topic Re: Short Dump while multiplying curr & decimal in Application Development and Automation Discussions

Short Dump while multiplying curr & decimal

Former Member — Fri, 10 Apr 2009 17:43:56 GMT

I have a small equation like this:

p0008-ansal = p0008-ansal * p0027-kpr02 / 100.

Apparently both the internal format seems to be P type but of different lengths. Since am multiplying a currency (ansal) with decimal (kpr02), am really not able to understand why its throwing dump.

Below is the dump:

Error analysis

An arithmetic operation in the current program "ZHRPA_COST_DIST" attempts

to process a field of type P that contains an invalid

BCD format.

Possible reasons:

1. If the field is part of a field string and its current contents are

hex 20: The field string was deleted with MOVE SPACE ... instead of

CLEAR.

2. The VARYING parameter was incorrectly placed within a DO loop,

e.g. because the TIMES parameter was too large.

Similar for WHILE ... VARY.

3. A FIELD-SYMBOL was incorrectly assigned.

Any clues plz...

Thanks

Kiran

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 10 Apr 2009 17:54:46 GMT

Multipling currency with amount?

i guess you should have a conversion factor of currency instead, which would be integer..

When you multiply these you get proper answer.

Regards,

Lalit Mohan Gupta.

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 10 Apr 2009 17:59:45 GMT

Hi,

AM multiplying with Currency with Decimals..i.e a fraction. and then dividing by 100.

can you please explain with a example. I ddint understand what you tried to say.

Thanks

Kiran

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 10 Apr 2009 18:10:50 GMT

what is the type of your amount and currency

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 10 Apr 2009 18:12:29 GMT

Dollars.

Thanks

Kiran

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 10 Apr 2009 18:17:28 GMT

what is the technical characterstics?

dollars as in what ?

it is currency?

then how can you multiply this with amount?

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 10 Apr 2009 18:17:35 GMT

Hi Kiran,

Your dump claims there is an issue with the "BCD format"

This means the thousand and decimal separators are interchanged in one of the fields (ansal or kpr02) as against the user settings and hence the issue.

In debugging can you confirm the formats?

Cheers,

Aditya

Re: Short Dump while multiplying curr & decimal

Former Member — Thu, 23 Apr 2009 19:54:39 GMT

I am executing this report for several pernrs. But its failing at only 1 case and i could find any problem with the data.

Below is the data from debug mode:

kpr : 3.00 ( type: p(3) decimals 2)

ansal: 132321.10 (type: p(8) decimals 2)

Any clues plz.

Thanks

Kiran

Edited by: kiran dasari on Apr 24, 2009 7:51 PM

Re: Short Dump while multiplying curr & decimal

jayanthi_jayaraman — Fri, 24 Apr 2009 14:26:38 GMT

Hi,

Try this.

data v1 type p0008-ansal value '132321.10'.

data v2 type p0027-kpr02 value '3.00'.

data v3(21) type c.

v3 = ( v1 * v2 ) / 100.

v1 = v3.

write v1.

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 24 Apr 2009 14:41:15 GMT

Hi Jayanthi,

Dump is occuring only for that particular record. rest of the records are passing successfully. So can you please tell me any specific reason for this?

thanks

Kiran

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 24 Apr 2009 18:58:08 GMT

Hi Jayanthi,

I tried that way and still no charm.

It failed again for the same record.

this is the code

DATA: l_ansal_temp(21) TYPE c.

l_ansal_temp = L_ANSAL * W_KPR / 100.

move l_ansal to lni-ansal.

Thanks

Kiran

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 24 Apr 2009 19:23:22 GMT

See if this helps:

p0008-ansal = p0008-ansal  / 100.
p0008-ansal = p0008-ansal * p0027-kpr02

Rob

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 24 Apr 2009 19:59:44 GMT

Rob,

This did not bring too

As I said, its dumping only with one pernr. Rest all are passing thru fine. Am not finding any fault with the values too... Any more clues plz.

Thanks

Kiran

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 24 Apr 2009 20:04:36 GMT

Which line did it dump on and what were the vaules? (I'm guessing the division.)

Rob

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 24 Apr 2009 20:21:26 GMT

Oops it was at a different line but the dump says description remains the same:

My Code:

if not p0008-ansal eq 0.

p0008-ansal = p0008-ansal / 100.

p0008-ansal = p0008-ansal * p0027-kpr02

endif. --> Dump Pointing here now.

Thanks

Kiran

Edited by: kiran dasari on Apr 25, 2009 1:56 AM

Re: Short Dump while multiplying curr & decimal

Former Member — Fri, 24 Apr 2009 20:26:50 GMT

So your original problem is solved?

Rob

Re: Short Dump while multiplying curr & decimal

Former Member — Mon, 27 Apr 2009 13:12:12 GMT

But still am getting the same dump at endif.

Any more clues plz..

thanks

kiran

Re: Short Dump while multiplying curr & decimal

Former Member — Mon, 27 Apr 2009 13:17:48 GMT

Same problem or something new? What error does the new dump give?

Rob

Re: Short Dump while multiplying curr & decimal

Former Member — Mon, 27 Apr 2009 13:18:20 GMT

hi try like this,

ansal -> (type: p(12) decimals 2)

This error may be because of overflow.

Regards

Re: Short Dump while multiplying curr & decimal

Former Member — Mon, 27 Apr 2009 16:42:38 GMT

Hi Rob, am still getting a dump:

Below is my complete code:

DO VARYING w_kst FROM p0027-kst01 NEXT p0027-kst02

VARYING w_kpr FROM p0027-kpr01 NEXT p0027-kpr02

VARYING w_fct FROM p0027-fct01 NEXT p0027-fct02

VARYING w_fcd FROM p0027-fcd01 NEXT p0027-fcd02

VARYING w_fkber FROM p0027-fkber01 NEXT p0027-fkber02

VARYING w_grant FROM p0027-grant01 NEXT p0027-grant02

VARYING w_auf FROM p0027-auf01 NEXT p0027-auf02

VARYING w_psp FROM p0027-psp01 NEXT p0027-psp02.

IF w_kpr = 0.

EXIT.

ENDIF.

lni-begda = p0027-begda.

lni-endda = p0027-endda.

IF NOT w_fct IS INITIAL.

lni-kostl = w_fct.

lni-cfcflag = 'F'.

ELSE.

lni-kostl = w_kst.

lni-cfcflag = 'C'.

ENDIF.

lni-geber = w_fcd.

lni-fkber = w_fkber.

lni-grant = w_grant.

lni-aufnr = w_auf.

lni-pspsp = w_psp.

lni-pkprz = w_kpr.

IF w_kpr NE 100.

Begin of DASARIKB Insert & Comment

IF NOT l_ansal EQ 0.

lni-ansal = l_ansal / 100.

lni-ansal = l_ansal * w_kpr.

ENDIF.

IF NOT l_betrg EQ 0. -

> Dump is pointing here.

lni-betrg = l_betrg / 100.

lni-betrg = l_betrg * w_kpr.

ENDIF.

LNI-ANSAL = L_ANSAL * W_KPR / 100.
LNI-BETRG = L_BETRG * W_KPR / 100.
End of DASARIKB Insert & Comment

Dump description:

An arithmetic operation in the current program "ZHRPA_COST_DIST" attempts

to process a field of type P that contains an invalid

BCD format.

Possible reasons:

1. If the field is part of a field string and its current contents are

hex 20: The field string was deleted with MOVE SPACE ... instead of

CLEAR.

2. The VARYING parameter was incorrectly placed within a DO loop,

e.g. because the TIMES parameter was too large.

Similar for WHILE ... VARY.

3. A FIELD-SYMBOL was incorrectly assigned.

Pl let me know.

Thanks

Kiran