topic Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1 in Application Development and Automation Discussions

document_not_sent exception with fm SO_DOCUMENT_SEND_API1

f_cemunal — Tue, 03 Mar 2015 10:17:53 GMT

Hello i am trying to send a pdf as an attchment and using SO_DOCUMENT_SEND_API1 for this.

but fm gives sy-subrc = 2 which is document_not_sent exception.

i searched everywhere but couldnt find th mistake.

any help would be appriciated.

here is my source code.


CALL FUNCTION 'CONVERT_OTF'
     EXPORTING
        FORMAT                      = 'PDF'
        MAX_LINEWIDTH               = 132
 *       ARCHIVE_INDEX               = ' '
 *       COPYNUMBER                  = 0
 *       ASCII_BIDI_VIS2LOG          = ' '
 *       PDF_DELETE_OTFTAB           = ' '
 *    IMPORTING
 *       BIN_FILESIZE                = lv_len
 *       BIN_FILE                    = g_binfil
     TABLES
        OTF                         = lt_otfdata
        LINES                       = lt_pdfdata
     EXCEPTIONS
        ERR_MAX_LINEWIDTH           = 1
        ERR_FORMAT                  = 2
        ERR_CONV_NOT_POSSIBLE       = 3
        ERR_BAD_OTF                 = 4
     OTHERS                         = 5.


   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.


FREE: lt_receivers, lt_packing_list,
           lt_contents_bin, lt_contents_txt.

 * Assigning the Description of the object sent in the mail
     CLEAR ls_document_data.
     ls_document_data-obj_name = 'TİTLE'.
     ls_document_data-obj_descr = 'TITLE'.
     ls_document_data-expiry_dat  = sy-datum + 10.
     ls_document_data-sensitivty = 'F'.


 *    LOOP AT gt_mail.
       CLEAR : lt_receivers.
       lt_receivers-receiver = 'cem.unal@gmail.com'.
       lt_receivers-rec_type = 'U'.
       lt_receivers-com_type = 'INT'.
       APPEND lt_receivers.
       lt_receivers-COPY = mail_bm.
       lt_receivers-rec_type = 'U'.
       lt_receivers-com_type = 'INT'.
       APPEND lt_receivers.
 *    ENDLOOP.


     CLEAR: lt_contents_txt.
     lt_contents_txt-line = 'title1,'.
     APPEND lt_contents_txt.CLEAR lt_contents_txt.
     APPEND lt_contents_txt.
     CONCATENATE 'titl2'
     ' title3.' INTO lt_contents_txt-line
     SEPARATED BY space.
     APPEND lt_contents_txt.CLEAR lt_contents_txt.
     APPEND lt_contents_txt.
     lt_contents_txt-line = 'title4'.
     APPEND lt_contents_txt.CLEAR lt_contents_txt.


     CLEAR lt_packing_list.
     lt_packing_list-transf_bin  = space.
     lt_packing_list-head_start  = 1.
     lt_packing_list-head_num    = 0.
     lt_packing_list-body_start  = 1.
     lt_packing_list-body_num    = LINES( lt_contents_txt ).
     lt_packing_list-doc_type    = 'RAW'.
     APPEND lt_packing_list. CLEAR lt_packing_list.

     ls_document_data-doc_size = LINES( lt_contents_txt ) * 255.


     CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
       EXPORTING
         line_width_src              = 134
         line_width_dst              = 255
       TABLES
         content_in                  = lt_pdfdata
         content_out                 = lt_contents_bin
       EXCEPTIONS
         err_line_width_src_too_long = 1
         err_line_width_dst_too_long = 2
         err_conv_failed             = 3
         OTHERS                      = 4.


 *Filling the details in SAPoffice: Description of Imported Object
 *Components table
     DESCRIBE TABLE lt_contents_bin LINES lv_tab_lines.
     CLEAR lt_contents_bin.
     READ TABLE lt_contents_bin INDEX lv_tab_lines.
     IF sy-subrc = 0.
       CLEAR: lt_packing_list.
       lt_packing_list-transf_bin = 'X'.
       lt_packing_list-head_start = 1.
       lt_packing_list-head_num = 1.
       lt_packing_list-body_start = 1.
       lt_packing_list-body_num = lv_tab_lines.
       lt_packing_list-obj_langu = sy-langu.
       lt_packing_list-doc_type = 'PDF'.
       lt_packing_list-obj_name = 'ATTACHMENT'.
       lt_packing_list-obj_descr = 'RISK TALEP FORMU.PDF'.
       lt_packing_list-doc_size = lv_tab_lines * 255.
       APPEND lt_packing_list.CLEAR lt_packing_list.
     ENDIF.

     lv_put_in_outbox = lv_commit_work = 'X'.

     CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
         document_data              = ls_document_data
         put_in_outbox              = lv_put_in_outbox
 *        sender_address             = lv_sender_address
 *        sender_address_type        = lv_sender_address_type
         commit_work                = lv_commit_work
       TABLES
         packing_list               = lt_packing_list
         object_header              = lt_object_header
         contents_bin               = lt_contents_bin
         contents_txt               = lt_contents_txt
 *        contents_hex               = lt_contents_hex
         object_para                = lt_object_para
         object_parb                = lt_object_parb
         receivers                  = lt_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.

     IF sy-subrc eq 0.

 *      gt_data-gonderx = 'X'.
 *      modify gt_data.
 *      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 *              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
     ENDIF.

Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1

f_cemunal — Tue, 03 Mar 2015 14:13:28 GMT

any ideas ?

Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1

Former Member — Tue, 03 Mar 2015 15:31:35 GMT

Hi,

Please see the following code which I used which is perfectly working.

Please change your lines of code for DOC_SIZE and SENSITIVITY as per BOLD lines in below code.

   DESCRIBE TABLE li_contents LINES l_lines_cnt.
    READ TABLE li_contents INTO lst_contents INDEX l_lines_cnt.

***** Step 2 - Fill the document data, specify the mail body size
** Document Data

** Subject Line in the mail
    lst_document_data-obj_name   = 'FI_AP'.
    lst_document_data-obj_descr = 'Audit Trail File'.                  " Title of Mail
    lst_document_data-sensitivty = 'F'.
    lst_document_data-doc_size   = ( l_lines_cnt - 1 ) * 255 +   strlen( lst_contents ).

*-------------- Created Text Element
    lst_object_header = ' Audit Trail File Log'. "#EC *

APPEND lst_object_header TO li_object_header.
CLEAR: lst_object_header.

I hope the line as per below code are not really required

lt_packing_list-transf_bin = 'X'.
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 1.
lt_packing_list-body_start = 1.
lt_packing_list-body_num = lv_tab_lines.

Just comment these section and make the changes as per BOLD lines above and see.

Also see if CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE' is executing without any exceptions.

Regards,

Rafi

Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1

f_cemunal — Wed, 04 Mar 2015 16:30:20 GMT

hello,

thanks for your reply.

i did what you have asked me but result hasnt changed.What might be wrong ?

CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE returns 0 as sy-subrc so no exceptions.

here is my new code :


LEAR: lt_contents_txt.
     lt_contents_txt-line = 'Sayın yetkili,'.
     APPEND lt_contents_txt.CLEAR lt_contents_txt.
     APPEND lt_contents_txt.
     CONCATENATE 'Ekte tarafınıza ait limit formu'
     ' bulunmaktadır.' INTO lt_contents_txt-line
     SEPARATED BY space.
     APPEND lt_contents_txt.CLEAR lt_contents_txt.
     APPEND lt_contents_txt.
     lt_contents_txt-line = 'Saygılarımızla,'.
     APPEND lt_contents_txt.CLEAR lt_contents_txt.


     CLEAR lt_packing_list.
     lt_packing_list-transf_bin  = space.
     lt_packing_list-head_start  = 1.
     lt_packing_list-head_num    = 0.
     lt_packing_list-body_start  = 1.
     lt_packing_list-body_num    = LINES( lt_contents_txt ).
     lt_packing_list-doc_type    = 'RAW'.
     APPEND lt_packing_list.
     CLEAR lt_packing_list.




     CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
       EXPORTING
         line_width_src              = 134
         line_width_dst              = 255
       TABLES
         content_in                  = lt_pdfdata
         content_out                 = lt_contents_bin
       EXCEPTIONS
         err_line_width_src_too_long = 1
         err_line_width_dst_too_long = 2
         err_conv_failed             = 3
         OTHERS                      = 4.


*Filling the details in SAPoffice: Description of Imported Object
*Components table
     DESCRIBE TABLE lt_contents_bin LINES lv_tab_lines.
     CLEAR lt_contents_bin.
     READ TABLE lt_contents_bin into lt_cont INDEX lv_tab_lines.


     IF sy-subrc = 0.


       CLEAR: lt_packing_list.
*      lt_packing_list-transf_bin = 'X'.
*      lt_packing_list-head_start = 1.
*      lt_packing_list-head_num = 1.
*      lt_packing_list-body_start = 1.
*      lt_packing_list-body_num = lv_tab_lines.
       lt_packing_list-obj_langu = sy-langu.
       lt_packing_list-doc_type = 'PDF'.
       lt_packing_list-obj_name = 'ATTACHMENT'.
       lt_packing_list-obj_descr = 'ZFUAR ÇIKTI.PDF'.
       lt_packing_list-doc_size = lv_tab_lines * 255.
       APPEND lt_packing_list.CLEAR lt_packing_list.
     ENDIF.


      CLEAR ls_document_data.
     ls_document_data-obj_name = 'SMARTFORM'.
     ls_document_data-obj_descr = 'SMARTFORM'.
     ls_document_data-expiry_dat  = sy-datum + 10.
     ls_document_data-sensitivty = 'F'.
     ls_document_data-doc_size = ( lv_tab_lines - 1 ) * 255 +
     strlen( lt_cont ).


     lv_put_in_outbox = lv_commit_work = 'X'.

Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1

Former Member — Wed, 04 Mar 2015 17:13:26 GMT

Hi,

Can you please cross check with the below link code

Regards,

Rafi

Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1

Former Member — Wed, 04 Mar 2015 17:16:07 GMT

Hi,

Please refer this as well.

Convert Spool to PDF

Regards,

Rafi

Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1

f_cemunal — Wed, 04 Mar 2015 20:05:23 GMT

hi,

i have checked them all for at least 2 times.it is still giving me exception 2.

is there basis like adjustment in sap to enable send mails ? because there is nothing in SOST.

thank you for your answers.

Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1

Former Member — Thu, 05 Mar 2015 09:22:37 GMT

Hi,

Please paste here once again your latest code.

If it is still difficult with FM SO_DOCUMENT_SEND_AP1I then you can use the class CL_BCS it is very simpler than SO_DOCUMENT_SEND_AP1I.

Regards,

Rafi

Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1

f_cemunal — Thu, 05 Mar 2015 09:23:45 GMT

hi,

i have found the problem.

mail arrangements of the system has not been done so sender adress has to be filled manually.

Re: document_not_sent exception with fm SO_DOCUMENT_SEND_API1

Former Member — Thu, 05 Mar 2015 09:30:20 GMT

Hi,

The code goes here

types:

**For Email Body
ty_email_body TYPE STANDARD TABLE OF solisti1 .

**Declaration for mail sending using classes
   DATA: l_send_request   TYPE REF TO cl_bcs,
         l_document       TYPE REF TO cl_document_bcs,
         l_recipient      TYPE REF TO if_recipient_bcs,
         l_bcs_exception TYPE REF TO cx_bcs,
         l_lines          TYPE i,                        " Lines count
         l_size           TYPE sood-objlen.              " Size of Attachment
*        l_extension      TYPE soodk-objtp VALUE 'RAW'. " TXT format

   DATA: l_sent_to_all TYPE os_boolean,
         l_subject     TYPE sood-objdes,
         l_error       TYPE sy-subrc,
         l_attach_head TYPE soli_tab.

   TRY.
*     -------- create persistent send request ------------------------
       l_send_request = cl_bcs=>create_persistent( ).
*     -------- create and set document with attachment ---------------
*     create document object from internal table with text
       l_subject = i_mail_subject.

       l_document = cl_document_bcs=>create_document(
       i_type    = i_extension
       i_text    = i_email_text
       i_subject = l_subject ).

* Attachment for records
       l_lines = lines( i_attachment ).
       l_size = l_lines * 255.

       l_document->add_attachment(
       i_attachment_type    = i_extension
       i_attachment_subject = l_subject
       i_attachment_size    = l_size
       i_att_content_text   = i_attachment ).

*     add document object to send request
       l_send_request->set_document( l_document ).
*     --------- add recipient (e-mail address) -----------------------
*     create recipient object
       l_recipient = cl_cam_address_bcs=>create_internet_address( i_email_address   ).
*     add recipient object to send request
       l_send_request->add_recipient( l_recipient ).
*     ---------- send document ---------------------------------------
       l_sent_to_all = l_send_request->send( i_with_error_screen = 'X' ).

       IF l_sent_to_all IS NOT INITIAL.
         COMMIT WORK.
* Populate error return code
         l_error = sy-subrc.
       ELSE.
         l_error = 4.
       ENDIF.
*   ------------ exception handling ----------------------------------
     CATCH cx_bcs INTO l_bcs_exception.
       l_error = 4.
   ENDTRY.