topic Re: Delete from table in Application Development and Automation Discussions

Delete from table

Former Member — Mon, 15 May 2006 22:14:37 GMT

Hi,

I need to delete data from table which contains millions of records, Iam assuming it will take hours and also resource, can any one tell me how to delete data not with much system resource.

Thanks

Raj

Re: Delete from table

Former Member — Mon, 15 May 2006 22:21:37 GMT

Delete statement should not take much time and resource unlike modify ,append.... You dont have any choice other than that

Re: Delete from table

former_member181966 — Mon, 15 May 2006 22:31:08 GMT

Furthermore, also see the link:

http://searchsap.techtarget.com/loginMembersOnly/1,289498,sid21_gci1159707,00.html?NextURL=http%3A//searchsap.techtarget.com/tip/1%2C289483%2Csid21_gci1159707%2C00.html%3FFromTaxonomy%3D%252Fpr%252F283958

I don’t want to repeat the same code again and again!! If you’ll search delete entries on SDN, you’ll find lot of threads

Hope this’ll give you idea!!

P.S award the points.

Good luck

Thanks

Saquib Khan

"Some are wise and some are otherwise"

Re: Delete from table

Former Member — Mon, 15 May 2006 23:22:26 GMT

If u want to delete entire data better u use data base utility (se14)

Re: Delete from table

Former Member — Tue, 16 May 2006 07:16:26 GMT

Hai Raj Mitta

Delete from a database table

- DELETE FROM dbtab WHERE condition.

- DELETE FROM (dbtabname) WHERE condition.

- DELETE dbtab.

- DELETE *dbtab.

- DELETE (dbtabname) ... .

- DELETE dbtab FROM TABLE itab.

- DELETE (dbtabname) FROM TABLE itab.

- DELETE dbtab VERSION vers.

- DELETE *dbtab VERSION vers.

DELETE - Delete from a database table

Variants

1. DELETE FROM dbtab WHERE condition.

DELETE FROM (dbtabname) WHERE condition.

2. DELETE dbtab.

DELETE *dbtab.

DELETE (dbtabname) ...

3. DELETE dbtab FROM TABLE itab.

DELETE (dbtabname) FROM TABLE itab.

4. DELETE dbtab VERSION vers.

DELETE *dbtab VERSION vers.

Effect

Deletes lines in a database table . You can specify the name of the database table either in the program itself with DELETE FROM dbtab ... or at runtime as the contents of the field dbtabname with DELETE FROM (dbtabname) ... . In both cases, the database table must be known in the ABAP/4 Dictionary. If you specify the name in the program, there must also be an appropriate TABLES statement. Only data from the current client is usually deleted. You can delete data using a view only if the view refers to a single table and was created in the ABAP/4 Dictionary with the maintenance status "No restriction".

DELETE belongs to the Open SQL command set.

Note

The DELETE statement does not perform authorization checks : You must program these yourself.

Variant 1

DELETE FROM dbtab WHERE condition.

DELETE FROM (dbtabname) WHERE condition.

Addition

... CLIENT SPECIFIED

Effect

Deletes lines in a database table that satisfy the WHERE clause condition . With this variant, specification of a WHERE condition is obligatory .

When the statement has been executed, the system field SY-DBCNT contains the number of deleted lines.

The return code value is set as follows:

SY-SUBRC = 0 At least one line was deleted.

SY_SUBRC = 4 No lines were deleted, since no line was selected.

Example

Delete all bookings for the Lufthansa flight 0400 on 28.02.1995 (in the current client):

TABLES SBOOK.

DELETE FROM SBOOK WHERE CARRID = 'LH' AND

CONNID = '0400' AND

FLDATE = '19950228'.

Note

To delete all the lines in a table, you must specify a WHERE condition that is true for all lines. You can achieve this with

... WHERE f IN itab

If the internal table itab is empty, such a condition would select all lines.

Addition

... CLIENT SPECIFIED

Effect

Switches off automatic client handling. This allows you to delete data across all clients in the case of client-specific tables. The client field is then treated like a normal table field, for which you can formulate suitable conditions in the WHERE clause.

You must specify the addition CLIENT SPECIFIED immediately after the name of the database table.

Variant 2

DELETE dbtab.

DELETE *dbtab.

DELETE (dbtabname) ...

Additions

1. ... FROM wa

2. ... CLIENT SPECIFIED

Effect

These are SAP-specific short forms used to delete a single line of a database table. If the name of the database table is specified in the program, the primary key of the line to be deleted is taken from the specified work area - dbtab or *dbtab . If the name of the database table is not determined until runtime ( DELETE (dbtabname) ... ), the addition ... FROM wa is obligatory .

When the statement has been executed, the system field SY-DBCNT contains the number of deleted lines (0 or 1).

The return code value is set as follows:

SY-SUBRC = 0 The line was deleted.

SY_SUBRC = 4 No lines could be deleted, since no line exists with the primary key specified.

Example

Delete the booking with the booking number 3 for the Lufthansa flight 0400 on 28.02.1995 (in the current client):

TABLES SBOOK.

SBOOK-CARRID = 'LH'.

SBOOK-CONNID = '0400'.

SBOOK-FLDATE = '19950228'.

SBOOK-BOOKID = '00000003'.

DELETE SBOOK.

Addition 1

... FROM wa

Effect

Takes the primary key for the line to be deleted not from the table work area dbtab , but from the explicitly specified work area wa . Here, the key values from left to right are taken from wa according to the structure of the primary key in the table work area dbtab (see TABLES ). The structure of wa is not taken into account. Therefore, the work area wa must be at least as wide (see DATA ) as the primary key in the table work area dbtab and the alignment of the work area wa must correspond to the alignment of the primary key in the table work area. Otherwise, you get a runtime error.

Note

If a work area is not explicitly specified, the values for the line to be deleted are taken from the table work area dbtab , even if the statement appears in a subroutine (see FORM ) or Funktionsbaustein (see FUNCTION ) where the table work area is stored in a formal parameter or a local variable of the same name.

Addition 2

... CLIENT SPECIFIED

Effect

As with variant 1.

Variant 3

DELETE dbtab FROM TABLE itab.

DELETE (dbtabname) FROM TABLE itab.

Addition

... CLIENT SPECIFIED

Effect

Mass deletion: Deletes all database table lines for which the internal table itab contains values for the primary key fields. The lines of the internal table itab must satisfy the same condition as the work area wa in addition 1 to variant.

The system field SY-DBCNT contains the number of deleted lines, i.e. the number of lines of the internal table itab for whose key values there were lines in the database table dbtab .

The return code value is set as follows:

SY-SUBRC = 0 All lines from itab could be used to delete lines from dbtab .

SY_SUBRC = 4 For at least one line of the internal table in the database table, there was no line with the same primary key. All found lines are deleted..

Note

If the internal table itab is empty, SY-SUBRC and SY-DBCNT are set to 0.

Addition

... CLIENT SPECIFIED

Effect

As with variant 1.

Variant 4

DELETE dbtab VERSION vers.

DELETE *dbtab VERSION vers.

Note

This variant is obsolete, since variants 1 - 3 allow you to specify the database table name dynamically.

Effect

Deletes a line in a database table, the name of which is taken from the field vers at runtime. The database table must be known to the ABAP/4 Dictionary and its name must conform to the following naming convention: It must begin with 'T' and can consist of four additional characters. The field vers must contain the table name without a leading 'T'. Only lines in the current client are deleted. The line to be deleted is taken from the statically specified table work area dbtab or *dbtab .

The return code value is set as follows:

SY-SUBRC = 0 The line was deleted.

SY_SUBRC = 4 No lines could be deleted because no line existed with the specified primary key.

Thanks & Regards

Sreenivasulu P

Re: Delete from table

Former Member — Tue, 16 May 2006 07:32:58 GMT

hii

try this ..

i guess it wont consume much of system resources

select * from ZTABLE.

delete ztable.

endselect.

Define an internal table of structure as your table.

select all the records into the internal table.

delete from ztable from table internaltable.

data: itab type table of ztable.

select * into table itab from ztable.

DELETE ztable FROM TABLE itab .

regards

Naresh

Re: Delete from table

Former Member — Tue, 16 May 2006 07:54:04 GMT

Hi Raj,

delete dbtab.

will do that.

or else if you have table maintenance then select all and delete the entries.

Regards

vijay

Re: Delete from table

Former Member — Tue, 16 May 2006 07:58:25 GMT

Hi Raj,

Refer the following demo programs in SE38.

DEMO_INT_TABLES_DELETE_FROM

DEMO_INT_TABLES_DELETE_IND_1

DEMO_INT_TABLES_DELETE_IND_2

DEMO_INT_TABLES_DELETE_IND_3

DEMO_INT_TABLES_DELETE_WHERE

Use the one which suits your requirement.

Please reward points if it helps.

Regards,

Amit Mishra

Re: Delete from table

Former Member — Tue, 16 May 2006 08:01:09 GMT

Hi Raj,

u can try this

select * from ztable package size 10000 into table itab.

delete ztabls from table itab.

this will delete 10,000 records at a time,

Re: Delete from table

athavanraja — Tue, 16 May 2006 08:03:26 GMT

Hi Sreenivasulu Ponnadi ,

Kindly do not copy/paste ABAP key word documentation.

Regards

Raja

Re: Delete from table

ankurch — Wed, 17 Apr 2019 08:51:03 GMT

Hi Raj,

If entire data delete from table is needed, go for SE14.

Re: Delete from table

Tomas_Buryanek — Wed, 17 Apr 2019 08:56:25 GMT

This is 13 years old question.
sawa.ito is doing some updates and strangely refreshing many old questions???

Re: Delete from table

ankurch — Wed, 17 Apr 2019 09:03:08 GMT

ohh my bad, yeah I forget to check the dates, I also seen one very old thread!

Thanks for update! 🙂