topic Re: BAPI_SALESORDER_CHANGE in Application Development and Automation Discussions

BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 10:06:49 GMT

Hi All,

I am using BAPI_SALESORDER_CHANGE to add a new line item to SO. when a new line item is added the 'Order Quantity' is not displayed what im passing in Target_qty field of BAPI str. ORDER_ITEM_IN. Also i tried populating schedule line REQ_QTY field but no go.

Please suggest on this.

Thanks.

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 10:09:37 GMT

Did u set the update the flags in BAPISDITMX & BAPISCHDLX.

Regards,

Raghu.

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 10:13:38 GMT

I am leaving the UPDATEFLAG in itm and schd structures blank or (I) since I am adding a line item using the BAPI.

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 10:17:16 GMT

Set the UPDATEFLAG = 'I' and other for fields which are passing in item BAPISDITM ,for this case u need to set 'X' in BAPISDITMX.

Regards,

Raghu.

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 10:21:34 GMT

Try below code

order_header_inx-updateflag = 'U'.

order_item_in-itm_number  = <item number>
order_item_inx-itm_number = <item number>.
order_item_inx-updateflag = 'I'.
 
order_item_in-target_qty  = wa_vbap-kwmeng.
order_item_inx-target_qty = 'X'.
 
schedule_lines-itm_number = <item number>
schedule_lines-sched_line = <Schedule LIne No> .
schedule_lines-req_qty    = <Quantity>.
 
schedule_linesx-itm_number  = <item number>
schedule_linesx-sched_line  = <Schedule LIne no>
schedule_linesx-updateflag  = 'I'.
schedule_linesx-req_qty     = 'X'.

Regards

Vinod

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 10:25:16 GMT

Yes im doing the same.....no go....is it mandatory to populate Schedule line str. for this?

tried even that but erroring....

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 10:33:36 GMT

Schedule line structure is to be populated to update the target qty at item level.

Also check whether you are filling up the mandatory pricing conditions in "conditions_in" and "conditions_inx"

Regards

Vinod

Edited by: Vinod Kumar on Apr 7, 2010 4:05 PM

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 10:44:56 GMT

Well,

What should be the Schedule line number i need to be passing to add this line item....

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 10:51:05 GMT

Populate schedule line number as 0001.

Regards

Vinod

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 11:04:04 GMT

It just gives erroe msg saying

E V1 335 System error: Schedule line 0001 for item 800000 does not exist

E V4 219 Sales document 0200000781 was not changed

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 11:10:05 GMT

Hope your code is as below

order_item_in-itm_number  = '800000'
order_item_inx-itm_number = '800000'
order_item_inx-updateflag = 'I'.
order_item_in-target_qty  = wa_vbap-kwmeng.
order_item_inx-target_qty = 'X'.

schedule_lines-itm_number = '800000'
schedule_lines-sched_line = '0001'
schedule_lines-req_qty    = <Quantity>.
 
schedule_linesx-itm_number  = '800000'
schedule_linesx-sched_line  = '0001'
schedule_linesx-updateflag  = 'I'.
schedule_linesx-req_qty     = 'X'.

Regards

Vinod

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 11:21:48 GMT

yes

i am passing all the above said fields...

Re: BAPI_SALESORDER_CHANGE

Former Member — Wed, 07 Apr 2010 11:25:47 GMT

While creating the sales order through VA01 or changing SO through VA02, is the system generating schedule lines (VBEP Table)?

Regards

Vinod

Re: BAPI_SALESORDER_CHANGE

andrea_olivieri — Wed, 07 Apr 2010 13:02:24 GMT

Hi,

I implemented this simple abap in my trial system.


REPORT  zsdnbapiordrchg.

DATA: lvbak TYPE vbak.

DATA:
v_vbeln TYPE bapivbeln-vbeln,
v_order_header_inx TYPE bapisdh1x,
i_item TYPE TABLE OF bapisditm WITH HEADER LINE,
i_itemx TYPE TABLE OF bapisditmx WITH HEADER LINE,
i_schedule_lines TYPE TABLE OF bapischdl WITH HEADER LINE,
i_schedule_linesx TYPE TABLE OF bapischdlx WITH HEADER LINE,
i_return TYPE TABLE OF bapiret2 WITH HEADER LINE.
DATA: lposnr TYPE vbap-posnr.


PARAMETERS: pvbeln TYPE vbak-vbeln OBLIGATORY.

SELECT SINGLE * FROM vbak INTO lvbak WHERE vbeln = pvbeln.
CHECK sy-subrc = 0.

SELECT MAX( posnr ) FROM vbap INTO lposnr
  WHERE vbeln = pvbeln.

ADD 10 TO lposnr.

v_order_header_inx-updateflag = 'U'.

v_vbeln             = pvbeln.
i_item-itm_number   = lposnr.
i_item-material     = 'T-FV100-EM'.
* i_item-sales_unit = 'KG'.
* i_item-plant      = '1100'.

*i_itemx-itm_number   = lposnr.
*i_itemx-updateflag   = 'I'.
*i_itemx-material     = 'X'.
*i_itemx-plant        = 'X'.
*i_itemx-sales_unit   = 'X'.

i_schedule_lines-itm_number = lposnr.
i_schedule_lines-sched_line = 1.
i_schedule_lines-req_date = sy-datum.
i_schedule_lines-req_qty = 1000.

i_schedule_linesx-itm_number = lposnr.
i_schedule_linesx-sched_line = 1.
i_schedule_linesx-updateflag = 'I'.
i_schedule_linesx-req_date = 'X'.
i_schedule_linesx-req_qty = 'X'.


APPEND i_item.
*APPEND i_itemx.
APPEND i_schedule_lines.

APPEND i_schedule_linesx.

CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
  EXPORTING
    salesdocument    = v_vbeln
    order_header_inx = v_order_header_inx
  TABLES
    return           = i_return
    order_item_in    = i_item
    order_item_inx   = i_itemx
    SCHEDULE_LINES   = i_schedule_lines
    SCHEDULE_LINESX  = i_schedule_linesx.

LOOP AT i_return WHERE type = 'A' OR type = 'E'.
  EXIT.
ENDLOOP.

IF sy-subrc ne 0.
  CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.

Now it should works.

Regards,

Andrea