topic Re: At user_command is not working in Application Development and Automation Discussions

At user_command is not working

Former Member — Wed, 05 Dec 2012 07:35:56 GMT

hi All,

i have written below code to execute at user_command event , when i click on MATNR field it is not going to 'MM02 ' screen .

can anybody tell me what is fault in my code ?

form USER_COMMAND using ucomm like sy-ucomm selfield type slis_selfield

data : ok_code type sy-ucomm.

ok_code = ucomm.

case ok_code.

when 'MY_SELECTION'.

if selfield-fieldname = 'MATNR'.

read table it_final into wa_final index selfield-tabindex.

if not wa_final-matnr is initial.

set parameter id 'MAT' field wa_final-matnr.

call transaction 'MM02' and skip first screen.

endif.

endcase.

endform.

Re: At user_command is not working

Former Member — Wed, 05 Dec 2012 07:45:08 GMT

OK_CODE = UCOMM. (Incorrect)

OK_CODE = SY-UCOMM.. (Correct)

Avirat

Re: At user_command is not working

Former Member — Wed, 05 Dec 2012 07:47:16 GMT

Hi,

Just check whether the cursor comes into the

when 'MY_SELECTION'. in debugging mode.

i did not see any problem in ur code.

just declare the variables in the top include.

FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.

IF rs_selfield-fieldname = 'VBELN'.

* Read data table, using index of row user clicked on
READ TABLE it_final INTO wa_final INDEX rs_selfield-tabindex.

* Set parameter ID for transaction screen field
        SET PARAMETER ID 'AUN' FIELD wa_final-vbeln.
        CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
           ENDIF.
ENDCASE.ENDFORM.                    " DETAILED

regards

Ram

Re: At user_command is not working

basarozgur_kahraman — Wed, 05 Dec 2012 07:48:12 GMT

Hi Smitha,

In fieldcatalog, set hotspot for MATNR field.

if fieldcatalog-fieldname = 'MATNR'.

fieldcat-hotspot = 'X'.

endif.

and add double click event at user_command

form USER_COMMAND using ucomm like sy-ucomm selfield type slis_selfield

case ucomm.

when '&IC1'.

if selfield-fieldname = 'MATNR'.

read table it_final into wa_final index selfield-tabindex.

if not wa_final-matnr is initial.

set parameter id 'MAT' field wa_final-matnr.

call transaction 'MM02' and skip first screen.

endif.

endcase.

endform.

Re: At user_command is not working

Former Member — Wed, 05 Dec 2012 08:32:05 GMT

Hai Samitha,

First of all you debug it and check whether the system triggering the form or not.

If it is not triggering, means a possible reason is in your display function module you are passing the user command in small letter like 'user_command' it should be in Caps 'USER_COMMAND'.

or try the code as below:

form USER_COMMAND using zucomm like sy-ucomm

selfield type slis_selfield

data : ok_code type sy-ucomm.

ok_code = zucomm.

case ok_code.

when 'MY_SELECTION'.

if selfield-fieldname = 'MATNR'.

read table it_final into wa_final index selfield-tabindex.

if not wa_final-matnr is initial.

set parameter id 'MAT' field wa_final-matnr.

call transaction 'MM02' and skip first screen.

endif.

endcase.

endform.

Thanks,

Anoop S

Re: At user_command is not working

vinoth_aruldass — Wed, 05 Dec 2012 08:45:07 GMT

form USER_COMMAND using ucomm like sy-ucomm selfield type slis_selfield

case ucomm.

when 'MY_SELECTION'.

if selfield-fieldname = 'MATNR'.

read table it_final into wa_final index selfield-tabindex.

if not wa_final-matnr is initial.

set parameter id 'MAT' field wa_final-matnr.

call transaction 'MM02' and skip first screen.

endif.

endcase.

endform.

this will work...

Re: At user_command is not working

Former Member — Wed, 05 Dec 2012 09:27:20 GMT

hi All,

Thank you all for the replies ....

i tried all which is mentioned in the replies, still not working

When i'm trying to debug form is not triggering . please suggest on this .

Regards

Smitha

Re: At user_command is not working

Former Member — Wed, 05 Dec 2012 09:32:04 GMT

Hi,

Check in the FM 'REUSE_ALV_GRID_DISPLAY' whether u given

like this or not

i_callback_user_command = 'USER_COMMAND'

for eg:

CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = i_repid
      is_layout               = gs_layout
      i_callback_user_command = 'USER_COMMAND'
      it_fieldcat             = fieldcatalog[]
      i_save                  = 'X'
    TABLES
      t_outtab                = it_final[]
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.

Re: At user_command is not working

vinoth_aruldass — Wed, 05 Dec 2012 09:39:09 GMT

hi,

i_callback_user_command = 'USER_COMMAND' is given this should work.

form USER_COMMAND using ucomm like sy-ucomm selfield type slis_selfield

case ucomm.

when 'MY_SELECTION'.

if selfield-fieldname = 'MATNR'.

read table it_final into wa_final index selfield-tabindex.

if not wa_final-matnr is initial.

set parameter id 'MAT' field wa_final-matnr.

call transaction 'MM02' and skip first screen.

endif.

endcase.

endform.

Re: At user_command is not working

Former Member — Wed, 05 Dec 2012 09:48:17 GMT

Hi,

I think you are trying to use single click only and expecting to trigger the event but it will not. either use double click or make the matnr field hotspot (for single click).

thanks.

Re: At user_command is not working

basarozgur_kahraman — Wed, 05 Dec 2012 10:00:41 GMT

Hi Smitha,

did you try double click("&IC1") event with hotspot?

if yes, please send your REUSE_ALV call statement and USER_COMMAND method completly.

Re: At user_command is not working

Former Member — Wed, 05 Dec 2012 11:05:09 GMT

Below is my ALV grid and User_command code , i'm using hotspot

FORM DISPLAY_ALV_REPORT .

CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'

EXPORTING

I_CALLBACK_PROGRAM = v_repid

I_CALLBACK_USER_COMMAND = 'USER_COMMAND'

I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'

IS_LAYOUT = fs_layout

IT_FIELDCAT = i_fcat[]

I_DEFAULT = 'X'

I_SAVE = 'A'

TABLES

T_OUTTAB = it_final[]

EXCEPTIONS

PROGRAM_ERROR = 1

OTHERS = 2

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " DISPLAY_ALV_REPORT

data : ok_code type sy-ucomm.

form USER_COMMAND using ucomm like sy-ucomm selfield type slis_selfield .

ok_code = ucomm.

case ok_code.

when '&IC1'.

if selfield-fieldname = 'MATNR'.

read table it_final into wa_final index selfield-tabindex.

* if not wa_final-matnr is initial.

set parameter id 'MAT' field wa_final-matnr.

call transaction 'MM02' and skip first screen.

* endif.

endif.

endcase.

endform.

Re: At user_command is not working

former_member193464 — Wed, 05 Dec 2012 11:15:30 GMT

DATA: v_events TYPE slis_t_event,
wa_event TYPE slis_alv_event.

in initialization event.

call these two performs.

PERFORM event_call.

PERFORM populate_event.

define these form calls in your code

FORM event_call.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = v_events.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "EVENT_CALL

*&--------------------------------------------------------------------*
*&      Form POPULATE_EVENT
*&--------------------------------------------------------------------*
*      Events populated for TOP OF PAGE & USER COMAND
*---------------------------------------------------------------------*
FORM populate_event.
READ TABLE v_events INTO wa_event WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
    wa_event-form = 'TOP_OF_PAGE'.
    MODIFY v_events FROM wa_event TRANSPORTING form WHERE name =
wa_event-form.
ENDIF.

READ TABLE v_events INTO wa_event WITH KEY name = 'USER_COMMAND'.
IF sy-subrc EQ 0.
wa_event-form = 'USER_COMMAND'.
MODIFY v_events FROM wa_event TRANSPORTING form WHERE name =
wa_event-name.
ENDIF.
ENDFORM.

and pass this events table in your ALV display call.. it_events parameters..

Re: At user_command is not working

Former Member — Wed, 05 Dec 2012 11:44:25 GMT

hi ,

Tried as u said ,still facing same issue .

Regards

Smitha

Re: At user_command is not working

former_member193464 — Wed, 05 Dec 2012 11:50:40 GMT

you did passed v_events to it_events in your F.M. right ??

Re: At user_command is not working

former_member193464 — Wed, 05 Dec 2012 11:55:03 GMT

and also pass v_repid = sy-repid. before passing it to your ALV ....

Re: At user_command is not working

basarozgur_kahraman — Wed, 05 Dec 2012 11:55:21 GMT

Hi Smitha,

Are you sure to set v_repid with value of sy-repid before REUSE_ALV call.

DATA: v_repid like sy-repid.

v_repid = sy-repid.

CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'

EXPORTING

I_CALLBACK_PROGRAM = v_repid

I_CALLBACK_USER_COMMAND = 'USER_COMMAND'

I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'

IS_LAYOUT = fs_layout

IT_FIELDCAT = i_fcat[]

I_DEFAULT = 'X'

I_SAVE = 'A'

TABLES

T_OUTTAB = it_final[]

EXCEPTIONS

PROGRAM_ERROR = 1

OTHERS = 2

Re: At user_command is not working

Former Member — Wed, 05 Dec 2012 11:55:37 GMT

Hi,

is double click also not working with &IC1 command?

thanks.

Re: At user_command is not working

Former Member — Thu, 06 Dec 2012 04:05:04 GMT

Do you activating the code before run or not ?

check all objects are activated or not.

Re: At user_command is not working

Former Member — Thu, 06 Dec 2012 04:05:39 GMT

Even double click is not working .