topic Re: IDOC Configuration Help in Application Development and Automation Discussions

IDOC Configuration Help

Former Member — Wed, 12 Mar 2014 06:14:43 GMT

hello,

i have just started learning concepts of IDOC and ALE.

And found some docuemnts for the same.

WE have 2 clients in our dev server. 700 & 600.

I want to test idoc concepts on these clients of same servers.

Firstly i checked logical systems on client 700.

Have a look.

here 600 client is not shown but it exists in our system.

Moreover , 400 client is shown..but it does not exists in our system.

Here is the view of table T000

Please tell me...what this is all about.

Whether i need to create a new logical system or assign client to existing logical system

or nothing.In order to run idoc's?

Re: IDOC Configuration Help

ThangaPrakash — Wed, 12 Mar 2014 06:33:27 GMT

Hello Abhishek,

Here 400 is not a client and it is the name of the logical system.

Client 600 uses the logical system 400.

So I guess you don't need to do any changes or adjustments here.

Regards,

Thanga

Re: IDOC Configuration Help

Former Member — Wed, 12 Mar 2014 06:45:09 GMT

So u are saying that i dont need to create a new logical system and not even assign it to a client.

I guess that already done.

Thanga,

Please assist me in identifying the RFC Connections and understand their concept.SM59.

I am posting screen-shot of the ABAP Connections and help me,if there exists connection for client 700 to 600.

Or should i say logical system 700 to logical system 400.

If not how to create a new connection.

Re: IDOC Configuration Help

ThangaPrakash — Wed, 12 Mar 2014 07:06:49 GMT

If you want to create a new SM59 connection, click on the create connection button and create it.

Search in SCN Wikis and you will get documents on how to set up the new connection.

Regards,

Re: IDOC Configuration Help

Former Member — Wed, 12 Mar 2014 07:18:09 GMT

Actaully the problem is i dont know how to identify whether the connection from logical system 700 to logical system 400 exists.

Please guide me how to identity particular RFC Connection for this purpose.

Re: IDOC Configuration Help

Former Member — Wed, 12 Mar 2014 07:36:19 GMT

Hi abhishek bansal,

find below attached file , it resolves your problem...

regard's

M.Nagendra

Re: IDOC Configuration Help

Former Member — Wed, 12 Mar 2014 08:51:55 GMT

how to open this xml file?

Re: IDOC Configuration Help

Former Member — Wed, 12 Mar 2014 14:01:47 GMT

Hi,

download the file and open with MS Office word document as a xml ...

regard's

M.Nagendra

Re: IDOC Configuration Help

anupam_anand — Wed, 12 Mar 2014 14:27:01 GMT

Hi Abhishek,

Refer the steps below and let me know if it helped.

ALE configuration normally involves the seven basic steps which are:

1. Creating users for ALE Transfer
2. Creating Logical system and assign the client
3. Creating the RFC
4. Configuring Distribution Model
5. Configuring and checking the port
6. Configuring and checking the partner profile
7. Creating the message type

The steps to configure and use it is mentioned below:

Notes: 105 is Sender and 800 Receiver System in the example below:
1. Create Users for ALE transfer in both receiving and sending client/systems.
Create users in both the client/systems giving the same user name and proper authorizations. We need to use these user ids to logon through the remote connection and perform the IDOC transfers.

2. Creating Logical Systems
o       Create logical systems for both sending and receiving systems in both systems.
o       Login to Client 105 (SENDER)
o       Go to T. Code SALE
o       Expand Sending and Receiving Systems
o       Expand Logical Systems
o       Click on Define Logical System
o       Click on New Entries
o       Create Logical Systems with naming convention 'system name'+'CLNT'+client no . For example for sending system ex: SSPCLNT105
o       Create Logical Systems with naming convention 'system name'+'CLNT'+client no ex: example for receiving system ex SEDCLNT800
o       Save and come back
o       Click on Assign client 105 to Logical system SSPCLNT105
o       Now, logon to client 800, repeat the same above process to create logical systems SEDCLNT800 and SSPCLNT105
o       Save and come back
o       Click on Assign client 800 to Logical system SEDCLNT800

3. Creating the RFCs
o       In client 105, Go to T. Code SM59
o       Expand R/3 Connections
o       Enter RFC Name as SSPCLNT105 (give this name same as that of logical name created in step1 so that the ports are automatically created)
o       Connection Type as 3
o       Language as EN
o       Give the logon details for client 800 (usually, we create a new user with proper authorizations for this ALE data transfer)
o       Click on Remote logon button to test the RFC
o       Now, go to client 800 and repeat the same process to create the RFC connection to client 105, giving logon credentials to client 105

4. Creating Customer Distribution Model

(we usually create this in the original system(sending system) and then distribute it to other systems. The actual creation of the model requests that you mention a technical name for the model (unique identifier in the systems landscape), a sender system, a receiver system and message types to exchange between those systems.)

o In Client 105, Go to T. Code BD64
o       Click on change and Create model view button
o       Enter the short text and Technical name as ZSSP_SED
o       Select the model and click on Add Message Type Button,
o       Give the Sender as SSPCLNT105, Receiver as SEDCLNT800,
o       Give Message type as required, Ex: 'HRMD_A' for HR Module.(usually Message types given by SAP are available for a particular module, see this using tcode WE81, if not create a message type first)
o       Note: If we are performing this data transfer task for all modules at a Customer site, then we will need to use the appropriate message type and create a new Distribution model.
o       Select the above model view and click on Environment -> Generate Partner Profiles
o       Select Transfer IDOC Immediately and Trigger Immediately radio buttonsF
o       Click on Execute
o       You should get a list in green color which means it executed successfully.
o       Back to main screen, select the model view
o       Click Edit->Model view->Distribute
o       Click on continue
o       You should get a list saying model view is distributed successfully.

5. Checking the Port
o       In client 105, Go to T. Code WE21
o       Expand Transactional RFC
o       Find the port from the list which is created using BD64 for SEDCLNT800 (Receiving system) RFC Destination.

6. Checking the Partner Profiles.
o       In client 105, Go to T. Code WE20
o       Expand Partner Type LS
o       Select the Partner profile SEDCLNT800
o       Double click on Message Type (For Ex: In HR Module, HRMD_A in Outbound parameters.)
o       Check Receiver Port is assigned correctly
o       Check the Basic type as your Basic IDOC object.
o       In the sending system, select the option to transfer IDOCs immediately.
o       By default, in the receiving system IDOCS are bunched together and received.

7. Creating the Message Type
o       Message type defines the 'meaning' of data. It is just a logical entity that gets connected to the Idoc type (in tcode we82) or gets connected to the distribution model (in tcode BD64)
o       If necessary create a new message type. In client 105, go to tcode we81.
o       Click on change, continue
o       Click on New Entries button

o Give message type in customer namespace Z* and description

o Save and back

This should be helpful for ALE configurations.

Thanks,

Anupam

Re: IDOC Configuration Help

Former Member — Wed, 12 Mar 2014 14:32:58 GMT

Hi Abhishek bansal,

Steps in Idoc Configuration.

1.create segment in WE31.--> define the fields acts like a structure.

2.Create Idoc type in WE30

3.Create Meassage type in WE81.

4.Link message type with idoc type in WE82.

5.create an RFC connection --> SM59 ..Basis people can help you in this.

6.Create Ports -->We21

7.Define logical Systems -->BD64.

Refer the attached wiki for detailed explanations.

http://wiki.scn.sap.com/wiki/display/Community/Inbound+and+Outbound+Idoc+Configuration+Steps

Regards,

Kannan