topic Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN in Application Development and Automation Discussions

Error by using bapi BAPI_ALM_ORDER_MAINTAIN

Former Member — Fri, 24 Oct 2014 06:53:53 GMT

Hi,

Am tyring to upadte the data at tcode /isdfps/lmfl02.(For operations & service lines)

For operations, Its updating successfully But for service lines its prompting below error:

E SRV 007 "The field MATL_GROUP is customised as Hidden mode" MATL_GROUP

Hence request you to suggest me how to overcome on this.

Thank u in advance.

Below is the code for reference:

   clear wa_methods.
wa_methods-refnumber = '000001'.
wa_methods-objecttype = 'HEADER'.
* wa_methods-method = 'CREATE'.
   wa_methods-method = 'CHANGE'.
wa_methods-objectkey = '000008000141'.
append wa_methods to it_methods. clear wa_methods.

*-- Operation Mapping
wa_methods-refnumber = '000001'. " Operation-1
wa_methods-objecttype = 'OPERATION'.
* wa_methods-method = 'CREATE'.
   wa_methods-method = 'CHANGE'.
concatenate '000008000141' '0010' into wa_methods-objectkey.
append wa_methods to it_methods. clear wa_methods.

*----serviceline
   wa_methods-refnumber = '000001'. " Operation-1
   wa_methods-objecttype = 'SERVICELINE'.
*   wa_methods-method = 'DIALOG'.
   wa_methods-method = 'CREATE'.
* concatenate '000008000121' '0010' into wa_methods-objectkey.
concatenate '000008000141' '0010' into wa_methods-objectkey.
append wa_methods to it_methods. clear wa_methods.

wa_methods-refnumber = '000001'.
wa_methods-objecttype = ''.
wa_methods-method = 'SAVE'.
wa_methods-objectkey = '000008000141'.
append wa_methods to it_methods. clear wa_methods.

*release
   wa_methods-refnumber = '000001'.
   wa_methods-objecttype = 'HEADER'.
* wa_methods-method = 'CREATE'.
   wa_methods-method = 'RELEASE'.
   wa_methods-objectkey = '000008000141'.
append wa_methods to it_methods. clear wa_methods.

*-- Header Mapping
clear wa_header.
wa_header-orderid = '000008000141'.
wa_header-order_type = 'FL01'.   " order type
wa_header-planplant = 'CX01'.     " plant
wa_header-mn_wk_ctr = 'CX-FLODR'.    " work center
wa_header-START_DATE = '20141017'. "17.10.2014
wa_header-BASICSTART = sy-uzeit.
wa_header-short_text = 'XYZ'. "short text value
append wa_header to it_header. clear wa_header.

clear wa_operation.
wa_operation-activity = '0010'.
wa_operation-control_key = 'PM03'.
wa_operation-WORK_CNTR = 'CX-FLODR'.
wa_operation-PLANT = 'CX01'.
wa_operation-DESCRIPTION = 'WXYZ'.
wa_operation-MATL_GROUP = '008003'.
append wa_operation to it_operation. clear wa_operation.

clear wa_SERVICELINES.
wa_SERVICELINES-ACTIVITY = '0010' .
wa_SERVICELINES-OUTLINE = '0000000001'.
wa_SERVICELINES-SRV_LINE = '0000000010'.
wa_SERVICELINES-SERVICE = '000000000003000006'.
wa_SERVICELINES-SHORT_TEXT = 'Landing Service BR'.
wa_SERVICELINES-USERF1_TXT = 'WXYZ'.
wa_SERVICELINES-QUANTITY   = '3'.
wa_SERVICELINES-GROSS_PRICE = '1.00'.
wa_SERVICELINES-MATL_GROUP = '008003'.

append wa_SERVICELINES to it_SERVICELINES.

refresh return.
call function 'BAPI_ALM_ORDER_MAINTAIN'
    TABLES
      it_methods       = it_methods
      it_header        = it_header
      it_header_up     = it_header_up
      it_header_srv    = it_header_srv
      it_header_srv_up = it_header_srv_up
      it_userstatus    = it_userstatus
*      it_partner       = it_partner
*      it_partner_up    = it_partner_up
      it_operation     = it_operation
      it_operation_up = it_operation_up
      it_relation      = it_relation
      it_relation_up   = it_relation_up
      it_component     = it_component
      it_component_up = it_component_up
      it_text          = it_text
      it_text_lines    = it_text_lines
      extension_in     = extension_in
      return           = return
      et_numbers       = et_numbers
      IT_SERVICELINES = IT_SERVICELINES.

loop at return into wa_return.
endloop.
skip.
loop at et_numbers into wa_numbers.
    createdorder = wa_numbers-aufnr_new.
    exit.
endloop.

call function 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.

CALL FUNCTION 'DEQUEUE_ALL'
    EXPORTING
      _SYNCHRON = 'X'.
commit work and wait.

************************

am getting above error message in return iTAB.

Please help me to solve this error.

BR,

Shabas

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

Former Member — Fri, 24 Oct 2014 06:56:17 GMT

Could Anyone help me on this.

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

FredericGirod — Fri, 24 Oct 2014 06:56:17 GMT

that looks like a customizing issue, not a developpment

regards

Fred

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

Former Member — Fri, 24 Oct 2014 06:58:10 GMT

Hi Frédéric,

Thank you for prompt response.

Could you please suggest me where can I will do this customizing changes.

Thank u in advance.

BR,

Shabs

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

RaymondGiuseppi — Fri, 24 Oct 2014 07:16:42 GMT

You could try, but ask functional, developer are not often masters of Customizing...

Enter transaction SPRO.
- Select Maintenance and Service Processing
  - Select Define Field Selection for Order Operation (PM and CS)
  - Select Define Field Selection for Components (PM and CS)

Seems there is a difference for Material Group

Regards,

Raymond

PS: Is "where can I will" a revealing slip ?

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

Former Member — Fri, 24 Oct 2014 08:32:10 GMT

Raymond,

Thank you for your reply.

Am getting the error like "The field MATL_GROUP is customised as Hidden mode".

But I hav checked in configration, It not showing in hidden mode.

How can we overcome this issue.

Please suggest.

Br,
Shabas

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

RaymondGiuseppi — Fri, 24 Oct 2014 08:50:08 GMT

Try to execute same operation with IW32 (*) if that is not possible, ask functional to revise his requirement.

Regards,

Raymond

(*) add an external service PM03 item to an existing order operation list and check field material group, is input allowed ?

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

Former Member — Fri, 24 Oct 2014 10:49:23 GMT

Raymond,

Thank you for your response.

Now am able to update the service line details as well. But mutliple service line items are not populating. Below is the code for the same.

Request you to suggest me how to upload multiple service line entries under one operation entry.

Code:

**service line 2 entry

wa_methods-refnumber = '000002'. " Operation-1

wa_methods-objecttype = 'SERVICELINE'.

* wa_methods-method = 'DIALOG'.

wa_methods-method = 'CREATE'.

concatenate '000008000148' '0020' into wa_methods-objectkey.

append wa_methods to it_methods. clear wa_methods.

clear wa_SERVICELINES.
wa_SERVICELINES-ACTIVITY = '0010' .
wa_SERVICELINES-OUTLINE = '0000000001'.
wa_SERVICELINES-SRV_LINE = '0000000010'.
wa_SERVICELINES-SERVICE = '000000000003000006'.
wa_SERVICELINES-SHORT_TEXT = 'Landing Service BR'.
*wa_SERVICELINES-USERF1_TXT = 'WXYZ'.
wa_SERVICELINES-QUANTITY = '3'.
wa_SERVICELINES-GROSS_PRICE = '1.00'.
wa_SERVICELINES-NET_PRICE = '1.00'.
*wa_SERVICELINES-MATL_GROUP = '008003'.
append wa_SERVIELINES to it_SERVICELINES.

clear wa_SERVICELINES.
wa_SERVICELINES-ACTIVITY = '0020' .
wa_SERVICELINES-OUTLINE = '0000000001'.
wa_SERVICELINES-SRV_LINE = '0000000010'.
wa_SERVICELINES-SERVICE = '000000000003000006'.
wa_SERVICELINES-SHORT_TEXT = 'Landing Service BR'.
wa_SERVICELINES-QUANTITY = '3'.
wa_SERVICELINES-GROSS_PRICE = '1.00'.
wa_SERVICELINES-NET_PRICE = '1.00'.
append wa_SERVICELINES to it_SERVICELINES.

   refresh return.
call function 'BAPI_ALM_ORDER_MAINTAIN'
    TABLES
      it_methods       = it_methods
      it_header        = it_header
      it_header_up     = it_header_up
      it_header_srv    = it_header_srv
      it_header_srv_up = it_header_srv_up
      it_userstatus    = it_userstatus
*      it_partner       = it_partner
*      it_partner_up    = it_partner_up
      it_operation     = it_operation
      it_operation_up = it_operation_up
      it_relation      = it_relation
      it_relation_up   = it_relation_up
      it_component     = it_component
      it_component_up = it_component_up
      it_text          = it_text
      it_text_lines    = it_text_lines
      extension_in     = extension_in
      return           = return
      et_numbers       = et_numbers
      IT_SERVICELINES = IT_SERVICELINES.

loop at return into wa_return.
endloop.
skip.
loop at et_numbers into wa_numbers.
    createdorder = wa_numbers-aufnr_new.
    exit.
endloop.

call function 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.

    CALL FUNCTION 'DEQUEUE_ALL'
    EXPORTING
      _SYNCHRON = 'X'.
commit work and wait.

Thank u in advance.

BR,

shabas

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

Former Member — Mon, 03 Nov 2014 10:22:29 GMT

Hi,

Could anyone help me on this. please

BR,

Shabas

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

Former Member — Tue, 04 Nov 2014 10:27:21 GMT

Hi,

Could anyone help me on this. please

BR,

Shab

Re: Error by using bapi BAPI_ALM_ORDER_MAINTAIN

manukapur — Tue, 20 Sep 2016 09:40:35 GMT

Any updates on this issue? I am having the same issue.