topic Problem modul pool select options in Application Development and Automation Discussions

Problem modul pool select options

Former Member — Thu, 17 Oct 2013 22:17:49 GMT

Dear friends i have the following problem, I'm using a subscreen with select options but not to enter the values shown in the dockcontainer data, this is the code:

TYPES: BEGIN OF....
   ......
   endof ....

DATA:.......
.....
DATA:
*User Command
ok_code TYPE sy-ucomm,
*Variable para Docking Container
r_dock_container TYPE REF TO cl_gui_docking_container,
*Variable para Alv Grid
r_grid TYPE REF TO cl_gui_alv_grid.

SELECTION-SCREEN BEGIN OF SCREEN 300 AS SUBSCREEN.
PARAMETERS: so_mtart TYPE mara-mtart.
SELECT-OPTIONS: so_matnr for mapl-matnr,
                 so_werks FOR mapl-werks OBLIGATORY,
                 so_plnty FOR mapl-plnty DEFAULT 'N' OBLIGATORY.
SELECTION-SCREEN END OF SCREEN 300 .

START-OF-SELECTION.
*Mostrar datos
   PERFORM display_output.

*&---------------------------------------------------------------------*
*&      Form display_output
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
FORM display_output.
*Llenar catalogo
   PERFORM fill_fieldcat USING:
       'PLNAL'    'T_MAPL'    '5' 'C'    'CGH',
       .....
   .........
   ........
     CALL SCREEN 500.

ENDFORM.                    "display_output

MODULE status_0500 OUTPUT.
   SET PF-STATUS 'STATUS'.
   SET TITLEBAR 'TITLE'.
ENDMODULE.                    "status_0500 OUTPUT

MODULE create_objects OUTPUT.

*Crear Docking y control dock al lado derecho de la pantalla
   CHECK r_dock_container IS INITIAL.
   CREATE OBJECT r_dock_container
     EXPORTING
       side                        = cl_gui_docking_container=>dock_at_right
       extension                   = 980
       caption                     = 'Materials'
     EXCEPTIONS
       cntl_error                  = 1
       cntl_system_error           = 2
       create_error                = 3
       lifetime_error              = 4
       lifetime_dynpro_dynpro_link = 5.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.

   CREATE OBJECT r_grid
     EXPORTING
       i_parent          = r_dock_container
     EXCEPTIONS
       error_cntl_create = 1
       error_cntl_init   = 2
       error_cntl_link   = 3
       error_dp_create   = 4
       OTHERS            = 5.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.

   CALL METHOD r_grid->set_table_for_first_display
     CHANGING
       it_outtab                     = t_mapl
       it_fieldcatalog               = t_fieldcat
     EXCEPTIONS
       invalid_parameter_combination = 1
       program_error                 = 2
       too_many_lines                = 3
       OTHERS                        = 4.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.                           "

ENDMODULE.                    "create_objects OUTPUT

MODULE user_command_0500 INPUT.

   CASE ok_code.
     WHEN 'EXECUTE'.
       IF mapl-matnr IS NOT INITIAL.
         SELECT .......
           ............
           ............
         WHERE mara~mtart EQ so_mtart
             AND mapl~matnr EQ so_matnr
             AND mapl~werks EQ so_werks
             AND mapl~plnty EQ so_plnty.

         LOOP AT t_mapl ASSIGNING <fs_data>.
           ....................
           ..................
   CALL METHOD r_grid->refresh_table_display.
       WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
         LEAVE TO SCREEN 0.
       WHEN OTHERS.
     ENDCASE.
   ENDMODULE.

PROCESS BEFORE OUTPUT.
   MODULE status_0500.
   MODULE create_objects.

   CALL SUBSCREEN are INCLUDING 'Z75_DOCKING1' '300'.

PROCESS AFTER INPUT.
   CALL SUBSCREEN are.
   MODULE user_command_0500.

Please guide me with some hope example
Thank you for your valuable time

Regards

Re: Problem modul pool select options

Former Member — Sat, 19 Oct 2013 12:46:30 GMT

Please i can help me.

Regards

Re: Problem modul pool select options

former_member776318 — Sun, 20 Oct 2013 04:24:16 GMT

Hi Brujo,

Your query isn't very clear.

All I could understand is - you want to have select-option in a docking container of the screen.

But, what is the issue you are facing?

Re: Problem modul pool select options

Former Member — Mon, 21 Oct 2013 01:33:16 GMT

Thanks for answering...

The problem is that putting the values are not displayed in the container data

This is the query I'm using.

CASE ok_code.
WHEN 'EXECUTE'.

      IF mapl-matnr IS NOT INITIAL.
         SELECT mapl~werks mapl~plnty mapl~plnnr mapl~plnal mapl~datuv mapl~matnr
                plko~ktext plko~verwe plko~statu plko~andat plko~annam plko~aedat plko~aenam
                plkz~abdat plkz~abanz
                plas~plnkn
                mara~mtart
            INTO CORRESPONDING FIELDS OF TABLE t_mapl
           FROM mapl INNER JOIN plko ON mapl~plnty = plko~plnty
                                     AND mapl~plnnr = plko~plnnr
                                     AND mapl~plnal = plko~plnal
                     INNER JOIN plkz ON mapl~plnty = plkz~plnty
                                     AND mapl~plnnr = plkz~plnnr
                                     AND mapl~plnal = plkz~plnal
                     INNER JOIN plas ON mapl~plnty = plas~plnty
                                     AND mapl~plnnr = plas~plnnr
                                     AND mapl~plnal = plas~plnal
                     INNER JOIN mara ON mapl~matnr = mara~matnr
            WHERE mara~mtart EQ so_mtart
             AND mapl~matnr EQ so_matnr
             AND mapl~werks EQ so_werks
             AND mapl~plnty EQ so_plnty.
        ELSE.
         SELECT mapl~werks mapl~plnty mapl~plnnr mapl~plnal mapl~datuv mapl~matnr
                 plko~ktext plko~verwe plko~statu plko~andat plko~annam plko~aedat plko~aenam
                 plkz~abdat plkz~abanz
                 plas~plnkn
                 mara~mtart
             INTO CORRESPONDING FIELDS OF TABLE t_mapl
            FROM mapl INNER JOIN plko ON mapl~plnty = plko~plnty
                                      AND mapl~plnnr = plko~plnnr
                                      AND mapl~plnal = plko~plnal
                      INNER JOIN plkz ON mapl~plnty = plkz~plnty
                                      AND mapl~plnnr = plkz~plnnr
                                      AND mapl~plnal = plkz~plnal
                      INNER JOIN plas ON mapl~plnty = plas~plnty
                                      AND mapl~plnnr = plas~plnnr
                                      AND mapl~plnal = plas~plnal
                      INNER JOIN mara ON mapl~matnr = mara~matnr
             WHERE mara~mtart EQ so_mtart
                AND mapl~werks EQ so_werks
               AND mapl~plnty EQ so_plnty.
        ENDIF.

Thanks for your time.

Re: Problem modul pool select options

Former Member — Mon, 21 Oct 2013 03:55:37 GMT

This message was moderated.

Re: Problem modul pool select options

nabheetscn — Mon, 21 Oct 2013 05:05:58 GMT

Did you do a REFRESH after the values are fetched..? do a refresh of the grid using method REFRESH_TABLE_DISPLAY

Re: Problem modul pool select options

Former Member — Thu, 24 Oct 2013 19:06:55 GMT

Thank you all for help cleaning the object was solved OK_CODE
Clear: ok_code, at the end of CASE.

Regards gurus.