tadir-devclass to v_devclass.

if sy-subrc ne 0.

select single * from trdir where name = tstc-pgmna.

if trdir-subc eq 'F'.

select single * from tfdir where pname = tstc-pgmna.

select single * from enlfdir where funcname =

tfdir-funcname.

select single * from tadir where pgmid = 'R3TR'

and object = 'FUGR'

and obj_name eq enlfdir-area.

move : tadir-devclass to v_devclass.

endif.

select * from tadir into table jtab

where pgmid = 'R3TR'

and object = 'SMOD'

and devclass = v_devclass.

select single * from tstct where sprsl eq sy-langu and

tcode eq p_tcode.

format color col_positive intensified off.

write:/(19) 'Transaction Code - ',

20(20) p_tcode,

45(50) tstct-ttext.

skip.

if not jtab[] is initial.

write:/(95) sy-uline.

format color col_heading intensified on.

write:/1 sy-vline,

2 'Exit Name',

21 sy-vline ,

22 'Description',

95 sy-vline.

write:/(95) sy-uline.

loop at jtab.

select single * from modsapt

where sprsl = sy-langu and

name = jtab-obj_name.

format color col_normal intensified off.

write:/1 sy-vline,

2 jtab-obj_name hotspot on,

21 sy-vline ,

22 modsapt-modtext,

95 sy-vline.

endloop.

write:/(95) sy-uline.

describe table jtab.

skip.

format color col_total intensified on.

write:/ 'No of Exits:' , sy-tfill.

else.

format color col_negative intensified on.

write:/(95) 'No User Exit exists'.

endif.

else.

format color col_negative intensified on.

write:/(95) 'Transaction Code Does Not Exist'.

endif.

at line-selection.

get cursor field field1.

check field1(4) eq 'JTAB'.

set parameter id 'MON' field sy-lisel+1(10).

call transaction 'SMOD' and skip first screen.

*---End of Program

Re: USER-EXITS

Former Member — Thu, 15 Jun 2006 05:42:10 GMT

Hi Raghuveer,

Type the transaction : system->status-> <PROG. NAME>

2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.

3. Open CMOD utilities->SAP enhancements

EDIT->All selections

4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.

5. The displayed list contains the enhancements names for the transaction You were looking for.

6. Create a project in CMOD and the code in default include->activate.

Rgds,

Prakashsingh

Re: USER-EXITS

Former Member — Thu, 15 Jun 2006 05:43:22 GMT

Hi Raghuveer,

i think this info is useful for u

1. Type the transaction : system->status-> <PROG. NAME>

2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.

3. Open CMOD utilities->SAP enhancements

EDIT->All selections

4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.

5. The displayed list contains the enhancements names for the transaction You were looking for.

6. Create a project in CMOD and the code in default include->activate.

For Badi Go to SE18 in the Implementation name write BADI_TRANSACTIONNAME search on this you will get all the BADI's related to the transaction

Re: USER-EXITS

Former Member — Thu, 15 Jun 2006 05:45:21 GMT

Hi,

Check below a tutorial for user exits

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

following will help you to find a user exit of a particular transation.

http://www.sap-img.com/ab038.htm

Also check the foll.

http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm

Please reward for the same.

Re: USER-EXITS

venkat_o — Thu, 15 Jun 2006 05:48:07 GMT

Hi Raghuveer,

1.

Go to SE93 and give ur T.Code=>display=>Get the Package

2.

go to SE80=>palce ur PAckage here under PAckage=>Enter

Check for Enhancements or BADI in the navigation Tree.

3.

And also u can get using T.code SE18 by searching through proper Application area

I hope it helps u .

Thanks.

Venkat.O

Re: USER-EXITS

venkat_o — Thu, 15 Jun 2006 05:53:30 GMT

Hi Raghuveer,

1.

There is one Custome program for finding USer Exit for T.code .

2.

Code for program .

&----

*& Report Y_USER_EXIT *

*& *

&----

*& *

&----

report Y_USER_EXIT no standard page heading.

tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.

tables : tstct.

data : jtab like tadir occurs 0 with header line.

data : field1(30).

data : v_devclass like tadir-devclass.

parameters : p_tcode like tstc-tcode obligatory.

select single * from tstc where tcode eq p_tcode.

if sy-subrc eq 0.

select single * from tadir where pgmid = 'R3TR'

and object = 'PROG'

and obj_name = tstc-pgmna.

move : tadir-devclass to v_devclass.

if sy-subrc ne 0.

select single * from trdir where name = tstc-pgmna.

if trdir-subc eq 'F'.

select single * from tfdir where pname = tstc-pgmna.

select single * from enlfdir where funcname =

tfdir-funcname.

select single * from tadir where pgmid = 'R3TR'

and object = 'FUGR'

and obj_name eq enlfdir-area.

move : tadir-devclass to v_devclass.

endif.

select * from tadir into table jtab

where pgmid = 'R3TR'

and object = 'SMOD'

and devclass = v_devclass.

select single * from tstct where sprsl eq sy-langu and

tcode eq p_tcode.

format color col_positive intensified off.

write:/(19) 'Transaction Code - ',

20(20) p_tcode,

45(50) tstct-ttext.

skip.

if not jtab[] is initial.

write:/(95) sy-uline.

format color col_heading intensified on.

write:/1 sy-vline,

2 'Exit Name',

21 sy-vline ,

22 'Description',

95 sy-vline.

write:/(95) sy-uline.

loop at jtab.

select single * from modsapt

where sprsl = sy-langu and

name = jtab-obj_name.

format color col_normal intensified off.

write:/1 sy-vline,

2 jtab-obj_name hotspot on,

21 sy-vline ,

22 modsapt-modtext,

95 sy-vline.

endloop.

write:/(95) sy-uline.

describe table jtab.

skip.

format color col_total intensified on.

write:/ 'No of Exits:' , sy-tfill.

else.

format color col_negative intensified on.

write:/(95) 'No User Exit exists'.

endif.

else.

format color col_negative intensified on.

write:/(95) 'Transaction Code Does Not Exist'.

endif.

at line-selection.

get cursor field field1.

check field1(4) eq 'JTAB'.

set parameter id 'MON' field sy-lisel+1(10).

call transaction 'SMOD' and skip first screen.

*---End of Program

I think that it helps u little bit,

Thanks,

Venkat.O

Re: USER-EXITS

Former Member — Thu, 15 Jun 2006 06:02:00 GMT

Hi Raghuveer,



     
*&---------------------------------------------------------------------*
*& Report  ZUSEREXIT                                                   *
*&                                                                     *
*&---------------------------------------------------------------------*
*&                                                                     *
*&                                                                     *
*&---------------------------------------------------------------------*

REPORT zuserexit NO STANDARD PAGE HEADING.
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.

SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
  SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                   AND object = 'PROG'
                   AND obj_name = tstc-pgmna.
  MOVE : tadir-devclass TO v_devclass.
  IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
      SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
      SELECT SINGLE * FROM enlfdir WHERE funcname =
      tfdir-funcname.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                         AND object = 'FUGR'
                         AND obj_name EQ enlfdir-area.

      MOVE : tadir-devclass TO v_devclass.
    ENDIF.
  ENDIF.
  SELECT * FROM tadir INTO TABLE jtab
                WHERE pgmid = 'R3TR'
                  AND object = 'SMOD'
                  AND devclass = v_devclass.
  SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu AND
                                   tcode EQ p_tcode.
  FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
  WRITE:/(19) 'Transaction Code - ',
       20(20) p_tcode,
       45(50) tstct-ttext.
  SKIP.
  IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
           2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
      SELECT SINGLE * FROM modsapt
             WHERE sprsl = sy-langu AND
                    name = jtab-obj_name.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 sy-vline,
             2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
  ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
  ENDIF.
ELSE.
  FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
  WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.

AT LINE-SELECTION.
  GET CURSOR FIELD field1.
  CHECK field1(4) EQ 'JTAB'.
  SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
  CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.

Now run the report and enter the transaction code in which you want to find the exit.

Regs,

Venkat Ramanan

Message was edited by: Venkat Ramanan Natarajan

Re: USER-EXITS

Former Member — Thu, 15 Jun 2006 06:34:22 GMT

Hi Raghuveer,

Refer the following thread for user exits

Refer this thread for BADIs

Refer thread..

You can refer to recenlty published webblog by Alwin van de Put named How to search for BAdIs? (Trace it).

Here is the link..

/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it

Reward points if helpful,

Thanks & Regards,

Sumana