Step-Loop

Former Member — Fri, 23 May 2014 12:53:18 GMT

Hi Gurus,

I am new to ABAP and i am working on Step-Loops. Following is my code and called screen 9001 from my code. I named screen elements same as that in my ABAP code. It shows no syntax error and after successfull activation, values are not getting displayed on screen. After debugging my internal table is loaded with values.

Following is my code :

report ztest_013.

* Number of records to be displayed
parameters : p_num type i.

* Types to declare the internal table for records
types: begin of t_itab,
         col1 type i,
         col2 type i,
       end of t_itab.

* Internal table for the records
data: itab type standard table of t_itab,

* Work area for the records
      wa   like line of itab.

data: idx   type i,                    " Current Line to be displayed
          line type i,
      lines type i,
" Final Limit of step loop rows that can be displayed
      limit type i,
" Cursor position
      c     type i,
" Lower limit of the record index to be displayed on a page
      n1    type i value 1,
" Upper limit of the record index to be displayed on a page
      n2    type i,
" Variable to handle next page navigation
      y_v_next   type    i,
" Variable to handle previous page navigation
      y_v_prev           type    i,
      y_v_limit type i.

data: ok_code type sy-ucomm,
       save_ok type sy-ucomm.

start-of-selection.
* Building the records to be displayed as per the selection screen entry
do p_num times.
    wa-col1 = sy-index.
    wa-col2 = sy-index ** 2.
    append wa to itab.
enddo. if p_num < 0.
    n2 = p_num.
else.
    n2 = 5.
endif. call screen 9001.
*----------------------------------------------------------------------*
* MODULE status_0100 OUTPUT
*----------------------------------------------------------------------*
*
*----------------------------------------------------------------------*
*MODULE status_0100 OUTPUT.
* SET PF-STATUS 'STATUS_100'.
*ENDMODULE.                    "status_0100 OUTPUT*----------------------------------------------------------------------*
* MODULE transp_itab_out OUTPUT
*----------------------------------------------------------------------*
*
*----------------------------------------------------------------------*
module transp_itab_out output.
idx = sy-stepl + line.
read table itab into wa index idx.
endmodule.                    "transp_itab_out OUTPUT*----------------------------------------------------------------------*
* MODULE transp_itab_in INPUT
*----------------------------------------------------------------------*
*
*----------------------------------------------------------------------*
module transp_itab_in input.
lines = sy-loopc.
idx = sy-stepl + line.
modify itab from wa index idx.
endmodule.                    "transp_itab_in INPUT*----------------------------------------------------------------------*
* MODULE user_command_0100 INPUT
*----------------------------------------------------------------------*
*
*----------------------------------------------------------------------*
module user_command_9001 input.
data : y_v_index type sy-index.
data : y_lv_d   type f,
         y_lv_div type i,
         y_curr_p_num type i.
         save_ok = ok_code.
clear ok_code.
case sy-ucomm.
*    WHEN 'BACK'.
*      LEAVE TO SCREEN 0.
* When Page Down is Hit
    when 'PGDN'.
* Number of screens required for output if 5 records per screen
      y_lv_d = p_num / 5.
      y_lv_div = ceil( y_lv_d ).      y_curr_p_num = y_lv_div * 5.      y_v_index = y_v_next + 1.      if y_v_next < y_lv_div.
        y_v_next = y_v_next + 1.
      else.
        y_v_next = y_lv_div.
      endif.
      y_v_prev = y_v_next.      if y_v_next <> y_lv_div.
        n2 = p_num - 5 * y_v_next.
        if n2 > 5.
          n2 = 5 * y_v_next.
        endif.
        n1 = 1.        line = line + lines.
        limit = y_curr_p_num - lines.
        if line > limit.
          line = limit.
        endif.
      else.
        y_v_next = y_v_next - 1.
      endif.
* When Page Up is Hit
    when 'PGUP'.
      n2 = 5 * y_v_next.
      if n1 < 0.
        n1 = 1.
      endif.      if y_v_next > 0.
        y_v_next = y_v_next - 1.
      else.
        y_v_next = 0.
      endif.
      y_v_prev = y_v_next.      if line ne 0 and y_curr_p_num gt 5.
        line = y_v_next * 5.
      else.
        line = 0.
        y_v_index = y_v_next - 1.
      endif.      if line < 0.
        line = 0.
      endif.
endcase.
endmodule.                    "user_command_0100 INPUT*----------------------------------------------------------------------*
* MODULE cancel INPUT
*----------------------------------------------------------------------*
*
*----------------------------------------------------------------------*
*MODULE cancel INPUT.
* LEAVE PROGRAM.
*ENDMODULE.                    "cancel INPUT
*&---------------------------------------------------------------------*
*&      Module PGUP_DOWN OUTPUT
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
module pgup_down output. data : y_v_div type i,
         y_v_d type f,
         y_v_temp type i.
describe table itab[] lines p_num. y_v_d = p_num / 5.
y_v_limit = ceil( y_v_d ).
y_v_temp = y_v_limit - 1. if p_num le 5.
    perform y_f_hide_field using 'PD'.
    perform y_f_hide_field using 'PU'.
elseif y_v_next = y_v_limit .
    perform y_f_hide_field using 'PD'.
    perform y_f_show_field using 'PU'.
elseif y_v_prev is initial.
    perform y_f_hide_field using 'PU'.
elseif y_v_next gt y_v_limit.
    perform y_f_hide_field using 'PD'.
elseif y_v_temp = y_v_next.
    perform y_f_hide_field using 'PD'.
endif.endmodule.                 " PGUP_DOWN OUTPUT
*&---------------------------------------------------------------------*
*&      Form Y_F_HIDE_FIELD
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*      -->P_0372   text
*----------------------------------------------------------------------*
form y_f_hide_field using    value(p_name).
loop at screen.
    if screen-name = p_name.
      screen-active    = '0'.
      screen-invisible = '1'.
      modify screen.
      exit.
    endif.
endloop.endform.                    " Y_F_HIDE_FIELD
*&---------------------------------------------------------------------*
*&      Form Y_F_SHOW_FIELD
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*      -->P_0388   text
*----------------------------------------------------------------------*
form y_f_show_field using    value(p_name). loop at screen.
    if screen-name = p_name.
      screen-active = '1'.
      modify screen.
      exit.
    endif.
endloop.endform.                    " Y_F_SHOW_FIELD

Re: Step-Loop

Former Member — Fri, 23 May 2014 13:52:15 GMT

guys....please help

Re: Step-Loop

ThomasZloch — Fri, 23 May 2014 14:58:42 GMT

Step-loops are outdated since maybe 1995...better learn something meaningful.

Have a look around SCN and the "custom development" spaces, there is plenty of inspiration.

Thomas

Re: Step-Loop

former_member202818 — Mon, 26 May 2014 05:17:38 GMT

HI Aditya..

Better you go for Table Control..

Regards

Sreekanth

Re: Step-Loop

Former Member — Mon, 26 May 2014 06:25:37 GMT

Hi Aditya,

Use Table controls instead of Step loops as they are obsolete.

Table controls are just similar to the step loops except for the fact that multiple lines cannot be built like in step loops which are expanded in a single row.

Browsing SCN you can find many other advantages of using Table Control instead of Step loops.

Regards,

AyyamPerumal

topic Re: Step-Loop in Application Development and Automation Discussions

Step-Loop

Re: Step-Loop

Re: Step-Loop

Re: Step-Loop

Re: Step-Loop