topic Re: Problem with Check box in module pool Programming in Application Development and Automation Discussions

Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 10:52:09 GMT

Hi,

I have developed Screen which is look like below screen.In that whenever i selected check box it is showing error 'Enter a valid value'.Actually my requirement is I have to check check box and select value in drop down.I didn't take fct code for check box and drop down.Please help.Error screen is attached below.

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 11:01:35 GMT

Hi Sai,

Could you please send your chack box and dropdown properties in a screen shot.

Thanks

Re: Problem with Check box in module pool Programming

venkateswaran_k — Tue, 03 Sep 2013 11:19:36 GMT

Hi Sai,

1. Please provide us with the properties you set for the checkbox and dropdown fields.

2. Please provide us with what you have entered under PAI ..

Regards,

Venkat

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 11:20:54 GMT

Its because it is linked to the dictionary, just declare it as a normal char field.

Refer my answer to your previous question.

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 11:21:12 GMT

Hi Sai Ganesh ,

Your question is not that clear ,and i am replying based on what i understood from your problem ,

problem is not at the screen painter .

May be you would have assigned value other than 'x' to your check box
declared checkbox wrong in the flow logic
you might have validated check box with some other value and thrown error
say if check_box != 'a'

'error message ' .

check this link out it will be helpful for you

http://help.sap.com/saphelp_nw04/helpdata/en/e6/83a0375b5dd003e10000009b38f8cf/content.htm

Regards ,

Juneed K Manha

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 11:37:19 GMT

Hi Mohan,

Thank you responding my question.Here are the screen shots for both.I didn't write anything in PAI Module.

This is for checkbox.

This is for drop down

This is my code already have.

*&---------------------------------------------------------------------*
*&      Module USER_COMMAND_0100 INPUT
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
MODULE user_command_0100 INPUT.

* Data:ok_code1 type sy-ucomm,
*         Check type c.
*
** if ok_code1 = check.
*     if CHECK = 'X'.
*       wever = 'Collective Slip'.
*       elseif
*         wever = 'Individual Slip'.
*         elseif
*           wever = 'Individual Slip with Inspection Text'.
*          " Do coding for the pop up"
*      Endif.
**    Endif.
   CASE sy-ucomm.
     WHEN 'BACK'.
*Give warning and then leave the program.
*       For clearing the screen.
       CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
         EXPORTING
          defaultoption        = 'Y'
           textline1            = 'Are you sure to Exit from the current Transaction ?'
*         TEXTLINE2            = ' '
           titel                = 'GRN CONFIRMATION'
*         START_COLUMN         = 25
*         START_ROW            = 6
*         CANCEL_DISPLAY       = 'X'
        IMPORTING
          answer               = answer.

       IF answer EQ 'J'.

         LEAVE PROGRAM.

       ELSEIF answer EQ 'N'.
*
         EXIT.
       ENDIF.

     WHEN 'EXIT'.
*Give warning and then leave the program.
*       For clearing the screen.
       CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
         EXPORTING
          defaultoption        = 'Y'
           textline1            = 'Are you sure to Exit from the current Transaction ?'
*         TEXTLINE2            = ' '
           titel                = 'GRN CONFIRMATION'
*         START_COLUMN         = 25
*         START_ROW            = 6
*         CANCEL_DISPLAY       = 'X'
        IMPORTING
          answer               = answer.

       IF answer EQ 'J'.

         LEAVE PROGRAM.

       ELSEIF answer EQ 'N'.
*
         EXIT.
       ENDIF.

     WHEN 'CANCEL'.
*            break-point.
*       For clearing the screen.
       CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
         EXPORTING
          defaultoption        = 'Y'
           textline1            = 'Are you sure to Exit from the current Transaction ?'
*         TEXTLINE2            = ' '
           titel                = 'GRN CONFIRMATION'
*         START_COLUMN         = 25
*         START_ROW            = 6
*         CANCEL_DISPLAY       = 'X'
        IMPORTING
          answer               = answer.

       IF answer EQ 'J'.

*        PERFORM clear_fields_cancel.
         MESSAGE i003(zgrn) WITH 'GRN not created.'.
         PERFORM clear_fields_cancel.
         LEAVE TO SCREEN 0100.           " phani edited"""
       ELSEIF answer EQ 'N'.
*
         EXIT.
       ENDIF.

*            LEAVE PROGRAM.

   ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 11:40:16 GMT

Hi Venkat,

Thanks for responding my question.Here is my screen shots and code.I didn't write any code.Please help me.

This is my Check box attributes

This is my drop down attributes

This is my code having in PAI user command.

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 11:40:47 GMT

Hi Sai,

The name of the variable mapped on the screen check the type of the variable it should be C and length 1.

Also double click on the error it will show you whether it is standard error or custom.. if custom check your own program for validation.

Regards

Re: Problem with Check box in module pool Programming

himanshu_gupta13 — Tue, 03 Sep 2013 11:44:40 GMT

Hi Sai,

type of checkbox should be character type of one length or the data dictionary type should also be character type of one length.

Himanshu

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 11:49:58 GMT

Hi Mohammed,

how to find system whether it is standard error or custom.I think it is standard error.I didn't write any validations for check box.I will attach my error.Please check it and help me.

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 11:52:20 GMT

Hi Himanshu,

You are right.

I have taken from dictionary i.e From MKPF table in that WEVER is having length 1 only.When ever i selected that field it is asking convert into checkbox or radio button or no need to convert.

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 12:14:44 GMT

Hi Ganesha,

Change MKPF-WEVER to another name without reference to dictionary

or VERS as shown below

It will solve your problem

Re: Problem with Check box in module pool Programming

venkateswaran_k — Tue, 03 Sep 2013 12:21:12 GMT

Dear Sai,

The problem is you have assigned the Check box attributes to MKPF-WEVER.

Actually, the valid values for the WEVER are 1,2,3 only..

When you check this box, the actual values assigned is 'X'.

so it is giving give valid value error...

Please use the simple Char value.

Regards,

Venkat

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 12:46:23 GMT

Hi Venkat,

where i will use Char value.i have to take that field from MKPF only.In MKPF table that field have length 1 only.Even i assigned wever value to BAPI Structure.Please help me.It's urget requirement.

Thanks.

Re: Problem with Check box in module pool Programming

venkateswaran_k — Tue, 03 Sep 2013 13:14:20 GMT

Dear Sai,

You cannot use WEVER field here as check box, since the valid values allowed for this field is only 1,2,3

If you still want to use the mkpf field only, then use FLS_RSTO field MKPF-FLS_RSTO which will allow the value 'X'.

Since when you check the box, the program assigns 'X' to the field internally. Because of this, the above field WEVER displays error as it is not a valid.

use MKPF-FLS_RSTO.

Regards,

Venkat

Re: Problem with Check box in module pool Programming

Former Member — Tue, 03 Sep 2013 13:49:29 GMT

Hi Sai,

Venkat is absolutly right. as you can see below screen shot. I suffered with same issue

Regards

Amit

Re: Problem with Check box in module pool Programming

himanshu_gupta13 — Tue, 03 Sep 2013 14:03:35 GMT

Hi sai,

then there would be absolutely values available in value range of domain of wever.

If yes, then you can not use it as checkbox.

Many Thanks / Himanshu Gupta

Re: Problem with Check box in module pool Programming

Former Member — Wed, 04 Sep 2013 04:44:53 GMT

Hi Venkat,

Here i am using WEVER field for Version Print,and for this I make Drop down.But as u mention above MKPF-FS_RSTO field is not for version print.then how to use it..Please help me.

Thanks

Re: Problem with Check box in module pool Programming

Former Member — Wed, 04 Sep 2013 04:45:29 GMT

Hi Amit,

Then tell me how to do.Please help me.

Thanks

Re: Problem with Check box in module pool Programming

Former Member — Wed, 04 Sep 2013 05:46:20 GMT

Hi Susmitha,

I have already tried that one also.But it is not working.When ever i selected that check box it show enter a valid value.Actually that check box is MKPF-WEVER field.