topic Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37. in Application Development and Automation Discussions

"BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Sat, 21 May 2011 10:44:35 GMT

Hi All,

I am executing BAPI -("BAPI_SALESORDER_CREATEFROMDAT2") in SE37 and getting error - "Unpermitted combination of business object BUS2032 and sales doc. category 0".

I passed SD_Doc_Cat - 'C'.

Please suggest, where should i correct.

Regards,

Chessleo.

Edited by: chessleo on May 21, 2011 12:46 PM

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Sat, 21 May 2011 11:25:51 GMT

Sales document category for validation is picked up from master (TVAK-VBTYP) based on the document type (Structure field ORDER_HEADER_IN-DOC_TYPE). Based on the SD document category permitted Business objects are determined by the function module SD_OBJECT_TYPE_DETERMINE. In your case, the value you are passing into document type many not be belonging to the document category permitted for business object BUS2032.

See the form module I_CHECK_TYPE from include LVBAKF0I (Line number 72) for more details.

Regards, Vinod

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Mon, 23 May 2011 06:52:30 GMT

Hi Vinod,

I changed Doc_type = 'TA', earlier i used 'MAST'. Metioned error get solved, but am getting new errors (1)- "Order type 'TA' has not been defined in Sales area <' PGBU ', ' PG ', ' PG ' >" and " ( 2 ) Sales document was not changed".

First time am using this BAPI. kindly suggest, where should i correct.

Edited by: chessleo on May 23, 2011 8:53 AM

Edited by: chessleo on May 23, 2011 8:56 AM

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

former_member404244 — Mon, 23 May 2011 07:11:54 GMT

Hi,

Try creating sales order manually with correct data and then use it in the bapi..

Try using order type 'OR' and see in the bapi.

Regards,

Nagaraj

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Mon, 23 May 2011 07:14:47 GMT

There are certain configurations required to be done for mapping between ORDER TYPE and sales organization/distribution channel. Contact your functional analyst to know more details.

Regards, Vinod

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Mon, 23 May 2011 09:01:55 GMT

Hi ,

There id no provision of passing Business Object Number in "BAPI_SALESORDER_CREATEFROMDAT2" .

Instead of this use function module SD_SALESDOCUMENT_CREATE , all other BAPI's internally calls this function module only.

In this function module youcan pass your document type and business object combination.

I have did the same thing recently and it helped me in creating sales order of different types.

Thanks and Regards,

Mithun

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

paul_quinn — Wed, 25 May 2011 13:17:52 GMT

HI,

Create the order you wish to emulate first in VA01.

then goto SE37 and use BAPISDORDER_GETDETAILEDLIST to list the details of the order

This is the data you will need to populate the order

See SAP notes 93091 & 366265 as a starter here.

The referred notes mentioned in the above notes also should be helpful

kind regards

Paul Quinn

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Thu, 26 May 2011 06:22:39 GMT

Hi All,

As you suggest, I created sales order in VA01. Thats more helpful, coz lots of configuration problem.

If single sales item data in ORDER_ITEM_IN, is creating sales order fine.

if more than one sales item data in ORDER_ITEM_IN, am facing below issue.

Now same value am passing in BAPI - "BAPI_SALESORDER_CREATEFROMDAT2".

When executing first time bapi in the morning, its creating sales order fine.

Next time onwards, its showing below errors.

T ID NUM MESSAGE

S V4 233 SALES_HEADER_IN has been processed successfully

S V4 233 SALES_ITEM_IN has been processed successfully

E KO 144 Order TEMP02070100 already exists

E V4 248 Error in SALES_ITEM_IN 000200

W V1 555 The sales document is not yet complete: Edit data

E V4 219 Sales document was not changed

****************************************************************************************

Kindly suggest where should i correct.

Regards

chessleo.

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

former_member404244 — Thu, 26 May 2011 07:23:04 GMT

Hi,

As per the log it clearly shows that the sales document already exists.. Please remove the sales order number which you are passing in the bapi .. If this is external number then pass different number, but if it is internal number then don't pass the sales order number.

Regards,

Nagaraj

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Thu, 26 May 2011 07:32:52 GMT

Hi Nagaraj,

I am not passing any value in SALESDOCUMENTIN. 'SALESDOCUMENTIN' field is empty.

while executing first time, its wotrking fine and gettting all successful message.

2nd time time onwards am facing this issue and getting mentioned errors.

Regards

chessleo.

Edited by: chessleo on May 26, 2011 9:33 AM

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

former_member404244 — Thu, 26 May 2011 08:00:30 GMT

Hi,

Please share your code.. please have a look at the sample code



      ORDER_HEADER_IN-DOC_TYPE = <DOC_TYPE>.
      ORDER_HEADER_IN-SALES_ORG = <SALES_ORG>.
      ORDER_HEADER_IN-DISTR_CHAN = <DISTR_CHAN>.
      ORDER_HEADER_IN-DIVISION  = <DIVISION>.
       ORDER_ITEMS_IN-ITM_NUMBER = <ITM_NUMBER>.
      ORDER_ITEMS_IN-PLANT      = <PLANT>.
 also pass quantity, unit of measure.
      APPEND ORDER_ITEMS_IN.

Regards,

Nagaraj

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Thu, 26 May 2011 08:15:05 GMT

Hi,

Please find my code. before passing values, am doing initial check.

all the passing values, am getting from ALV.

CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
   EXPORTING
     order_header_in                = lwa_order_header_in
     order_header_inx              = lwa_order_header_inx
   IMPORTING
     salesdocument                  = lfd_vbeln
  TABLES
     return                                =  pit_e_messages
     order_items_in                  =  lit_order_items_in
     order_items_inx                =  lit_order_items_inx
     order_partners                 =  lit_order_partners.

after this code am calling BAPI transaction commit.

my problem is, today morning i executed first time, working fine with sucess msg.

2nd time onwards getting mentioned error.

Regards

chessleo.

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Thu, 26 May 2011 08:23:30 GMT

Hi,

Passing values in BAPI :

_Header data :_
REFDOCTYPE                     ZGK       
DOC_TYPE                       ZRPS      
SALES_ORG                      PGBU
DISTR_CHAN                     PG  
DIVISION                       PG  
REQ_DATE_H                     05/10/2010
PURCH_NO_C                     123456                           "Fixed values
PO_DAT_S                       05/21/2011                        "Fixed values
SD_DOC_CAT                     C 
REF_DOC                        P057
COMP_CDE_B                     W001
REFDOC_CAT                     0.

_Item data :_

ITM_NUM	   MATERIAL    	TARGET_QTY       	 SHORT_TEXT	SAL
		                 	           	   
100	R-I UNSP MAJ COMP 	15	 TESTING1  	EA 
200	R-I UNSP MAJ COMP 	16	 TESTING1  	EA 

Partners Data :

PA	PARTN_NUMB
  	          
SP	603424
SH	200530

********************************

Purchase order no and date - Fixed values

********************************

Please find the passing values.

Regards

chessleo.

Edited by: chessleo on May 26, 2011 10:29 AM

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

former_member404244 — Thu, 26 May 2011 09:04:55 GMT

Hi,

Try this don't pass REFDOCTYPE and pass 10 and 20 instead of 100 and 200 for ITM_NUM.

Regards,

Nagaraj

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Thu, 26 May 2011 10:51:10 GMT

Hi, Now its working fine. thanks a lot.

Re: "BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.

Former Member — Thu, 26 May 2011 11:36:51 GMT

closed.