topic Re: error in uploading data. in Application Development and Automation Discussions

error in uploading data.

santosh_kumar94 — Wed, 10 Oct 2012 14:45:39 GMT

Dear experts,

i want to upload data to tcode mb1b . i am able to upload data to it's 2 screens but the 3rd screen is not taking the data.

it's showing error like field mseg-kdpos doesn't exits in the screen 0002 .

here is my recording :

     PERFORM BDC_DYNPRO      USING 'SAPMM07M' '0400'.
     PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'RM07M-SOBKZ'.
     PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '/00'.
     PERFORM BDC_FIELD       USING 'MKPF-BLDAT'
                                   '27.09.2012'.
     PERFORM BDC_FIELD       USING 'MKPF-BUDAT'
                                   '27.09.2012'.
     PERFORM BDC_FIELD       USING 'RM07M-BWARTWA'
                                   WA-BWARTWA .               " '413'.
     PERFORM BDC_FIELD       USING 'RM07M-SOBKZ'
                                   WA-SOBKZ.         "'E'.
     PERFORM BDC_FIELD       USING 'RM07M-WERKS'
                                   WA-WERKS.                    "   'CH01'.
     PERFORM BDC_FIELD       USING 'RM07M-LGORT'
                                   WA-LGORT .                 " '5001'.
     PERFORM BDC_FIELD       USING 'XFULL'
                                   'X'.
     PERFORM BDC_FIELD       USING 'RM07M-WVERS2'
                                   'X'.

*
     PERFORM BDC_DYNPRO      USING 'SAPMM07M' '0421'.
     PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'MSEG-CHARG(01)'.
     PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '/00'.
     PERFORM BDC_FIELD       USING 'MSEGK-UMLGO'
                                  WA-UMLGO .                 " '5001'.
     PERFORM BDC_FIELD       USING 'MSEGK-UMMAT'
                                  WA-UMMAT .                 " 'san100'.
     PERFORM BDC_FIELD       USING 'MSEG-MATNR(01)'
                                  WA-MATNR .                 " 'san90'.

    PERFORM BDC_FIELD       USING 'MSEG-ERFMG(01)'
                                   LV_CHAR .               "'2'.
     PERFORM BDC_FIELD       USING 'MSEG-ERFME(01)'
                                   WA-ERFME .              " 'kg'.
     PERFORM BDC_FIELD       USING 'MSEG-CHARG(01)'
                                   WA-CHARG .                "'1563'.
     PERFORM BDC_FIELD       USING 'MSEGK-MAT_KDAUF'
                                   WA-MAT_KDAUF .        "'500000026'.
     PERFORM BDC_FIELD       USING 'MSEGK-MAT_KDPOS'
                                   WA-MAT_KDPOS             . " '10'.
     PERFORM BDC_FIELD       USING 'DKACB-FMORE'
                                  'X'.

perform bdc_dynpro      using 'SAPLKACB' '0002'.
perform bdc_field       using 'BDC_OKCODE'
                               '=ENTE'.
perform bdc_field       using 'BDC_CURSOR'
                               'MSEG-KDPOS'.
perform bdc_field       using 'MSEG-KDAUF'
                               WA-KDAUF.
perform bdc_field       using 'MSEG-KDPOS'
                                  WA-KDPOS.

perform bdc_field       using 'DKACB-FMORE'
                             LV_FNAM.                       " record-FMORE_020.
perform bdc_dynpro      using 'SAPLKACB' '0002'.
perform bdc_field       using 'BDC_OKCODE'
                               '=ENTE'.
perform bdc_dynpro      using 'SAPMM07M' '0421'.
perform bdc_field       using 'BDC_CURSOR'
                               'MSEG-ERFMG(01)'.
perform bdc_field       using 'BDC_OKCODE'.

plz help.

Re: error in uploading data.

MariaJooRocha — Wed, 10 Oct 2012 16:05:30 GMT

Hi,

Do you know TC SHDB?

Regards,

Maria João Rocha

Re: error in uploading data.

sandeep_katoch — Wed, 10 Oct 2012 16:34:43 GMT

hi santosh,

Try to execute the program in foreground mode by passing the mode as A which will start the program in foreground.

You can consequently check where and on which field and which screen the error is appearing.

By just seeing the recording it is quiet difficult to answer.

Rgds,

Sandeep Katoch

Re: error in uploading data.

Former Member — Wed, 10 Oct 2012 17:17:46 GMT

hello,

Why don't you try the BAPI "BAPI_GOODSMVT_CREATE" ? this is good approach and you won't have issues if there is an upgrade in your system. BDC is an old method and needs to be avoided if there is a FM or BAPI to do the sam job.

best regards,

swanand

Re: error in uploading data.

santosh_kumar94 — Thu, 11 Oct 2012 04:39:03 GMT

dear sir,

you can see in my recording that whereever i am passing the work area value it's taking the data but from here it's not updating the data.

this screen is showing error that mseg-kdpos doesn't exit's in the screen. here wa-kdauf & wa-kdpos is not updating the data.

perform bdc_dynpro      using 'SAPLKACB' '0002'.
perform bdc_field       using 'BDC_OKCODE'
                               '=ENTE'.
perform bdc_field       using 'BDC_CURSOR'
                               'MSEG-KDPOS'.
perform bdc_field       using 'MSEG-KDAUF'
                               WA-KDAUF.
perform bdc_field       using 'MSEG-KDPOS'
                                  WA-KDPOS.

perform bdc_field using 'DKACB-FMORE'
LV_FNAM.

Re: error in uploading data.

santosh_kumar94 — Thu, 11 Oct 2012 04:49:21 GMT

hi ,

yes i know tc shdb. i have used it for recording mb1b .

Re: error in uploading data.

santosh_kumar94 — Thu, 11 Oct 2012 04:58:03 GMT

but i have to do it using bdc.

thanks.

Re: error in uploading data.

naresh_bammidi — Thu, 11 Oct 2012 05:00:30 GMT

Hi,

The error saying that,in the screen '0002' the field is does not exist.Double check the screen number or record it again.

Thanks

Naresh

Re: error in uploading data.

sandeep_katoch — Thu, 11 Oct 2012 05:33:28 GMT

Hi Santosh,

Please cross check once again because in 'SAPLKACB' '0002' these two fields are not there.

Cross check once again and try to do the recording and check whether the given fields exists in the screen or not.

Why dont you try the debugging in foreground mode because then you will be on the screen itself where it is trying to find the fields.

Rgds,

Sandeep Katoch

Re: error in uploading data.

santosh_kumar94 — Thu, 11 Oct 2012 05:57:47 GMT

dear sir,

i am using movement type - 413. for this movement type it's showing these two fields. again i have recorded . same things are again coming in the recording. Also, i have debugged it in A- mode . so, for these two fields data is not updating.

thanks.

Re: error in uploading data.

Former Member — Thu, 11 Oct 2012 15:38:54 GMT

Hi,

Well, too bad that you have to do it by using an obsolete method...I really cannot understand that

Moreover, many transactions behave differently when processed in background and, often, a simple recording won't allow an easy background processing...

Anyway when looking at that screen, I can only find COBL-MAT_KDAUF with COBL-MAT_KDPOS or COBL-KDAUF with COBL-KDPOS... Maybe you can try it out by using those fields instead.

But the good way of doing that is by using the correct Bapi.... anything else looks like a mess to me

Cheers,

Manu.

Re: error in uploading data.

Former Member — Thu, 11 Oct 2012 18:02:16 GMT

BDC should be the LAST possible choice, after all other methods (particularly SAP-written BAPIs) have been exhaused.