topic Re: problem in smartform print preview in Application Development and Automation Discussions

problem in smartform print preview

Former Member — Fri, 28 Sep 2012 15:05:32 GMT

Dear Abap ers,

i want to print preview by default with out displaying any pop up page and also i choose a printer name by default.....

CODE:

REPORT ZSMARTFORM_IMP1.

TABLES:vbak.

select-OPTIONS: s_vbeln for vbak-vbeln.

DATA: it_vbak TYPE STANDARD TABLE OF vbak INITIAL SIZE 0,
       it_vbap TYPE STANDARD TABLE OF vbap INITIAL SIZE 0,

       it_vbak_temp TYPE STANDARD TABLE OF vbak INITIAL SIZE 0,
       it_vbap_temp TYPE STANDARD TABLE OF vbap INITIAL SIZE 0,

       wa_vbak TYPE vbak,

FM_NAME TYPE rs38l_fnam.

data: output_options type ssfcompop.

DATA: CONTROL TYPE SSFCTRLOP.

SELECT * from vbak into TABLE it_vbak WHERE VBELN IN S_VBELN .

if sy-subrc EQ 0.

   select * from vbap INTO TABLE it_vbap FOR ALL ENTRIES IN it_vbak
   WHERE vbeln = it_vbak-vbeln.

endif.

output_options-tddest = 'LP01'.        (LP01 = PRINTER NAME)
output_options-tdNOPRINT = 'X'.
CONTROL-DEVICE = 'PRINTER'.
CONTROL-NO_DIALOG = 'X'.
*** CONTROL-NO_OPEN = 'X'.
*** CONTROL-NO_CLOSE = 'X'.
CONTROL-PREVIEW = ' '.

CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
   EXPORTING
     FORMNAME                 = 'ZSMARTFORM_IMP1'
*   VARIANT                  = ' '
*   DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                   = FM_NAME
* EXCEPTIONS
*   NO_FORM                  = 1
*   NO_FUNCTION_MODULE       = 2
*   OTHERS                   = 3
           .
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

loop at it_vbak into wa_vbak.

   refresh:it_vbak_temp,
           it_vbap_temp.

   it_vbak_temp[] = it_vbak[].
   it_vbap_temp[] = it_vbap[].

   DELETE it_vbak_temp WHERE vbeln NE wa_vbak-vbeln.
   DELETE it_vbap_temp WHERE vbeln NE wa_vbak-vbeln.

   CALL FUNCTION FM_NAME
EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         = CONTROL
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
    OUTPUT_OPTIONS             = OUTPUT_OPTIONS
*   USER_SETTINGS              = ' '
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
     TABLES
       VBAK                       = it_vbak_temp[]
       VBAP                       = it_vbap_temp[]
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5
             .
   IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.

endlooP.

After execute this code a critical error message will display -
"Output device LOCL not defined".

i cant understand what is my problem..... please solve it and if any wrong in coding then please correct it.

Regards

Sabyasachi Karforma

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 15:15:11 GMT

HI,

change ur printer name from

output_options-tddest = 'LP01'. (LP01 = PRINTER NAME)

output_options-tddest = 'LOCL'.

(LOCL = PRINTER NAME)

I think your poutput is configured with locl printer check in nace also.

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 15:42:35 GMT

HI Geeta according to you i change output_options-tddest = 'LOCL'. But same problem.

Error = "Output device LOCL not defined" and it terminates the current transaction. please solve. output_options and control parameters which is defined in my code is it right and enough to get my required output?

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:03:43 GMT

CONTROL-DEVICE = 'PRINTER'.

try with commenting this type.

and debug the fm_name.

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:17:08 GMT

output_options-tddest = '$LOCL'.

output_options-tdNOPRINT = 'X'.

CONTROL-NO_DIALOG = 'X'.

CONTROL-PREVIEW = ' '.

only this 4 are enough for my required output???

regards

Sabyasachi

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:17:40 GMT

output_options-tddest = 'LOCL'.

output_options-tdNOPRINT = 'X'.

CONTROL-NO_DIALOG = 'X'.

CONTROL-PREVIEW = ' '.

only this 4 are enough for my required output???

regards

Sabyasachi

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:18:28 GMT

also try with removing comment. * USER_SETTINGS = ' ' to

USER_SETTINGS = ' '

in ur FM_NAME fm

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:22:55 GMT

control-preview = 'X'."Preview the output of Smartform

control-no_dialog = 'X'."Don't show Dialog

output_options-tddest = 'LOCL'."Spool: Output device

output_options-tdnoprint = 'X'."No printing from print preview

i think this much is enough to solve your issue

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:27:48 GMT

one more .

why are your defining ur FM_NAME inside loop endloop. loop at it_vbak into wa_vbak.endloop.

get all data first and call FM_NAME.

also uncomments USER_SETTING = '' fropm FM_NAME.

and try hope it wll work.

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:39:02 GMT

HI GEETA,

output_options-tddest = 'LP01'.

output_options-tdNOPRINT = 'X'.

CONTROL-NO_DIALOG = 'X'.

CONTROL-PREVIEW = ' '.

CALL FUNCTION FM_NAME
EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         = CONTROL
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
    OUTPUT_OPTIONS             = OUTPUT_OPTIONS
    USER_SETTINGS              = '   '
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
     TABLES
       VBAK                       = it_vbak_temp[]
       VBAP                       = it_vbap_temp[]
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5
             .
   IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.

NOW IS IT CORRECT TO AVOID POP UP PAGE AND CHOOSE A PRINTER NAME BY DEFAULT???

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:45:10 GMT

HI,

can you please try with this and let me know.

and also try with print_preview = 'X'

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:49:09 GMT

If you dont get then try with sample programs from below link.

http://wiki.sdn.sap.com/wiki/display/Snippets/Smartform+-+How+to+avoid+the+dialog+box+or+smartform+output+without+print+dialog+window

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:52:24 GMT

hi geeta,

now this code does not produce any error but this code is not executed....

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 16:55:26 GMT

debug ur driver program and check if u r getting data in itab . and send me your updated code if you have no problem.

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 17:41:46 GMT

HI geeta,

i send my code to your gmail. please chek it and also some questions regarding this, please answer it....

Re: problem in smartform print preview

Former Member — Fri, 28 Sep 2012 21:54:39 GMT

HI Sabyasachi,

I have not received your email in my gmail. Good that your issue get solved. you can ask any question. I will try my best.

Regards,

Geeta