topic Re: select multiple values in alv grid output in Application Development and Automation Discussions

select multiple values in alv grid output

koolspy_ultimate — Mon, 20 Jun 2011 06:04:18 GMT

hi all ,

i need to select multiple values in an alv grid output and need to post them to one transaction mir7.

i tried this following code. (suggested by dhina)


  wa_fcat1-SELTEXT_L = 'SELECT'.
*wa_fcat1-COL_POS = '1'.
*wa_fcat1-FIELDNAME = 'CHECK'.
  wa_fcat1-CHECKBOX = 'X'.
  wa_fcat1-TABNAME = 'IT_LIPS_F1'.
  wa_fcat1-INPUT(1) = 'X'.
  wa_fcat1-EDIT_MASK(1) = 'X'.
  wa_fcat1-EDIT(1) = 'X'.
  append wa_fcat1 to it_fcat1.
.
.
.

form user_command using ucomm type sy-ucomm
                      sel_det type slis_selfield.
    WHEN 'CLICK'.
      clear wa_lips_f-vbeln.



      read table it_lips_f into wa_lips_f with key vgbel = sel_det-value.


      CLEAR bdcdata_wa.
      bdcdata_wa-program  = 'SAPLMR1M'.
      bdcdata_wa-dynpro   = '6000'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab.

CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval = 'INVFO-BLDAT'. 
      APPEND bdcdata_wa TO bdcdata_tab.

      CONCATENATE SY-DATUM+6(2) SY-DATUM+4(2) SY-DATUM(4) into wa_lips_f-BLDAT.

      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'INVFO-BLDAT'.
      bdcdata_wa-fval = wa_lips_f-BLDAT. 
      APPEND bdcdata_wa TO bdcdata_tab.

      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval = 'RM08M-EBELN'. 
      APPEND bdcdata_wa TO bdcdata_tab.

      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'RM08M-EBELN'. 
      bdcdata_wa-fval = wa_lips_f-vgbel.
      APPEND bdcdata_wa TO bdcdata_tab.

but i am able to pass only one value,

so kindly suggest me ,

thanks in advance,

kool.

Re: select multiple values in alv grid output

former_member182371 — Mon, 20 Jun 2011 07:15:23 GMT

Hi,

have a look at this OSS Note before proceeding further:

Note 381593 - MIRO/MIR7/MIRA: Batch Input is not possible

https://service.sap.com/sap/support/notes/381593

Best regards.

Re: select multiple values in alv grid output

koolspy_ultimate — Tue, 21 Jun 2011 13:59:05 GMT

any updates?

thanks in advance,

kool.

Re: select multiple values in alv grid output

Former Member — Tue, 21 Jun 2011 23:09:53 GMT

Check this thread

[Link1|;

[Link|;

Hope it helps you out.

Cheers,

Bhavana

Re: select multiple values in alv grid output

Former Member — Wed, 22 Jun 2011 05:33:48 GMT

This message was moderated.

Re: select multiple values in alv grid output

koolspy_ultimate — Wed, 22 Jun 2011 08:07:08 GMT

sir when i use this code it is picking some unrelated data into mir7 sir


 WHEN 'CLICK'.
      clear wa_lips_f-vbeln  .
    CLEAR BDCDATA_WA.

loop at it_lips_f1 into wa_lips_f1 where check = 'X'.
*      read table it_lips_f into wa_lips_f with key vgbel = sel_det-value.

*      LOOP AT IT_lips_f INTO wa_lips_f WHERE check = 'X'.

      CLEAR bdcdata_wa.
      bdcdata_wa-program  = 'SAPLMR1M'.
      bdcdata_wa-dynpro   = '6000'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab.

      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval = 'INVFO-BLDAT'. " pass the field name
      APPEND bdcdata_wa TO bdcdata_tab.

      CONCATENATE SY-DATUM+6(2) SY-DATUM+4(2) SY-DATUM(4) into wa_lips_f-BLDAT.

      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'INVFO-BLDAT'. " pass the field name
      bdcdata_wa-fval = wa_lips_f-BLDAT. " pass the date here
      APPEND bdcdata_wa TO bdcdata_tab.


      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval = 'RM08M-EBELN'. " pass the field name
      APPEND bdcdata_wa TO bdcdata_tab.

      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'RM08M-EBELN'. " pass the field name
      bdcdata_wa-fval = wa_lips_f-vgbel.    "vgbel. " pass the date here
      APPEND bdcdata_wa TO bdcdata_tab.



*      CLEAR bdcdata_wa.
*      bdcdata_wa-fnam = 'BDC_CURSOR'.
*      bdcdata_wa-fval = 'DRSEG-WRBTR'. " pass the field name
*      APPEND bdcdata_wa TO bdcdata_tab.
*
*      CLEAR bdcdata_wa.
*      bdcdata_wa-fnam = 'DRSEG-WRBTR'. " pass the field name
*      bdcdata_wa-fval = wa_lips_f-T_KBETR. " pass the date here
*      APPEND bdcdata_wa TO bdcdata_tab.
*
*      CLEAR bdcdata_wa.
*      bdcdata_wa-fnam = 'BDC_CURSOR'.
*      bdcdata_wa-fval = 'DRSEG-MENGE'. " pass the field name
*      APPEND bdcdata_wa TO bdcdata_tab.
*
*      CLEAR bdcdata_wa.
*      bdcdata_wa-fnam = 'DRSEG-MENGE'. " pass the field name
*      bdcdata_wa-fval = wa_lips_f-LFIMG. " pass the date here
*      APPEND bdcdata_wa TO bdcdata_tab.


      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'BDC_CURSOR'.
      bdcdata_wa-fval = 'RM08M-XWARE_BNK'. " pass the field name
      APPEND bdcdata_wa TO bdcdata_tab.

      CLEAR bdcdata_wa.
      bdcdata_wa-fnam = 'RM08M-XWARE_BNK'. " pass the field name
      bdcdata_wa-fval = '2'. " pass the date here
      APPEND bdcdata_wa TO bdcdata_tab.



      CLEAR bdcdata_wa.
      bdcdata_wa-program  = 'SAPLMR1M'.
      bdcdata_wa-dynpro   = '6000'.
      bdcdata_wa-dynbegin = 'X'.
      APPEND bdcdata_wa TO bdcdata_tab.

*
*      CLEAR bdcdata_wa.
*      bdcdata_wa-fnam = 'BDC_OKCODE'.
*      bdcdata_wa-fval = '/00'.
*      APPEND bdcdata_wa TO bdcdata_tab.


      opt-dismode = 'E'.
*      opt-defsize = 'X'.
      CALL TRANSACTION 'MIR7' USING bdcdata_tab OPTIONS FROM opt.

ENDLOOP.

Re: select multiple values in alv grid output

koolspy_ultimate — Wed, 22 Jun 2011 11:58:12 GMT

purpose solved incompletely.