topic BAPI_INSPECTIONPLAN_CREATE - Issue in Application Development and Automation Discussions

BAPI_INSPECTIONPLAN_CREATE - Issue

Former Member — Wed, 01 Jul 2009 16:12:59 GMT

Hi,

I am trying to create Inspection plan using BAPI -> BAPI_INSPECTIONPLAN_CREATE

As per requirement I want to copy Inspection plan details (like Material task allocation) of Material 'MAT1' to material 'MAT2'.

here MAT2 is created with reference to MAT1

For this i am importing following values to BAPI...

1. in table 'TASK' : group no(1), counter, valid from date, usage, plant, status and unit

2. in table MATERIALTASKALLOCATION : Material (MAT2), Plant and counter

On executing i am getting following messages:

E BAPI 001

A CPCL 006 Task list Q 1 1 already exists

A CPCC_DT 210 For further processing, the routing entry is missing

Can you please tell me why this has happen?

Is there any BAPI for Inspection plan Change/Display?

Also same scenario i have tested in QP01 with same details that i have mentioned above. There it is working properly.

Re: BAPI_INSPECTIONPLAN_CREATE - Issue

Former Member — Thu, 02 Jul 2009 09:26:52 GMT

Hi,

Function Modules:

INSPECTIONPLAN_DISPLAY

INSPECTIONPLAN_CHAR_DISPLAY

In TASK table, you must enter a value for the following attributes to ensure the consistency of the header data:

TASK_LIST_USAGE, PLANT, TASK_LIST_STATUS, TASK_MEASURE_UNIT (unit of measure)

You can only specify a task list group (attributes TASK_LIST_GROUP and GROUP_COUNTER) with external number assignment. For internal number assignment, the task list group and the group counter are automatically determined during processing.

Re: BAPI_INSPECTIONPLAN_CREATE - Issue

Former Member — Thu, 02 Jul 2009 10:03:43 GMT

Hi Neenu,

I hv checked these FM:

INSPECTIONPLAN_DISPLAY

INSPECTIONPLAN_CHAR_DISPLAY

both function module are not usefull in my case as they are not giving me details related Material Task allocation

I am already passing these parameters : TASK_LIST_USAGE, PLANT, TASK_LIST_STATUS, TASK_MEASURE_UNIT (unit of measure) to BAPI but still getting error that i have mentioned above.

How to specify a task list group (attributes TASK_LIST_GROUP and GROUP_COUNTER) with external number assignment ?

thanks,

Re: BAPI_INSPECTIONPLAN_CREATE - Issue

Former Member — Thu, 02 Jul 2009 10:10:49 GMT

Hi,

Check structure: BAPI1191_TSK_C :Task List Header Data in CREATE-BAPI for Inspection Plans

Re: BAPI_INSPECTIONPLAN_CREATE - Issue

Former Member — Thu, 02 Jul 2009 10:32:26 GMT

Hi Neenu,

Thanks for attending my issue.

Please go though the test data that i am passing to BAPI

In table TASK

1. TASK_LIST_GROUP : 2 (already created)

2. GROUP_COUNTER : 1

3. VALID_FROM : 30.06.2009 (from table PLKO)

4. TASK_LIST_USAGE : 3

5. PLANT : A-L1

6. TASK_LIST_STATUS : 4

7. TASK_MEASURE_UNIT : EA

8. IND_UNITS_EXT_NUMBERING : 0 (any external numbering)

In table MATERIALTASKALLOCATION

1. Material : QMRM02 (this material has already allocated to group 1 and 3)

2. Plant : A-L1

3. Group counter : 1

Still i am getting these messages:

E BAPI 001

A CPCL 006 Task list Q 2 1 already exists

A CPCC_DT 210 For further processing, the routing entry is missing

If i go for testing in transaction QP01 with same data mentioned above then material is getting allocated to group '2' so why not i am getting success in BAPI ?

Re: BAPI_INSPECTIONPLAN_CREATE - Issue

Former Member — Fri, 03 Jul 2009 05:35:11 GMT

Still no luck from my side...

Should i switch to alternative solution like BDC for Tcode QP01 ? or i need to put extra efforts with same BAPI ?

Plz help...

Re: BAPI_INSPECTIONPLAN_CREATE - Issue

Former Member — Sun, 02 Dec 2012 09:23:28 GMT

I am also getting the error.

Can you let me know what was the fix for this?

Re: BAPI_INSPECTIONPLAN_CREATE - Issue

Former Member — Mon, 03 Dec 2012 04:44:58 GMT

You can eliminate this error by tweaking the main logic a little bit for Group Counter.

Fetch task list group & group counter from table MAPL based on Material, Plant and Task List Type as 'Q' and store the results in an Internal Table IT_MAPL.
Then sort the records in the Internal Table IT_MAPL by Material Plant Task List Group descending & Group Counter descending.
Read Internal Table IT_MAPL with index as '1'.
Derive the new Group counter by incrementing IT_MAPL-PLNAL.
Assign this new Group Counter to TASK Structure.

You can write a wrapper FM for this logic or can use enhancement spot in the beginning of the BAPI.

Re: BAPI_INSPECTIONPLAN_CREATE - Issue

Former Member — Mon, 03 Dec 2012 05:15:00 GMT

Hi Amol,

Please check this Sample Code .

ZSTRUC_INSPECTION_PLAN

1 MATNR     Material Number
2 PLNAL     Group Counter
3 PLNNR     Key for Task List Group
4 STTAG      Key date
5 WERKS      WERKS_D

*"----------------------------------------------------------------------
*"*"Local Interface:
*" EXPORTING
*" VALUE(RETURN) TYPE BAPIRET2
*" TABLES
*" ITAB STRUCTURE ZSTRUC_INSPECTION_PLAN OPTIONAL
*"----------------------------------------------------------------------
* Developed by Smruti Ranjan Mohanty

* Global data declarations

DATA: W_TAB LIKE ZSTRUC_INSPECTION_PLAN.
DATA: DAT TYPE BUDAT,
V_BUDAT TYPE BUDAT.

DAT = SY-DATUM .

   CALL FUNCTION 'CONVERT_DATE_FORMAT'
    EXPORTING
      I_DATE      = DAT
    IMPORTING
      E_CALC_DATE = V_BUDAT.

LOOP AT ITAB INTO W_TAB.
REFRESH BDCDATA.

    PERFORM BDC_DYNPRO      USING 'SAPLCPDI' '8010'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RC271-PLNNR'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RC27M-MATNR'
                                  ' '.
    PERFORM BDC_FIELD       USING 'RC27M-WERKS'
                                  W_TAB-WERKS .          "'3300'.               " plant
    PERFORM BDC_FIELD       USING 'RC271-PLNNR'
                                  W_TAB-PLNNR.           "'vs_cons4'.           " group
    PERFORM BDC_FIELD       USING 'RC271-STTAG'
                                  V_BUDAT .              "'21.07.2011'.          "W_TAB-STTAG .   "        '21.07.2011'.           " date
    PERFORM BDC_DYNPRO      USING 'SAPLCPDI' '1200'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RC27X-ENTRY_ACT'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=MTUE'.
    PERFORM BDC_FIELD       USING 'RC27X-ENTRY_ACT'
                                  '1'.
    PERFORM BDC_DYNPRO      USING 'SAPLCZDI' '4010'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RC271-PLNNR'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=P++'.
    PERFORM BDC_DYNPRO      USING 'SAPLCZDI' '4010'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RC271-PLNNR'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=P+'.
    PERFORM BDC_DYNPRO      USING 'SAPLCZDI' '4010'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'MAPL-WERKS(02)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=BACK'.

PERFORM BDC_FIELD USING 'MAPL-PLNAL(02)'
W_TAB-PLNAL . "'1'. " 1

SHIFT W_TAB-MATNR LEFT DELETING LEADING '0'.

    PERFORM BDC_FIELD       USING 'MAPL-MATNR(02)'
                                  W_TAB-MATNR .            "'40013140'.                      " ip
    PERFORM BDC_FIELD       USING 'MAPL-WERKS(02)'
                                  W_TAB-WERKS .         "'3300'.                          " plant
    PERFORM BDC_DYNPRO      USING 'SAPLCPDI' '1200'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RC27X-ENTRY_ACT'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=BU'.
    PERFORM BDC_FIELD       USING 'RC27X-ENTRY_ACT'
                                  '1'.

PERFORM BDC_MATERIAL_ASSIGN USING 'QP01'.

* ****************GET ALL MESSAGE DATA............................

    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID   = SY-MSGID
        LANG = 'EN'
        NO   = SY-MSGNO
        V1   = SY-MSGV1
        V2   = SY-MSGV2
        V3   = SY-MSGV3
        V4   = SY-MSGV4
      IMPORTING
        MSG = RETURN-MESSAGE.
    CLEAR: W_TAB.
ENDLOOP.

ENDFUNCTION.

*Text elements
*----------------

Regard's

Smruti Ranjan