Fetching value from input field without giving enter

Former Member — Wed, 21 Nov 2012 08:46:29 GMT

Hi Experts,

Scenario: I have two input fields A and B (Module Pool program).

Based on the value of input field B that I have selected by using F4 or writing, I have to fetch the value of input field A.

Requirement: Under the POV when I am feching the value of input field B after selecting it, I have found no value but when i am giving enter after selecting or writing the value, I am getting the value.

My requirement is to fetch the value when I am writing or selecting the value by using F4 without giving the enter.

Re: Fetching value from input field without giving enter

kesavadas_thekkillath — Wed, 21 Nov 2012 08:52:24 GMT

Use DYNP_VALUES_UPDATE in the event and update field A. Search for more details.

Un-marking as question due to basic nature.

Re: Fetching value from input field without giving enter

Former Member — Wed, 21 Nov 2012 08:57:00 GMT

Hello Suman,

Use FM DYNP_VALUES_READ to read values from selection screen.

For ex :

refresh s_kunnr.
CLEAR: lw_dyfields.
lw_dyfields-fieldname = 'S_KUNNR-LOW'.
APPEND lw_dyfields TO lt_dyfields.

CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
TABLES

dynpfields = lt_dyfields.

You will get field value in table lt_dyfields.

Regards,

Deepti

Re: Fetching value from input field without giving enter

gouravkumar64 — Wed, 21 Nov 2012 09:01:14 GMT

Hi,

Almost same scenario I have,in one EHS DEVELOPEMENT.

but not in Module pool.

u can try like

1)within one perform(subroutine)

DATA: BEGIN OF it_person_id OCCURS 0,
               person_id TYPE t7ehs00_mappernr-person_id,
END OF it_person_id.

   DATA : wa_person_id LIKE LINE OF it_person_id.

   SELECT DISTINCT person_id FROM t7ehs00_mappernr
     INTO CORRESPONDING FIELDS OF TABLE it_person_id.

   CLEAR it_person_id .

   SORT it_person_id BY person_id.

   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
     EXPORTING
       retfield        = 'P_ID'
       dynpprog        = sy-cprog
       dynpnr          = sy-dynnr
       dynprofield     = 'P_ID'
       value_org       = 'S'
       display         = 'F'
     TABLES
       value_tab       = it_person_id
*     FIELD_TAB       =
       return_tab      = it_return1
*     DYNPFLD_MAPPING =
     EXCEPTIONS
       parameter_error = 1
       no_values_found = 2
       OTHERS          = 3.
   IF sy-subrc <> 0.
* Implement suitable error handling here
   ENDIF.
   p_id = it_return1-fieldval.

2)after that,

based on previous value i used ONE fm

CALL FUNCTION 'DYNP_VALUES_READ' for that

my code was

DATA : BEGIN OF it_srv_number OCCURS 0,
                srv_number TYPE t7ehs00_service-srv_number,
   END OF it_srv_number.

   DATA: it_srv_number1 LIKE TABLE OF it_srv_number.

   DATA: BEGIN OF it_intpernr OCCURS 0,
                 intpernr TYPE t7ehs00_mappernr-intpernr,
                 person_id TYPE t7ehs00_mappernr-person_id,
   END OF it_intpernr.

   DATA : wa_intpernr LIKE LINE OF it_intpernr.
   DATA : lv_fieldvalue TYPE dynfieldvalue,
         lwa_dynpread TYPE dynpread,
         lt_dynpread TYPE TABLE OF dynpread.

   lwa_dynpread-fieldname = 'FORMO'.

   APPEND lwa_dynpread TO lt_dynpread.

   lwa_dynpread-fieldname = 'VISION'.
   APPEND lwa_dynpread TO lt_dynpread.

   lwa_dynpread-fieldname = 'STOOL'.
   APPEND lwa_dynpread TO lt_dynpread.

   lwa_dynpread-fieldname = 'P_ID'.
   APPEND lwa_dynpread TO lt_dynpread.

   CALL FUNCTION 'DYNP_VALUES_READ'
     EXPORTING
       dyname               = sy-repid
       dynumb               = sy-dynnr
     TABLES
       dynpfields           = lt_dynpread
     EXCEPTIONS
       invalid_abapworkarea = 1
       invalid_dynprofield = 2
       invalid_dynproname   = 3
       invalid_dynpronummer = 4
       invalid_request      = 5
       no_fielddescription = 6
       invalid_parameter    = 7
       undefind_error       = 8
       double_conversion    = 9
       stepl_not_found      = 10
       OTHERS               = 11.
   IF sy-subrc IS INITIAL.
     CLEAR : lwa_dynpread.
     READ TABLE lt_dynpread INTO lwa_dynpread WITH KEY fieldname = 'P_ID'.
     p_id = lwa_dynpread-fieldvalue.

     READ TABLE lt_dynpread INTO lwa_dynpread WITH KEY fieldname = 'FORMO'.
     formo = lwa_dynpread-fieldvalue.
     IF formo NE 'X'.
       READ TABLE lt_dynpread INTO lwa_dynpread WITH KEY fieldname = 'VISION'.
       vision = lwa_dynpread-fieldvalue.
       IF vision NE 'X'.
         READ TABLE lt_dynpread INTO lwa_dynpread WITH KEY fieldname = 'STOOL'.
         stool = lwa_dynpread-fieldvalue.
       ENDIF.
     ENDIF.
   ENDIF.

   CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
     EXPORTING
       input = p_id
     IMPORTING
       output = p_id.
   IF formo = 'X'.

     SELECT srv_number FROM t7ehs00_srv_prot
          INTO TABLE it_srv_number1
             WHERE pnumber = 'IME'
               OR pnumber = 'PM1'
               OR pnumber = 'PM2'
               or pnumber = 'PM3'.
   ELSEIF vision = 'X'.
     SELECT srv_number FROM t7ehs00_srv_prot
      INTO TABLE it_srv_number1
         WHERE pnumber = 'VT'.
   ELSEIF stool = 'X'.
     SELECT srv_number FROM t7ehs00_srv_prot
        INTO TABLE it_srv_number1
           WHERE pnumber = 'ST'.
   ENDIF.

   SELECT SINGLE intpernr person_id FROM t7ehs00_mappernr
     INTO wa_intpernr
     WHERE person_id = p_id.
if it_srv_number1[] is not INITIAL.
   SELECT DISTINCT srv_number FROM t7ehs00_service
     INTO TABLE it_srv_number
     for all ENTRIES IN it_srv_number1
     WHERE srv_number = it_srv_number1-srv_number
     and pernr = wa_intpernr-intpernr.
endif.
   CLEAR it_srv_number .

   SORT it_srv_number BY srv_number.

   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
     EXPORTING
       retfield        = 'P_NUMBER'
       dynpprog        = sy-cprog
       dynpnr          = sy-dynnr
       dynprofield     = 'P_NUMBER'
       value_org       = 'S'
       display         = 'F'
     TABLES
       value_tab       = it_srv_number
**   FIELD_TAB              =
       return_tab      = it_return2
**   DYNPFLD_MAPPING        =
     EXCEPTIONS
       parameter_error = 1
       no_values_found = 2
       OTHERS          = 3.
   IF sy-subrc <> 0.
* Implement suitable error handling here
   ENDIF.

Hope it helpful for You.

Thanks

Gourav.

Re: Fetching value from input field without giving enter

Former Member — Wed, 21 Nov 2012 11:30:53 GMT

Thanks Deepti

Re: Fetching value from input field without giving enter

Former Member — Wed, 21 Nov 2012 11:54:09 GMT

Thanks Kesavadas .

topic Re: Fetching value from input field without giving enter in Application Development and Automation Discussions

Fetching value from input field without giving enter

Re: Fetching value from input field without giving enter

Re: Fetching value from input field without giving enter

Re: Fetching value from input field without giving enter

Re: Fetching value from input field without giving enter

Re: Fetching value from input field without giving enter