topic Re: cor6n error in Application Development and Automation Discussions

cor6n error

Former Member — Tue, 26 Jun 2012 09:58:40 GMT

hi ,

how to find the error for this bapi BAPI_PROCORDCONF_CREATE_TT , because if i do a entry in cor6n for particular order id it is in error like 'enter the

storage location' , i knw tht ,tht order id is in error, but if i pass the same order id in BAPI , its not showing the error (i.e. enter the storage location ) simply its showing confirmation of order ID and in table detail_return, so pls help me out in this

Re: cor6n error

yogendra_bhaskar — Tue, 26 Jun 2012 10:36:33 GMT

hi saravanan ,

Have you check the table affw or check through t-code cogi.

regards ,

Yogendra Bhaskar

Re: cor6n error

laurent_fournier2 — Tue, 26 Jun 2012 11:23:14 GMT

Hi,

can you please share how you are filling tha bapi interface ?

Re: cor6n error

Former Member — Tue, 26 Jun 2012 12:01:05 GMT

hi tanx for reply,

once i save tht movement type its showing error in tcode cor6n, but if i am passing the same data to the bapi but its showing 'confirmation of order xxxx saved' in detail_return , i want to capture the exact error of tht order id , how could i do tht , pls help ant its too urgent .am i passing orderid ,phase,posting date, yield thts it .

Re: cor6n error

yogendra_bhaskar — Tue, 26 Jun 2012 12:09:58 GMT

hi ,

R u not passing any data in table of goodsmovements ?

The storage location is passed in the GM table .

Re: cor6n error

Former Member — Tue, 26 Jun 2012 12:30:22 GMT

hi, i have seen tht cogi in tht all the error mess are thr but how could i take tht one, because its all structure , thts is belong to which table tell me

Re: cor6n error

Former Member — Tue, 26 Jun 2012 12:32:01 GMT

even if i pass the material no, storage location , plant , its not gathering the error in detail_return table.but in COGI t.code all the error is thr in the field 'error text' , but i dont how to get the error from thr

. so just tell me where tht error is storing table

Re: cor6n error

Former Member — Tue, 26 Jun 2012 12:36:06 GMT

hi , just am passing orderid, phase, posting date, yields to bapi , but i am worng mess in bapi , if i see tht order id in COGI tcode its showing tht correct error , so to how to get the error mess correctly in bapi

Re: cor6n error

yogendra_bhaskar — Tue, 26 Jun 2012 12:51:24 GMT

hi ,

this bapi is meant to collect the error and post it in table affw and which u can see through COGI .

Now , first of all if you can stop the error to be posted in cogi ; you can obtain the error during confirmation itself.

I tried a lot , but didn't got any way to stop the error to be posted in cogi.

Whereas I have an alternate solution to this problem :

Before executing the bapi BAPI_PROCORDCONF_CREATE_TT.

You can use BAPI_GOODSMVT_CREATE , but run it in TEST MODE i.e pass

testrun = 'X' .

Now , pass the Goods movement data also .

you will have your error.

Regards ,

Yogendra Bhaskar

Re: cor6n error

yogendra_bhaskar — Tue, 26 Jun 2012 12:54:44 GMT

hi ,

this bapi is meant to collect the error and post it in table affw and which u can see through COGI .

Now , first of all if you can stop the error to be posted in cogi ; you can obtain the error during confirmation itself.

I tried a lot , but didn't got any way to stop the error to be posted in cogi.

Whereas I have an alternate solution to this problem :

Before executing the bapi BAPI_PROCORDCONF_CREATE_TT.

You can use BAPI_GOODSMVT_CREATE , but run it in TEST MODE i.e pass

testrun = 'X' .

Now , pass the Goods movement data also .

you will have your error.

Regards ,

Yogendra Bhaskar

Re: cor6n error

yogendra_bhaskar — Thu, 28 Jun 2012 05:33:46 GMT

Hi Saravanan Velu ,

have you got the solution for your problem or still facing it ?

If you have got any alternate solution other than what I have told u , Plz. inform me about it.

Thanx and Regards ,

Yogendra Bhaskar

Re: cor6n error

Former Member — Thu, 28 Jun 2012 06:22:08 GMT

hi yogendra,

still i ahve problem in tht bapi , so i have done tht in

bdc ,now i can capture all the errors in tht, but now one problem raised in tht , say for example if one order id is error ok, if i upload tht through bdc i got error also it storing in standard table , tell me how to rectify it

if order id is error i dont want to upload it .

my program.

   REPORT zmsc_cor6n_bdc
       NO STANDARD PAGE HEADING LINE-SIZE 255.
*********************************************************************
*& Program           : ZMSC_BDC_001
*& Module            : PP
*& Sub-Module        : PP
*& Functional Contact: Mr.
*& Developer(Company): Mr.Saravanan
*& Create Date       : 27th Jun 2012
*& Program Type      : Exec
*& Description       : BDC
*********************************************************************
*&---------------------------------------------------------------------*
*&
*&Types Declaration
*&---------------------------------------------------------------------*
TYPES : BEGIN OF ty_data,
         aufnr_001(012),
         vornr_002(014),
         lmnga_003(004),
         meinh_004(003),
         budat_005(010),
         err_msg(73) TYPE c,
       END OF ty_data.
*&---------------------------------------------------------------------*
*&
*&Internal Table and Workarea Declaration
*&---------------------------------------------------------------------*
DATA : it_data TYPE TABLE OF ty_data,
       wa_data TYPE ty_data,
       it_data1 TYPE TABLE OF ty_data,
       wa_data1 TYPE ty_data,
       it_error TYPE TABLE OF ty_data,
       wa_error TYPE ty_data,
       it_success TYPE TABLE OF ty_data,
       wa_success TYPE ty_data.

*Used to store BDC data
DATA : BEGIN OF gt_bdc_tab OCCURS 0.
        INCLUDE STRUCTURE bdcdata.
DATA : END OF gt_bdc_tab.

*Used to stores error information from CALL TRANSACTION Function Module
DATA : gt_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE .
*include bdcrecx1.
DATA: gv_textout     TYPE t100-text,
      gv_mode        TYPE mode,
      gv_update      TYPE update.

*&---------------------------------------------------------------------*
*&
*&SELECTION-SCREEN
*&---------------------------------------------------------------------*

SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME
                                    TITLE text-001.
PARAMETERS: p_file   TYPE rlgrap-filename OBLIGATORY.

SELECTION-SCREEN END OF BLOCK block1.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'P_FILE'
    IMPORTING
      file_name     = p_file.

*&---------------------------------------------------------------------*
*&
*&START-OF-SELECTION
*&---------------------------------------------------------------------*
START-OF-SELECTION.
* include zfrun.
* perform authority_check.
PERFORM get_data.
PERFORM update_data.
PERFORM disp_success.
PERFORM disp_error.

*&---------------------------------------------------------------------*
*&      Form GET_DATA
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
* --> p1        text
* <-- p2        text
*----------------------------------------------------------------------*
FORM get_data .

DATA : lv_fname TYPE string.

lv_fname = p_file.

CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = lv_fname
      filetype                = 'ASC'
      has_field_separator     = 'X'
    TABLES
      data_tab                = it_data
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
it_data1 = it_data.
REFRESH it_data.
LOOP AT it_data1 INTO wa_data1.

    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = wa_data1-aufnr_001
      IMPORTING
        output = wa_data-aufnr_001.

    wa_data-vornr_002 = wa_data1-vornr_002.
    wa_data-lmnga_003 = wa_data1-lmnga_003.
    wa_data-meinh_004 = wa_data1-meinh_004.
    wa_data-budat_005 = wa_data1-budat_005.
    APPEND wa_data TO it_data .

ENDLOOP.

ENDFORM.                    " GET_DATA

*&---------------------------------------------------------------------*
*&      Form UPDATE_DATA
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
* --> p1        text
* <-- p2        text
*----------------------------------------------------------------------*
FORM update_data .

*perform open_group.
gv_mode   = 'N'.
gv_update = 'S'.

LOOP AT it_data INTO wa_data.

    PERFORM bdc_dynpro USING:     'X' 'SAPLCORU_S' '5100',
                                  ' ' 'BDC_OKCODE' '/00' ,
                                  ' ' 'AFRUD-AUFNR' wa_data-aufnr_001,
                                  ' ' 'AFRUD-VORNR' wa_data-vornr_002,
                                  ' ' 'AFRUD-LMNGA' wa_data-lmnga_003,
                                  ' ' 'AFRUD-MEINH' wa_data-meinh_004,
                                  ' ' 'AFRUD-ISDZ' '00:00:00',
                                  ' ' 'AFRUD-IEDZ' '00:00:00',
                                  ' ' 'AFRUD-PEDZ' '00:00:00',
                                  ' ' 'BDC_CURSOR' 'AFRUD-BUDAT',
                                  ' ' 'AFRUD-BUDAT' wa_data-budat_005,
                                  'X' 'SAPLCORU_S' '5100',
                                  ' ' 'BDC_OKCODE' '=MB03',
                                  ' ' 'AFRUD-AUFNR' wa_data-aufnr_001,
                                  ' ' 'AFRUD-VORNR' wa_data-vornr_002,

                                  ' ' 'BDC_CURSOR' 'AFRUD-LMNGA',
                                  ' ' 'AFRUD-LMNGA' wa_data-lmnga_003,
                                  ' ' 'AFRUD-MEINH' wa_data-meinh_004,
                                  ' ' 'AFRUD-ISM01' ' ',
                                  ' ' 'AFRUD-ILE01' ' ',
                                  ' ' 'AFRUD-ISDZ' '00:00:00',
                                  ' ' 'AFRUD-IEDZ' '00:00:00',
                                  ' ' 'AFRUD-PEDZ' '00:00:00',
                                  ' ' 'AFRUD-BUDAT' '',
                                  'X' 'SAPLCOWB' '0130',
                                  ' ' 'BDC_OKCODE' '=WEIT',
                                  ' ' 'BDC_CURSOR' 'COWB_COMP-ERFMG(01)'.
*    IF SY-SUBRC <> 0.
    PERFORM bdc_dynpro USING:     ' ' 'SAPLCORU_S' '5100',
                                  '' 'BDC_OKCODE'
                                  '/EBACK',
                                  '' 'SAPLSPO1' '0300',
                                  '' 'BDC_OKCODE'
                                  '=CANC'.
*    ENDIF.

    CALL TRANSACTION 'COR6N' USING   gt_bdc_tab
                             MODE    gv_mode
                             UPDATE gv_update
                       MESSAGES INTO gt_messtab.

*Retrieve error messages displayed during BDC update
    LOOP AT gt_messtab.
*     Builds actual message based on info returned from Call transaction
      CALL FUNCTION 'MESSAGE_TEXT_BUILD'
        EXPORTING
          msgid               = gt_messtab-msgid
          msgnr               = gt_messtab-msgnr
          msgv1               = gt_messtab-msgv1
          msgv2               = gt_messtab-msgv2
          msgv3               = gt_messtab-msgv3
          msgv4               = gt_messtab-msgv4
        IMPORTING
          message_text_output = gv_textout.

      wa_error = wa_data.
      wa_error-err_msg = gv_textout.
      APPEND wa_error TO it_error.
      CLEAR: wa_error.
    ENDLOOP.
    clear: gt_bdc_tab.
    refresh: gt_bdc_tab, gt_messtab.

ENDLOOP.
ENDFORM.                    " UPDATE_DATA

*&---------------------------------------------------------------------*
*&      Form BDC_DYNPRO
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*      -->P_0333   text
*      -->P_0334   text
*      -->P_0335   text
*----------------------------------------------------------------------*
form bdc_dynpro using dynbegin name value.
if dynbegin = 'X'.
    clear gt_bdc_tab.
    move: name to gt_bdc_tab-program,
           value to gt_bdc_tab-dynpro,
           'X'   to gt_bdc_tab-dynbegin.
    append gt_bdc_tab.
else.
    clear gt_bdc_tab.
    move: name to gt_bdc_tab-fnam,
           value to gt_bdc_tab-fval.
    append gt_bdc_tab.
endif.
endform.                    " BDC_DYNPRO
*&---------------------------------------------------------------------*
*&      Form DISP_ERROR
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
* --> p1        text
* <-- p2        text
*----------------------------------------------------------------------*
FORM disp_error .

WRITE:2 ' Message'(007) COLOR COL_HEADING.
SKIP.

* write:2 'The following records failed during updated:'(006).
WRITE😕 sy-uline(100).
FORMAT COLOR COL_HEADING.
WRITE😕        sy-vline, 2 'Order No.',
             16 sy-vline, 24 'Message',
             100 sy-vline.
WRITE😕 sy-uline(100).
FORMAT COLOR COL_NORMAL.
LOOP AT it_error INTO wa_error.
    WRITE😕      sy-vline, 2 wa_error-aufnr_001,
             16 sy-vline , 18 wa_error-err_msg,
             100 sy-vline.
ENDLOOP.
WRITE😕 sy-uline(100).
REFRESH: it_error.

ENDFORM.                    " DISP_ERROR
*&---------------------------------------------------------------------*
*&      Form DISP_SUCCESS
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
* --> p1        text
* <-- p2        text
*----------------------------------------------------------------------*
FORM disp_success .

ENDFORM.                    " DISP_SUCCESS

Re: cor6n error

yogendra_bhaskar — Thu, 28 Jun 2012 09:10:22 GMT

hi saravanan ,

U are getting the order id (aufnr_001) which contain error in it_error , delete those order id data from it_data .

You will have the order id without error .

what else you require here ?

regards ,

Yogendra