How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN

Former Member — Mon, 26 Nov 2012 11:48:50 GMT

Hi,

How can we create multiple work orders using the bapi BAPI_ALM_ORDER_MAINTAIN.

I am able to create single order perfectly, but when i am uploading the data for multiple orders. I am getting a message into the BAPIRET2 as ''Error reading the order header %00000000001 from the document tables".

Here is the code which i wrote. Please correct me where i am wrong.

Thanks in Advance.

TYPES:BEGIN OF ty_data,
         order_type TYPE aufart,         "Initial Screen
         funct_loc TYPE tplnr,
         equipment TYPE equnr,
         priority TYPE priok,
         planplant TYPE iwerk,
         short_text TYPE auftext,        "Header Data
         activity_type TYPE ila,

         start_date TYPE co_gstrp,

         activity TYPE vornr,
         work_cntr TYPE arbpl,
         plant TYPE werks_d,
         control_key TYPE steus,
         description TYPE ltxa1,
         work_activity TYPE arbeit,
         un_work TYPE arbeite,
         number TYPE anzkap,

         activity_c TYPE aposn,"vornr,
         material TYPE matnr,
         req_qty TYPE co_menge,
         uom TYPE meins,
         item_cat TYPE postp,
   END OF ty_data.
*        finish_date TYPE co_gltrp,

DATA:t_data TYPE TABLE OF ty_data,
      w_data TYPE ty_data.

DATA:t_header TYPE TABLE OF bapi_alm_order_headers_i,
      w_header TYPE bapi_alm_order_headers_i.

DATA:t_operation TYPE TABLE OF bapi_alm_order_operation,
      w_operation TYPE bapi_alm_order_operation.

DATA:t_component TYPE TABLE OF bapi_alm_order_component,
      w_component TYPE bapi_alm_order_component.

DATA:t_methods TYPE TABLE OF bapi_alm_order_method,
      w_methods TYPE bapi_alm_order_method.

DATA:w_return TYPE bapiret2,
      t_return TYPE TABLE OF bapiret2.

DATA:w_number TYPE bapi_alm_numbers,
      t_number TYPE TABLE OF bapi_alm_numbers.

DATA:order TYPE aufnr.

DATA:w_loc TYPE tplnr.

DATA:w_matnr TYPE matnr.

DATA:w_equi TYPE equnr.

DATA:refno TYPE n LENGTH 6 VALUE '000001'.
DATA:seqno TYPE n LENGTH 11 VALUE '00000000001'.

***********************************************************************************

*DATA:path TYPE string.
*
*PARAMETERS:w_path TYPE ibipparms-path.
*
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR w_path.
* CALL FUNCTION 'F4_FILENAME'
*    EXPORTING
*      program_name = syst-cprog
*      dynpro_number = syst-dynnr
**     FIELD_NAME    = ' '
*    IMPORTING
*      file_name     = w_path.
*
*AT SELECTION-SCREEN.
* path = w_path.
*
*START-OF-SELECTION.
* path = w_path.
CALL FUNCTION 'GUI_UPLOAD'
   EXPORTING
     filename                      = '_______'
    filetype                      = 'DAT'
   TABLES
     data_tab                      = t_data

************************** Filling the internal Table ****************************************
DATA:key TYPE c LENGTH 12.

LOOP AT t_data INTO w_data.

   CONCATENATE '%' seqno INTO key.

   w_methods-refnumber = refno.
   w_methods-objecttype = 'HEADER'.
   w_methods-method = 'CREATE'.
   w_methods-objectkey = key."'%00000000001'.
   APPEND w_methods TO t_methods.
   CLEAR w_methods.

   CALL FUNCTION 'CONVERSION_EXIT_TPLNR_INPUT'
     EXPORTING
       input                = w_data-funct_loc
       i_flg_check_internal = 'X'
     IMPORTING
       output               = w_loc
     EXCEPTIONS
       not_found            = 1
       OTHERS               = 2.

   CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
     EXPORTING
       input = w_data-equipment
     IMPORTING
       output = w_equi.

**************************************************************************************************

   w_header-orderid = key."'%00000000001'.
   w_header-order_type = w_data-order_type.                  "'PM01'.
   w_header-planplant = w_data-planplant.                   "'1000'."
   w_header-funct_loc = w_loc.
   w_header-equipment = w_equi."w_data-equipment.

   w_header-short_text = w_data-short_text. "'test'.
   w_header-start_date = w_data-start_date. "SY-DATUM
   APPEND w_header TO t_header.

******************************************************************************************************

   w_methods-refnumber = refno.                              "'000001'.
   w_methods-objecttype = 'OPERATION'.
   w_methods-method = 'CREATE'.
   w_methods-objectkey = key."'%000000000010010'.
   APPEND w_methods TO t_methods.
   CLEAR w_methods.

******************************************************************************************************

   w_operation-activity = w_data-activity .                  "0010
   w_operation-work_cntr = w_data-work_cntr.           "'MECHANIK'.
   w_operation-plant = w_data-plant.                        "1000
   w_operation-description = w_data-description.       "TEST
   w_operation-control_key = w_data-control_key.             "PM01

   w_operation-work_activity = w_data-work_activity.   "2
   w_operation-un_work = w_data-un_work .              "H
   w_operation-number_of_capacities = w_data-number.   "1
   APPEND w_operation TO t_operation.

*********************************************************************************************

   CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
     EXPORTING
       input        = w_data-material
     IMPORTING
       output       = w_matnr
     EXCEPTIONS
       length_error = 1
       OTHERS       = 2.

*********************************************************************************************

   w_methods-refnumber = refno.                              "'000001'.
   w_methods-objecttype = 'COMPONENT'.
   w_methods-method = 'CREATE'.
   w_methods-objectkey = key."'%00000000001'.
   APPEND w_methods TO t_methods.
   CLEAR w_methods.

*********************************************************************************************

   w_component-activity = w_data-activity_c.                 "'0010'.
   w_component-material = w_matnr.
   w_component-requirement_quantity = w_data-req_qty.    "2
   w_component-requirement_quantity_unit = w_data-uom.   "M3
   w_component-item_cat = w_data-item_cat.               "L
   APPEND w_component TO t_component.

*********************************************************************************************

w_methods-refnumber = refno."'000001'.
w_methods-objecttype = ''.
w_methods-method = 'SAVE'.
w_methods-objectkey = key."'%00000000001'.
APPEND w_methods TO t_methods.
CLEAR w_methods.

*********************************************************************************************
   ADD 1 TO seqno.
   ADD 1 TO refno.
   clear w_component.
   clear w_operation.
   clear w_header.

ENDLOOP.

CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
   TABLES
     it_methods                  = t_methods
     it_header                   = t_header
     it_operation                = t_operation
     it_component                = t_component
     return                      = t_return
     et_numbers                  = t_number
.

CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait          = 'X'
* IMPORTING
*   RETURN        = t_return
           .

Re: How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN

Former Member — Wed, 09 Jan 2013 12:59:42 GMT

Hi Shravan,

Please include the 'BAPI_ALM_ORDER_MAINTAIN' & BAPI_TRANSACTION_COMMIT inside the loop for creating multiple work orders.

Thanks,

Tooshar Bendale

Re: How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN

RaymondGiuseppi — Wed, 09 Jan 2013 13:18:16 GMT

Perform a call to BAPI and COMMIT at change of order, don't forget to refresh required internal tables before creating next order. Analyze RETURN parameter before commit.

Regards,

Raymond

Re: How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN

Former Member — Thu, 10 Jan 2013 04:51:23 GMT

Hi Tooshar Bendale,

I know that to keep that in a loop. my question is why this header is in tables as there will be single entry for one order. Anyways thanks for your reply but i finished this long time ago.

Re: How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN

Former Member — Thu, 10 Jan 2013 05:33:20 GMT

Hi Shravan,

For mass uploading purpose "HEADER" is available in Tables.

take Example of Material Master .

if you Create/Change a Material using "BAPAI_MATERIAL_SAVEDATA" , here operation is 1:1 ration so "HEADER" is available in Import Parameter.

but when u go for Mass Uploading then we use "BAPI_MATERIAL_SAVEREPLICA " , here Many:Many ration so "HEADER" is available in Tables .

Regard's

Smruti

topic How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN in Application Development and Automation Discussions

How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN

Re: How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN

Re: How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN

Re: How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN

Re: How to create multiple orders using BAPI_ALM_ORDER_MAINTAIN