Logic header and data passing to a string

Former Member — Wed, 01 Jul 2015 14:07:52 GMT

Hi Folks,

Good Evening.

I am sending an ALV Output as excel attachment to emails using CL_BCS.

I need all your help on the below -

How to concatenate header with Item data?
In my code only one line is shown from internal table lt_sch_chlog. Header is not shown and all records from internal table are fetched
In my below code - lt_sch_chlog is the internal table. But when i get email i get only one record although it has multiple records. Please assist.

Code Snippet


data :   li_contents_text LIKE solisti1 OCCURS 10 WITH HEADER LINE,
           li_contents_bin_header TYPE string,
           li_contents_bin TYPE string,
           li_contents_line type xstring.
 data : c_tab type c value cl_abap_char_utilities=>horizontal_tab,
          c_ret type c value cl_abap_char_utilities=>cr_lf.
 
 DATA: li_contents_hex TYPE STANDARD TABLE OF solix.
          
  DATA: l_send_request  TYPE REF TO cl_bcs,         " Send request
            l_body              TYPE             bcsy_text,                " Mail body
            l_document       TYPE REF TO cl_document_bcs,   " Mail body
            l_sender            TYPE REF TO if_sender_bcs,     " Sender address
            l_recipient          TYPE REF TO if_recipient_bcs,  " Recipient
            l_size                TYPE sood-objlen,              " Size of Attachment
            l_lines                TYPE i,                        " Lines count
            l_email               TYPE ad_smtpadr,               " Email ID
            l_extension         TYPE soodk-objtp VALUE 'RAW'.  " TXT format
 
  DATA: l_mailtext  TYPE soli_tab.
 
   CONCATENATE  'Sales Dist'
                'Sales Grp'
                'ISR'
                'Soldto No'
                'Soldto Name'
                'End Cust No'
                'End Cust'
                              into li_contents_bin SEPARATED BY c_tab.
 
   LOOP AT lt_sch_chlog INTO ls_sch_chlog.
     lv_kwmeng = ls_sch_chlog-kwmeng.
     lv_open_cnfqty = ls_sch_chlog-open_cnfqty.
     lv_bmeng_old =   ls_sch_chlog-bmeng_old .
     lv_bmeng_new = ls_sch_chlog-bmeng_new .
     lv_conf_netwr =  ls_sch_chlog-conf_netwr.
 
     CONCATENATE ls_sch_chlog-zzbzirk
                 ls_sch_chlog-zzvkgrp
                 ls_sch_chlog-isr_name
                 ls_sch_chlog-sold_to_no
                 ls_sch_chlog-sold_to_name
                 ls_sch_chlog-end_cust_no
                 ls_sch_chlog-end_cust
                                                  into li_contents_bin separated by c_tab.
   ENDLOOP.


APPEND 'Please find attached Schedule Line Change Log Report.'  TO l_body.
 
 *Converting the table contents for attachment to xstring
     CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
       EXPORTING
         text           = li_contents_bin
       IMPORTING
         buffer         = li_contents_line
      EXCEPTIONS
        failed         = 1
        OTHERS         = 2.
 
 *Converting the table contents from xstring to binary
     CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
       EXPORTING
         buffer                = li_contents_line
       TABLES
         binary_tab            = li_contents_hex.
 
 * Creates persistent send request
   l_send_request = cl_bcs=>create_persistent( ).
 * Craete document for mail body
   l_document = cl_document_bcs=>create_document(
                i_type    = 'RAW'
                i_text    = l_body
 *               i_length  = '500'
                i_subject = 'Schedule Line Change Log' ).
 
 * Add attchment
   CALL METHOD l_document->add_attachment
     EXPORTING
       i_attachment_type    = 'XLS'"l_extension
       i_attachment_subject = 'Schedule Line Change Log'
       i_attachment_size    = l_size
 *     i_att_content_text   = it_attach.
       i_att_content_hex    = li_contents_hex.
 
 * Add the document to send request
   CALL METHOD l_send_request->set_document( l_document ).
 * Sender addess
   l_sender = cl_sapuser_bcs=>create( sy-uname ).
   CALL METHOD l_send_request->set_sender
     EXPORTING
       i_sender = l_sender.
 
   IF p_email[] IS NOT INITIAL.
   LOOP AT p_email.
       l_email = p_email-low.
       l_recipient = cl_cam_address_bcs=>create_internet_address( l_email ).
     ENDLOOP.
   endif.
 
 * Add recipient address to send request
   CALL METHOD l_send_request->add_recipient
     EXPORTING
       i_recipient  = l_recipient
       i_express    = 'X'
       i_copy       = ' '
       i_blind_copy = ' '
       i_no_forward = ' '.
 
 * Send mail
   TRY.
       CALL METHOD l_send_request->send( ).
     CATCH cx_send_req_bcs.
 
   ENDTRY.
   COMMIT WORK.
 
   IF sy-subrc EQ 0.
     MESSAGE 'Mail sent Successfully' TYPE 'S'.
   ENDIF.

Thanks for all your help.

Re: Logic header and data passing to a string

naimesh_patel — Wed, 01 Jul 2015 14:36:49 GMT

You are missing the Line Return addition in the String


CONCATENATE  'Sales Dist'
                'Sales Grp'
                'ISR'
                'Soldto No'
                'Soldto Name'
                'End Cust No'
                'End Cust'
                              into li_contents_bin SEPARATED BY c_tab.




CONCATENATE li_contents_bin c_ret   "<<
    into li_contents_bin.

   LOOP AT lt_sch_chlog INTO ls_sch_chlog.
     lv_kwmeng = ls_sch_chlog-kwmeng.
     lv_open_cnfqty = ls_sch_chlog-open_cnfqty.
     lv_bmeng_old =   ls_sch_chlog-bmeng_old .
     lv_bmeng_new = ls_sch_chlog-bmeng_new .
     lv_conf_netwr =  ls_sch_chlog-conf_netwr.

     CONCATENATE ls_sch_chlog-zzbzirk
                 ls_sch_chlog-zzvkgrp
                 ls_sch_chlog-isr_name
                 ls_sch_chlog-sold_to_no
                 ls_sch_chlog-sold_to_name
                 ls_sch_chlog-end_cust_no
                 ls_sch_chlog-end_cust
                                                  into li_contents_bin separated by c_tab.


CONCATENATE li_contents_bin c_ret   "<<
    into li_contents_bin.

   ENDLOOP.

Regards,

Naimesh Patel

Re: Logic header and data passing to a string

Former Member — Wed, 01 Jul 2015 16:34:59 GMT

As Naimesh suggest, missing "Carriage Return and Line Feed" Character Pair.

c_ret TYPE c VALUE cl_bcs_convert=>gc_crlf. (ur definition is also correct)

Raju.

topic Re: Logic header and data passing to a string in Application Development and Automation Discussions

Logic header and data passing to a string

Re: Logic header and data passing to a string

Re: Logic header and data passing to a string