Field exit regarding

Former Member — Tue, 23 May 2006 05:48:56 GMT

Dear All ,

Where will I Get the documentation on Field Exit .

IF any body has that , I will be thankfull if hey can send me to personal ID .

raghavendra_g_kulkarni@yahoo.com

Thanks in Advance .

Re: Field exit regarding

Former Member — Tue, 23 May 2006 05:50:25 GMT

Hai Raghavendra

Step by step procedure for creating Field Exits

There are eight steps to creating a field exit:

Step 1: Determine Data Element

Step 2: Go To Field Exit Transaction

Step 3: Create Field Exit

Step 4: Create Function Module

Step 5: Code Function Module

Step 6: Activate Function Module

Step 7: Assign Program/Screen

Step 8: Activate Field Exit

Step 1: Determine Data Element

- Before you can begin adding the functionality for a field exit, you must know the corresponding data element.

- An easy way to determine the data element associated to a particular screen field is to:

Go the appropriate screen.

Position the cursor in the appropriate field.

Press ‘F1’ for field-level help.

Click on the ‘Technical info’ pushbutton (or press ‘F9’) on the help dialog box.

On this Technical Information dialog box, the data element will be specified if the field is 'painted' from the ABAP/4 Dictionary.

Step 2: Go To Field Exit Transaction

- The transaction to create field exits is CMOD.

- You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.

- From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.

- After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.

NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.

Step 3: Create Field Exit

- From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.

- After choosing this menu path, a dialog box will prompt you for the appropriate data element .

- Enter the data element name and click the ‘Continue’ pushbutton.

- Now, you will be able to create the function module associated to the data element’s field exit.

Step 4: Create Function Module

- You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the ‘Continue’ pushbutton.

- In the ‘Function module’ field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:

FIELD_EXIT_<data element>

- You can add an identifier (an underscore followed by a single character ).

- The first function module for a data element’s field exit must be created without an identifier.

- To create the function module, click on the ‘Create’ pushbutton, choose menu path Function module -> Create, or press ‘F5’.

- After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing ‘Enter’, you will be able to go ahead and create the function module.

- Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.

Step 5: Code Function Module

- From the function module’s attributes screen, click on the ‘Source code’ pushbutton or choose the Goto -> Function module menu path to the code of the function module.

- Here you will add your desired functionality for the field exit.

- Remember that field exit’s function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.

- You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.

Step 6: Activate Function Module

- After coding the function module, you must remember to activate it.

- Use the Function module -> Activate menu path to activate the function module.

- At this point, you can return to the field exit transaction.

- You should be able to 'green arrow' back to this transaction.

- When you return to the field exit transaction, you will see an entry for the newly created field exit.

- At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.

- Also, the field exit will not be triggered yet because it is inactive.

Step 7: Assign Program/Screen

- This step is only needed if you want to make a field exit local.

- To make a field exit local, select the field exit and click on the ‘Assign prog./screen’ pushbutton.

- In the dialog box , indicate the appropriate program name and screen number.

This information indicates that the field exit is local to the specified screen in the specified program.

- In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the ‘Fld. Exit’ field.

- If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.

- If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.

Step 8: Activate Field Exit

- The field exit must be active for it to be triggered by the system.

- Activate the field exit by choosing the Field exit -> Activate menu path.

- After assigning the field exit to a change request, its status will change to ‘Active’ and it will be triggered automatically on the appropriate screen(s).

NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers

User Exits

Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.

It is determined be SAP where the sub screen will be displayed.

The syntax is: CALL CUSTOMER-SUBSCREEN

The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project,

and the project has been activated.

Note:

Function codes are only processed in the main screens flow logic

You are not allowed to enter a name for the subscreens command field

You are not allowed to define GUI stauses

You are not allowed to enter a value for Next screen

The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules.

These function modules belongs to the same function group as the subscreen Subscreens are edited with transaction CMOD.

When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next

time you display the calling screen

The developer must create the subscreen and the corresponding PBO and PAI modules

How to identify screen exits

Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.

Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits

MENU EXITS

Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu

entries in the GUI interface. The developer can add his/her own text and logic for the menu.

Function codes for menu exits all start with "+"

Example

We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will

run report ZTEST.

Goto transaction SE43 Area Menu Maintenance

In Area Menu Paramenter type 'S000' (S triple Zero)

Select Change and ignore all the warning screens

Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"

Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01

Goto transaction SE93 and create transaction +C01 that calls report ZTEST.

Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.

Thanks & regards

Sreenivasulu P

Re: Field exit regarding

Former Member — Tue, 23 May 2006 05:51:00 GMT

Re: Field exit regarding

vinod_gunaware2 — Tue, 23 May 2006 05:56:23 GMT

Check mail.

regards

vinod

topic Re: Field exit regarding in Application Development and Automation Discussions

Field exit regarding

Re: Field exit regarding

Re: Field exit regarding

Re: Field exit regarding

Re: Field exit regarding