topic Re: A problem about selection screen radio button in Application Development and Automation Discussions

A problem about selection screen radio button

WLZ — Wed, 15 Jul 2009 06:40:27 GMT

Dear,

On selection screen, there are two radio button, p_mode_d, and p_mode_m, and three selection option, s_bukrs, s_belnr, s_gjahr.

I want to realize that when p_mode_d is set, then, s_bukrs, s_belnr, s_gjahr are not mandatory. When p_mode_m is set, s_bukrs, s_belnr, s_gjahr are mandatory. Here p_mode_d is set 'X' by default.

Now run the program, at first, p_mode_d is set, and s_bukrs, s_belnr, s_gjahr are not mandatory. After select p_mode_m, s_bukrs, s_belnr, s_gjahr are mandatory. But when select p_mode_d again, then, s_bukrs, s_belnr, s_gjahr are still mandatory.

Could you please help me?

Look at my coding here:

SELECTION-SCREEN BEGIN OF BLOCK box1 WITH FRAME TITLE text-001. "Technical datas

SELECTION-SCREEN SKIP.

PARAMETERS: p_file TYPE filename-fileintern DEFAULT 'ZOU_FIN_0005'. "Logical file

SELECTION-SCREEN SKIP.

PARAMETERS: p_mode_d RADIOBUTTON GROUP rad1 USER-COMMAND rad1 DEFAULT 'X',

p_mode_m RADIOBUTTON GROUP rad1.

SELECTION-SCREEN END OF BLOCK box1.

SELECTION-SCREEN BEGIN OF BLOCK box2 WITH FRAME TITLE text-002. "Applicatif data

SELECTION-SCREEN SKIP.

SELECT-OPTIONS: s_bukrs FOR bkpf-bukrs, "Company code:

s_belnr FOR bkpf-belnr, "Accounting document:

s_gjahr FOR bkpf-gjahr, "Fiscal year:

s_budat FOR bkpf-budat, "Posting date:

s_blart FOR bkpf-blart. "Document type:

SELECTION-SCREEN SKIP.

SELECTION-SCREEN END OF BLOCK box2.

AT SELECTION-SCREEN OUTPUT.

IF p_mode_m = c_x.

REFRESH: s_bukrs,

s_belnr,

s_budat.

LOOP AT SCREEN.

IF screen-name = 'S_BUKRS-LOW'.

screen-required = 1.

ENDIF.

IF screen-name = 'S_BELNR-LOW'.

screen-required = 1.

ENDIF.

IF screen-name = 'S_GJAHR-LOW'.

screen-required = 1.

ENDIF.

MODIFY SCREEN.

ENDLOOP.

ENDIF.

Re: A problem about selection screen radio button

Former Member — Wed, 15 Jul 2009 06:48:39 GMT

Hi,

Write an ELSE part in your AT SELECTION-SCREEN OUTPUT (when your p_mode_m is not checked i.e your p_mode_d is checked) and make your select options not mandatory by saying screen-required = 0.


AT SELECTION-SCREEN OUTPUT.
IF p_mode_m = c_x.

REFRESH: s_bukrs,
s_belnr,
s_budat.
LOOP AT SCREEN.
IF screen-name = 'S_BUKRS-LOW'.
screen-required = 1.
ENDIF.
IF screen-name = 'S_BELNR-LOW'.
screen-required = 1.
ENDIF.
IF screen-name = 'S_GJAHR-LOW'.
screen-required = 1.
ENDIF.

MODIFY SCREEN.
ENDLOOP.



ELSEIF p_mode_d = c_x.
REFRESH: s_bukrs,
s_belnr,
s_budat.
LOOP AT SCREEN.
IF screen-name = 'S_BUKRS-LOW'.
screen-required = 0.
ENDIF.
IF screen-name = 'S_BELNR-LOW'.
screen-required = 0.
ENDIF.
IF screen-name = 'S_GJAHR-LOW'.
screen-required = 0.
ENDIF.

MODIFY SCREEN.
ENDLOOP.


ENDIF.

Edited by: Nitwick on Jul 15, 2009 12:22 PM

Edited by: Nitwick on Jul 15, 2009 12:24 PM

Re: A problem about selection screen radio button

Former Member — Wed, 15 Jul 2009 06:49:03 GMT

hi,

in the AT SELECTION-SCREEN OUTPUT EVENT you have to again assign screen-required is deactivate. see this one,

AT SELECTION-SCREEN OUTPUT.

IF p_mode_m = c_x.

REFRESH: s_bukrs,

s_belnr,

s_budat.

LOOP AT SCREEN.

IF screen-name = 'S_BUKRS-LOW'.

screen-required = 1.

ENDIF.

IF screen-name = 'S_BELNR-LOW'.

screen-required = 1.

ENDIF.

IF screen-name = 'S_GJAHR-LOW'.

screen-required = 1.

ENDIF.

MODIFY SCREEN.

ENDLOOP.

ELSEIF p_mode_d = C_X.

REFRESH: s_bukrs,

s_belnr,

s_budat.

LOOP AT SCREEN.

IF screen-name = 'S_BUKRS-LOW'.

screen-required = 0.

ENDIF.

IF screen-name = 'S_BELNR-LOW'.

screen-required = 0.

ENDIF.

IF screen-name = 'S_GJAHR-LOW'.

screen-required = 0.

ENDIF.

MODIFY SCREEN.

ENDLOOP.

ENDIF.

Re: A problem about selection screen radio button

RahulKeshav — Wed, 15 Jul 2009 06:49:41 GMT

Hi ,

the problem is that u hav written code for when u select mode_d ....where is the else part....

try to write else part...

like,,..

else if p-mode_m = 'X'.

REFRESH: s_bukrs,

s_belnr,

s_budat.

LOOP AT SCREEN.

IF screen-name = 'S_BUKRS-LOW'.

screen-required = 0.

ENDIF.

IF screen-name = 'S_BELNR-LOW'.

screen-required = 0

ENDIF.

IF screen-name = 'S_GJAHR-LOW'.

screen-required = 0.

ENDIF.

MODIFY SCREEN.

ENDLOOP.

Please Try ....

thn x

Rahul

Re: A problem about selection screen radio button

Former Member — Wed, 15 Jul 2009 07:01:31 GMT

Hi Maggie,

that functionality is not possible, bcoz next time cursor will not go to At selection screen.

you can code for the error message in AT SELECTION SCREEN. I mean instead of standard default option, u have to give error message with manual code.

Thanks,

Ajay

Re: A problem about selection screen radio button

WLZ — Wed, 15 Jul 2009 07:05:11 GMT

Dear All,

Thank you for your answer.

The method you said I have done, but s_bukrs, s_gjahr, s_belnr are still mandatory when the p_mode_d is set again.

I set debug on 'IF p_mode_m = c_x.', it will run here only the first time to select radio button, then, it will not run here, whatever p_mode_m or p_mode_d is set.

Re: A problem about selection screen radio button

WLZ — Wed, 15 Jul 2009 07:07:32 GMT

Hi, Ajay kumar ,

I don't understand your meaning. Could you explain it in detail?

Re: A problem about selection screen radio button

peter_ruiz2 — Wed, 15 Jul 2009 07:30:50 GMT

Hi Maggie,

Instead of using screen-required = 1 or 0 in your AT SELECTION-SCREEN, you need to do the validation manually like this.

AT SELECTION-SCREEN OUTPUT.

IF p_mode_d EQ 'X'.

IF s_bukrs IS INITIAL.

" show error message here.

ELSEIF s_belnr IS INITIAL.

" show error message here.

ELSEIF s_gjahr IS INITIAL.

" show error message here.

ENDIF.

regards,

Peter

Re: A problem about selection screen radio button

Former Member — Wed, 15 Jul 2009 07:55:33 GMT

Hi Maggie,

Try this code and give default values

SELECTION-SCREEN BEGIN OF BLOCK box1 WITH FRAME TITLE text-001. "Technical datas

SELECTION-SCREEN SKIP.

PARAMETERS: p_file TYPE filename-fileintern DEFAULT 'ZOU_FIN_0005'. "Logical file

SELECTION-SCREEN SKIP.

PARAMETERS: p_mode_d RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND rad1 ,

p_mode_m RADIOBUTTON GROUP rad1 .

SELECTION-SCREEN END OF BLOCK box1.

SELECTION-SCREEN BEGIN OF BLOCK box2 WITH FRAME TITLE text-002. "Applicatif data

SELECTION-SCREEN SKIP.

SELECT-OPTIONS: s_bukrs FOR bkpf-bukrs DEFAULT val1 TO val2 MODIF ID abc, "Company code:

s_belnr FOR bkpf-belnr DEFAULT val3 TO val4 MODIF ID abc , "Accounting document:

s_gjahr FOR bkpf-gjahr DEFAULT val5 TO val6 MODIF ID abc, "Fiscal year:

s_budat FOR bkpf-budat, "Posting date:

s_blart FOR bkpf-blart. "Document type:

SELECTION-SCREEN SKIP.

SELECTION-SCREEN END OF BLOCK box2.

----

At Selection Screen *

----

AT SELECTION-SCREEN OUTPUT .

PERFORM change_selection_screen.

&----

*& Form change_selection_screen

&----

text

----

--> p1 text
<-- p2 text

----

form change_selection_screen .

IF p_mode_m = 'X'.

REFRESH: s_bukrs,

s_belnr,

s_budat.

LOOP AT SCREEN.

IF screen-group1 EQ 'ABC'.

screen-required = 1.

ENDIF.

MODIFY SCREEN.

ENDLOOP.

ENDIF.

IF p_mode_d = 'X'.

REFRESH: s_bukrs,

s_belnr,

s_budat.

LOOP AT SCREEN.

IF screen-group1 EQ 'ABC'.

screen-required = 0.

ENDIF.

MODIFY SCREEN.

ENDLOOP.

ENDIF.

endform. " change_selection_screen

You will need to give values for mandatory fields once you select Radiobutton P_MODE_M.

Since there are no values in Mandatory fields, flow does not go to the program again.

Regards

Milan

Edited by: Milan Shah on Jul 15, 2009 10:00 AM

Edited by: Milan Shah on Jul 15, 2009 10:03 AM

Re: A problem about selection screen radio button

WLZ — Wed, 15 Jul 2009 08:08:09 GMT

Dear Milan Shah ,

In your method, it still not solve my problem. Thank you for your help.

Re: A problem about selection screen radio button

Former Member — Wed, 15 Jul 2009 08:18:33 GMT

Hi Maggie,

This code will work .....

SELECTION-SCREEN BEGIN OF BLOCK box1 WITH FRAME TITLE text-001. "Technical datas

SELECTION-SCREEN SKIP.

PARAMETERS: p_file TYPE filename-fileintern DEFAULT 'ZOU_FIN_0005'. "Logical file

SELECTION-SCREEN SKIP.

PARAMETERS: p_mode_d RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND rad1,

p_mode_m RADIOBUTTON GROUP rad1.

SELECTION-SCREEN END OF BLOCK box1.

SELECTION-SCREEN BEGIN OF BLOCK box2 WITH FRAME TITLE text-002. "Applicatif data

SELECTION-SCREEN SKIP.

SELECT-OPTIONS: s_bukrs FOR bkpf-bukrs DEFAULT '1000' TO '1001' MODIF ID abc, "Company code:

s_belnr FOR bkpf-belnr DEFAULT '0100000000' TO '010000000000' MODIF ID abc , "Accounting document:

s_gjahr FOR bkpf-gjahr DEFAULT '2007' TO '2009' MODIF ID abc, "Fiscal year:

s_budat FOR bkpf-budat, "Posting date:

s_blart FOR bkpf-blart. "Document type:

SELECTION-SCREEN SKIP.

SELECTION-SCREEN END OF BLOCK box2.

----

At Selection Screen *

----

AT SELECTION-SCREEN OUTPUT .

*--> Change Selection Screen

PERFORM change_selection_screen.

&----

*& Form change_selection_screen

&----

form change_selection_screen .

IF p_mode_m = 'X'.

LOOP AT SCREEN.

IF screen-group1 EQ 'ABC'.

screen-required = 1.

ENDIF.

MODIFY SCREEN.

ENDLOOP.

ENDIF.

IF p_mode_d = 'X'.

LOOP AT SCREEN.

IF screen-group1 EQ 'ABC'.

screen-required = 0.

ENDIF.

MODIFY SCREEN.

ENDLOOP.

ENDIF.

endform.

Re: A problem about selection screen radio button

sridhar_meesala — Wed, 15 Jul 2009 08:22:12 GMT

Hi,

Pls have a look at this link. Its a similar case but in Module pool programming. This may be helpful to you.

[;

Thanks,

Sri.

Re: A problem about selection screen radio button

WLZ — Wed, 15 Jul 2009 08:38:38 GMT

Dear Milan Shah ,

I have no default value for s_bukrs, s_belnr, s_gjahr. So I can't realize it with your code.

Thank you for your help.

Re: A problem about selection screen radio button

Former Member — Wed, 15 Jul 2009 08:50:43 GMT

Hi Maggie,

Try like this...


Tables: bkpf.
SELECTION-SCREEN BEGIN OF BLOCK box1 WITH FRAME TITLE text-001. "Technical datas
SELECTION-SCREEN SKIP.
PARAMETERS: p_file TYPE filename-fileintern DEFAULT 'ZOU_FIN_0005'. "Logical file
SELECTION-SCREEN SKIP.
PARAMETERS: p_mode_d RADIOBUTTON GROUP rad1 USER-COMMAND rad1 DEFAULT 'X',
p_mode_m RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK box1.

SELECTION-SCREEN BEGIN OF BLOCK box2 WITH FRAME TITLE text-002. "Applicatif data
SELECTION-SCREEN SKIP.
SELECT-OPTIONS: s_bukrs FOR bkpf-bukrs, "Company code:
s_belnr FOR bkpf-belnr, "Accounting document:
s_gjahr FOR bkpf-gjahr, "Fiscal year:
s_budat FOR bkpf-budat, "Posting date:
s_blart FOR bkpf-blart. "Document type:
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK box2.
START-OF-SELECTION.
if p_mode_m = 'X'.
  IF s_belnr-LOW  IS INITIAL.
    MESSAGE S398(00) with 'fill s_belnr' .
    leave LIST-PROCESSING.
  ENDIF.
  IF s_bukrs-LOW  IS INITIAL.
    MESSAGE S398(00) with 'fill s_bukrs'.
    leave LIST-PROCESSING.
  ENDIF.
  IF s_gjahr-LOW  IS INITIAL.
    MESSAGE S398(00) with 'fill s_gjahr'.
    leave LIST-PROCESSING.
  ENDIF.
ENDIF.

Regards

Debarshi

Re: A problem about selection screen radio button

WLZ — Wed, 15 Jul 2009 09:03:48 GMT

Dear Roy,

I think maybe your method is the only way to realize. Like others said it only can realize by manually with message, not realize in function.

Thank you