topic Re: Table control (Page down ) not working for OASV Tcode in Application Development and Automation Discussions

Table control (Page down ) not working for OASV Tcode

Former Member — Tue, 24 Mar 2009 14:44:21 GMT

Hi all,

I have written a BDC to call transaction OASV. I have to fill a table control which has initial 10 lines in display. I will have more than 10 items to fill in the table control.

But while recording through SHDB i dont get the recording for the page down. However I tried to write the code my self with the OK_CODE as '=P+' as well as 'BDC_OKCODE' as '/00'. Still it is not working. It is over writing the lines once initial 10 lines finishes again when the next set is added. Pls guide me in this.

Thanks and Regards,

Dileep.C.

Re: Table control (Page down ) not working for OASV Tcode

vyende — Tue, 24 Mar 2009 21:34:45 GMT

Try 'BDC_OKCODE' as 'F23'

Re: Table control (Page down ) not working for OASV Tcode

former_member480923 — Tue, 24 Mar 2009 22:43:52 GMT

Give the OK_CODE = F23

and set DEFSIZE = 'X' in the option of the BDC Call Transaction.

Hope That Helps

Anirban M.

Re: Table control (Page down ) not working for OASV Tcode

Former Member — Wed, 25 Mar 2009 01:27:37 GMT

In recording itself take 2 lines for that table control. Enter first line & click on '+' (add new line) button so automatically new empty line will be displayed as first line of the table control, now enter the data and see the generated program of SHDB. Based on that you can program.

Re: Table control (Page down ) not working for OASV Tcode

Former Member — Wed, 25 Mar 2009 06:16:53 GMT

HI Mukherjee,

I tried with OK CODE F23 the cursor is going to next line but not taking new page.

in my case i have 20 records to update in table control but i can insert 10 records in the first page after 10th record cursor is coming again back to first record it is over writing the old 10 records not getting new page for the remaining 10 records.

kinldy check the Below code for u r reference

LOOP AT IT_HEADER_TABLE INTO WA_HEADER_TABLE.

PERFORM BDC_DYNPRO USING 'SAPMA03B' '0100'.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'RA01B-BLART'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'/00'.

PERFORM BDC_FIELD USING 'RA01B-BLDAT'

WA_HEADER_TABLE-BLDAT."'01.04.2009'.

PERFORM BDC_FIELD USING 'RA01B-BUDAT'

WA_HEADER_TABLE-BUDAT."'01.04.2009'.

PERFORM BDC_FIELD USING 'RA01B-MONAT'

WA_HEADER_TABLE-MONAT. "'01'.

PERFORM BDC_FIELD USING 'RA01B-BUKRS'

WA_HEADER_TABLE-BUKRS . "'RKD1'.

PERFORM BDC_FIELD USING 'RA01B-BLART'

WA_HEADER_TABLE-BLART."'AA'.

MOVE 1 TO IDX.

DO IDX TIMES.

LOOP AT IT_ITEMS_TABLE INTO WA_ITEMS_TABLE

WHERE RECNO = WA_HEADER_TABLE-RECNO.

PERFORM BDC_DYNPRO USING 'SAPMA03B' '0110'.

CONCATENATE 'RA01B-HKONT(' IDX ')' INTO FNAM.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

FNAM.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'=F22'.

CONCATENATE 'RA01B-SHKZG(' IDX ')' INTO FNAM.

PERFORM BDC_FIELD USING FNAM

WA_ITEMS_TABLE-NEWBS." 'H'.

CONCATENATE 'RA01B-PRCTR(' IDX ')' INTO FNAM.

PERFORM BDC_FIELD USING FNAM

WA_ITEMS_TABLE-PRCTR."'C5000'.

CONCATENATE 'RA01B-HKONT(' IDX ')' INTO FNAM.

PERFORM BDC_FIELD USING FNAM

WA_ITEMS_TABLE-NEWKO."'120005'.

CONCATENATE 'RA01B-DMBTR(' IDX ')' INTO FNAM.

PERFORM BDC_FIELD USING FNAM

WA_ITEMS_TABLE-WRBTR." '5000'.

CONCATENATE 'RA01B-SGTXT(' IDX ')' INTO FNAM.

PERFORM BDC_FIELD USING FNAM

WA_ITEMS_TABLE-SGTXT." 'TESTING'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'/00'.

IDX = IDX + 1.

IF IDX = '10'.

PERFORM BDC_DYNPRO USING 'SAPMA03B' '0110'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'F23'.

PERFORM BDC_DYNPRO USING 'SAPMA03B' '0110'.

CONCATENATE 'RA01B-HKONT(' IDX ')' INTO FNAM.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

FNAM.

IDX = 1.

ENDIF.

ENDLOOP.

ENDDO.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'RA01B-HKONT(01)'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'=UPDA'.

CTU_PARAMS-DEFSIZE = 'X'.

CTU_PARAMS-DISMODE = 'A'.

CALL TRANSACTION 'OASV' USING BDCDATA OPTIONS FROM CTU_PARAMS

MESSAGES INTO TMESS_MTAB.

CLEAR: IDX.

With Regards

Dileep.c

Re: Table control (Page down ) not working for OASV Tcode

Former Member — Thu, 26 Mar 2009 06:07:16 GMT

Hi,

No its not working...same problem...it overwrites the lines after the first 10 lines are inserted...

Anybody done BDC with OASV transaction....

Thanks

Dileep.c

Re: Table control (Page down ) not working for OASV Tcode

Former Member — Thu, 26 Mar 2009 07:24:50 GMT

Hi Kumar,

Declare a varriable VAL(2) TYPE N VALUE 10.

in the loop when you want to do a page down after 10 row you can use

VAL = VAL + 1.
        IF VAL EQ 10.
        PERFORM BDC_FIELD USING 'BDC_OKCODE' '=POAN'.
        PERFORM BDC_DYNPRO      USING 'SAPMA03B' '0110'.
        VAL = 1.
        
      ENDIF.

After the loop make the val = 1 again.

Reagrds, Amit.

Edited by: Amit Biswas on Mar 26, 2009 12:56 PM

Edited by: Amit Biswas on Mar 26, 2009 12:58 PM

Edited by: Amit Biswas on Mar 26, 2009 1:01 PM

Re: Table control (Page down ) not working for OASV Tcode

Former Member — Thu, 26 Mar 2009 07:51:09 GMT

HI Amit,

i tried with this code,

VAL = VAL + 1.

IF VAL EQ 10.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=POAN'.

PERFORM BDC_DYNPRO USING 'SAPMA03B' '0110'.

VAL = 1.

ENDIF.

No its not working...same problem...it is not triggering new page and cursor going back to first line .it overwrites the lines after the first 10 lines are inserted...

Thanks

Dileep.c

Re: Table control (Page down ) not working for OASV Tcode

Former Member — Thu, 02 Apr 2009 06:31:50 GMT

Hi all,

Issue was not yet resolved. kindly help me out to get the page down.

I have written a BDC to call transaction OASV. I have to fill a table control which has initial 10 lines in display. I will have more than 10 items to fill in the table control.

Thanks and Regards,

Dileep.C.

Re: Table control (Page down ) not working for OASV Tcode

Former Member — Wed, 15 Jul 2009 11:21:36 GMT

Hi,

Thanks for u r replays.

No solution found. closing thread.