topic Re: BAPIRET2 empty message and type in Application Development and Automation Discussions

BAPIRET2 empty message and type

Former Member — Mon, 04 Aug 2014 15:55:57 GMT

Hi Experts,

I'm very new to ABAP (and I like it ).

Below my first steps in ABAP:


DATA : answer         TYPE        BAPIRET2.
DATA : mmarket        TYPE        BAPI2042_MAINTAIN_MM.


          mmarket-transaction_type = '100'.
           mmarket-partner = '10000'.
           mmarket-start_term = '04082014'.
           mmarket-end_term = '04082014'.
           mmarket-amount = 1000000.
           mmarket-currency = 'EUR'.
           mmarket-interest_rate = '1.37'.
           CALL FUNCTION 'BAPI_FTR_CREATEFROMDATA'
             EXPORTING
               MONEYMARKET     = mmarket
 *             FOREIGNEXCHANGE =
               COMPANYCODE     = 'DE01'
               PRODUCTTYPE     = '510'
             IMPORTING
               RETURN          = answer
 *             TRANSACTION     =
 *             COMPANYCODE     =
             EXCEPTIONS
               ERROR           = 1
               OTHERS          = 2.
 
           IF SY-SUBRC <> 0.
 *         Implement suitable error handling here
             WRITE : / 'Fehler im System'.
           ENDIF.
 
           WRITE : / answer-message.
           WRITE : / answer-type.
           WRITE : / answer-id.
           WRITE : / answer-number.
           WRITE : / answer-log_no.
           WRITE : / answer-log_msg_no.
           WRITE : / answer-parameter.
           WRITE : / answer-row.
           WRITE : / answer-field.

I want to call the BAPI and fill in the form.

answer-message and answer-type is empty. It seems that there is no error but shouldn't I get a success message like "S" in Type?

It is possible that the valuation area can not be filled with this BAPI?

Thanks for your help.

Xaavian

Re: BAPIRET2 empty message and type

Former Member — Mon, 04 Aug 2014 16:28:58 GMT

Reading the help on the FM (specifically the return parameter) will answer your question.

"If an error occurs, this parameter contains the error number and text once the method returns to the program calling it up. If there are no errors, the parameter is left blank."

Ergo, a blank return structure indicates a successful call.

Regards,

Aaron

Re: BAPIRET2 empty message and type

Former Member — Mon, 04 Aug 2014 17:23:55 GMT

Hi Faruq,

Are you able to create the document successfully using this BAPI? Yes, you should get success message, message ID, type, number etc. in the return structure. Once the return type is 'S', call BAPI: BAPI_TRANSACTION_COMMIT to complete the transaction.

Thanks,
Shreekant

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 06:46:35 GMT

Hi Shreekant,

currently I'm not able to create the document successfully. Is there any parameter missing?

The code seems to be correct.

Thanks,

Faruq

Re: BAPIRET2 empty message and type

Mohamed_Mukhtar — Tue, 05 Aug 2014 07:17:23 GMT

Hello Faruq,

The filed 'RETURN' is a structure in FM BAPI_FTR_CREATEFROMDATA
'RETURN' is nowhere filled in FM BAPI_FTR_CREATEFROMDATA
I suggest debug FM BAPI_FTR_CREATEFROMDATA and check the contents in internal table 'l_tab_return'.
You may need to implement implicit enhancement to export the values of 'l_tab_return' to memory in FM BAPI_FTR_CREATEFROMDATA and the same can be imported in your program.

Thanks

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 07:23:48 GMT

Hi Learner,

DATA : answer TYPE BAPIRET2.

...

CALL FUNCTION 'BAPI_FTR_CREATEFROMDATA'
             EXPORTING
               MONEYMARKET     = mmarket
               COMPANYCODE     = 'DE01'
               PRODUCTTYPE     = '510'
             IMPORTING
               RETURN          = answer
             EXCEPTIONS
               ERROR           = 1
               OTHERS          = 2.

RETURN is filled. When I call the FM with an missing attribute it throws an error 'E'.

Also the SY-SUBRC returns 0.

Thanks,

Faruq

Re: BAPIRET2 empty message and type

Mohamed_Mukhtar — Tue, 05 Aug 2014 07:36:15 GMT

Hello Faruq,

Please share the message number and message class.

Thanks

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 07:42:08 GMT

Hello Learner,

could you please tell me exactly what you want me to share? (I'm very new to ABAP)

I really do not know what to share.

Thanks,

Faruq

Re: BAPIRET2 empty message and type

Mohamed_Mukhtar — Tue, 05 Aug 2014 07:56:49 GMT

Hello faruq,

Share the contents of answer structure.

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 08:03:10 GMT

Once your code will be execute then check SY-SUBRC Value or Return Value...Return value will show exactly where is the problem..

Regards,

Nadim

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 08:06:54 GMT

Hi Farug,

If you look inside the BAPI , you can see BAPI will return only errors( E or A type), if you getting return blank means BAPI call is successful . After return is blank then call BAPI_TRANSACTION_COMMIT.

As learner suggested, keep break point at end of BAPI, Check l_tab_return contains any warning or information messages.

Thanks & Regards,

Arun

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 08:16:06 GMT

Hi Arun,

l_tab_return does not contain any messages or warnings. It is empty.

BAPI_TRANSACTION_COMMIT should create a new contract but it does not.

IF answer-type IS INITIAL.
             DATA : returncode     TYPE        BAPIRET2.
             CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*             EXPORTING
*               WAIT          =
               IMPORTING
                 RETURN        = returncode.
             WRITE : / returncode-message.
             WRITE : / returncode-type.
             WRITE : / returncode-id.

The contents of answer are:

000

000000

Thanks,

Faruq

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 08:32:47 GMT

Hi Faruq,

Certain BAPIs return only Error messages. If there is no error, then the return structure is initial i.e., blank.

In 'BAPI_FTR_CREATEFROMDATA' , only error messages are returned. So, instead of checking for the SY_SUBRC value after the Function call, you could check the return structure.

For Eg.

IF answer IS NOT INITIAL. (or IF answer-type = 'E'.)

* Implement suitable error handling here

WRITE : / 'Fehler im System'.

EXIT.

ENDIF.

Then Call the BAPI_TRANSACTION_COMMIT, if there are no errors.

Hope, this helps.

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 08:44:51 GMT

Faruq,

If return or l_tab_return is empty, then your document will be created successfully. Check the corresponding transaction number. For that you need to use Importing parameter TRANSACTION in your BAPI call.

     CALL FUNCTION 'BAPI_FTR_CREATEFROMDATA'
             EXPORTING
               MONEYMARKET     = mmarket
               COMPANYCODE     = 'DE01'
               PRODUCTTYPE     = '510'

IMPORTING

RETURN = answer

TRANSACTION = ls_transaction

EXCEPTIONS

ERROR = 1

OTHERS = 2.

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 09:30:58 GMT

Hi Sharmila,

thanks for your answer.

I tried your suggestion:

DATA : ls_transaction TYPE BAPI2042-TRANSACTION.

CALL FUNCTION 'BAPI_FTR_CREATEFROMDATA'
             EXPORTING
               MONEYMARKET     = mmarket
*             FOREIGNEXCHANGE =
               COMPANYCODE     = 'DE01'
               PRODUCTTYPE     = '510'
             IMPORTING
               RETURN          = answer
               TRANSACTION     = ls_transaction
*             COMPANYCODE     =
             EXCEPTIONS
               ERROR           = 1
               OTHERS          = 2.

WRITE : / ls_transaction.

ls_transaction is empty.

The whole code is:


DATA : answer         TYPE        BAPIRET2.
 DATA : mmarket        TYPE        BAPI2042_MAINTAIN_MM.
 DATA : ls_transaction TYPE        BAPI2042-TRANSACTION.
 DATA : ls_companycode TYPE        BAPI2042-COMPANY_CODE.
 DATA : returncode     TYPE        BAPIRET2.
 
 mmarket-transaction_type = '100'.
 mmarket-partner = '10000'.
 mmarket-start_term = '05082014'.
 mmarket-end_term = '05102014'.
 mmarket-amount = 1000000.
 mmarket-currency = 'EUR'.
 mmarket-currency_iso = 'EUR'.
 mmarket-interest_rate = '1.37'.
 mmarket-calculate_method = 2.
 mmarket-trader = 'Alavi'.
 
 CALL FUNCTION 'BAPI_FTR_CREATEFROMDATA'
   EXPORTING
     MONEYMARKET     = mmarket
 *   FOREIGNEXCHANGE =
     COMPANYCODE     = 'DE01'
     PRODUCTTYPE     = '510'
   IMPORTING
     RETURN          = answer
     TRANSACTION     = ls_transaction
     COMPANYCODE     = ls_companycode
   EXCEPTIONS
     ERROR           = 1
     OTHERS          = 2.
 
 IF SY-SUBRC <> 0.
 *         Implement suitable error handling here
   WRITE : / 'Fehler im System'.
 ENDIF.
 
 WRITE : / answer-message.
 WRITE : / answer-type.
 WRITE : / answer-id.
 WRITE : / ls_transaction.
 WRITE : / ls_companycode.
 
 IF answer-type IS INITIAL.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 *   EXPORTING
 *     WAIT          =
     IMPORTING
       RETURN        = returncode.
   WRITE : / returncode-message.
   WRITE : / returncode-type.
   WRITE : / returncode-id.
 ENDIF.

Thanks,

Faruq

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 09:43:18 GMT

Faruq,

Internal date format is YYYYMMDD. So, your dates should be

mmarket-start_term = '20140804'. (Whatever is the date, give it in YYYYMMDD format)

mmarket-end_term = '20140804'.

Change the date values and try.

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 09:46:12 GMT

Thanks Sharmila,

changed without effect.

Re: BAPIRET2 empty message and type

Mohamed_Mukhtar — Tue, 05 Aug 2014 09:47:14 GMT

Hello Faruq.

Add FM to add leading zeroes to mmarket-partner.

CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
   EXPORTING
     input         = mmarket-partner
IMPORTING
    OUTPUT        = mmarket-partner.

CALL FUNCTION 'BAPI_FTR_CREATEFROMDATA'
EXPORTING
MONEYMARKET = mmarket
* FOREIGNEXCHANGE =
COMPANYCODE = 'DE01'
PRODUCTTYPE = '510'
IMPORTING
RETURN = answer
TRANSACTION = ls_transaction
COMPANYCODE = ls_companycode
EXCEPTIONS
ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
* Implement suitable error handling here
WRITE : / 'Fehler im System'.
ENDIF.

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 10:32:45 GMT

The BAPI_FTR_FTD_CREATE returns following:

l_tab_return:

ftr_gui 141: valuation area needs to be filled

ftr_trd 031: Geschäft DE01 \INTERN\ ist keine 'Allg. Bewertungsklasse' zugeordnet (no valuation area assigned)

Now I need to assign the valuation area but there is no parameter for the valuation area.

Thanks,

Faruq

Re: BAPIRET2 empty message and type

Former Member — Tue, 05 Aug 2014 10:51:49 GMT

There is no valuation area assigned to the company code DE01. Please check in table T001K.

This has to be done manually.