topic Re: dynamic internal table structure in Application Development and Automation Discussions

dynamic internal table structure

Former Member — Mon, 23 Mar 2009 02:47:24 GMT

can anybody give me a sample code of creating a dynamic internal table structure? what im getting from searching the net is that it acquires the table structure of the table you will define in the code. but what i need to do is that i should be the one to define the fields, type, etc....

Re: dynamic internal table structure

Former Member — Mon, 23 Mar 2009 02:51:46 GMT

Hi,

Declaration for Dynamic Table:-

FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,

<dyn_table1> TYPE STANDARD TABLE,

<dyn_wa1>,

<dyn_wa>.

FIELD-SYMBOLS: <l_fs_dyn> TYPE ANY,

<l_fs_bom> TYPE ANY.

*---Dynamic Internal Table

DATA: dy_table TYPE REF TO data,

dy_table1 TYPE REF TO data,

dy_line TYPE REF TO data.

Creation of Dynamic Internal Table:-

CALL METHOD cl_alv_table_create=>create_dynamic_table

EXPORTING

it_fieldcatalog = fcat (for which internal table needs to be built)

IMPORTING

ep_table = dy_table

EXCEPTIONS

generate_subpool_dir_full = 1

OTHERS = 2

IF sy-subrc <> 0.

ENDIF.

Population of Dynamic Internal Table:-

CLEAR: l_tabix,

w_tabix.

ASSIGN dy_table->* TO <dyn_table>.

CREATE DATA dy_line LIKE LINE OF <dyn_table>.

ASSIGN dy_line->* TO <dyn_wa>.

ASSIGN dy_table->* TO <dyn_table1>.

CREATE DATA dy_line LIKE LINE OF <dyn_table1>.

ASSIGN dy_line->* TO <dyn_wa1>.

LOOP AT it_parent.

l_tabix = sy-tabix.

LOOP AT fcat INTO ls_fcat TO 23."WHERE col_pos <= '19'.

ASSIGN COMPONENT ls_fcat-fieldname

OF STRUCTURE <dyn_wa> TO <l_fs_dyn>.

ASSIGN COMPONENT ls_fcat-fieldname

OF STRUCTURE it_parent TO <l_fs_bom>.

<l_fs_dyn> = <l_fs_bom>.

ENDIF.

ENDLOOP

APPEND <dyn_wa> TO <dyn_table>.

CLEAR: <dyn_wa>,

<dyn_wa1>,

<l_fs_bom>,

<l_fs_dyn>.

Build your fcat as field type etc.....

Thanks & Regards,

Ruchi Tiwari

Re: dynamic internal table structure

Former Member — Mon, 23 Mar 2009 02:52:10 GMT

hi,

FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE ,

<dyn_wa>.

*---Dynamic Internal Table

DATA: dy_table TYPE REF TO data,

dy_line TYPE REF TO data.

ASSIGN dy_table->* TO <dyn_table>.

CREATE DATA dy_line LIKE LINE OF <dyn_table>.

ASSIGN dy_line->* TO <dyn_wa>.

thanks

Re: dynamic internal table structure

former_member632729 — Mon, 23 Mar 2009 03:43:56 GMT

Hi Dude,

Go through this Link :

Field Symbols

Link:[http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm]

Link:[http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb387a358411d1829f0000e829fbfe/content.htm]

Example


DATA: wa(10) VALUE '0123456789'.

DATA: BEGIN OF line1,
         col1(3),
         col2(2),
         col3(5),
      END OF line1.

DATA: BEGIN OF line2,
         col1(2),
         col2 LIKE sy-datum,
      END OF line2.

FIELD-SYMBOLS: <f1> STRUCTURE line1 DEFAULT wa,
               <f2> STRUCTURE line2 DEFAULT wa.

WRITE: / <f1>-col1, <f1>-col2, <f1>-col3,
       / <f2>-col1, <f2>-col2.

Example using the correct syntax (TYPE and CASTING):

DATA: wa(10) VALUE '0123456789'.

DATA: BEGIN OF line1,
         col1(3),
         col2(2),
         col3(5),
      END OF line1.

DATA: BEGIN OF line2,
         COL1(2),
         COL2 LIKE sy-datum,
      END OF line2.

FIELD-SYMBOLS: <f1> LIKE line1.
ASSIGN wa TO <f1> CASTING.

FIELD-SYMBOLS: <f2> LIKE line2.
ASSIGN wa TO <f2> CASTING.

WRITE: / <f1>-col1, <F1>-col2, <F1>-col3,
       / <f2>-col1, <F2>-col2.

Edited by: Raghunath Shyamala on Mar 23, 2009 4:44 AM

Re: dynamic internal table structure

Former Member — Mon, 23 Mar 2009 04:00:58 GMT

is it possible to have an indefinite number of fields?

Re: dynamic internal table structure

Former Member — Mon, 23 Mar 2009 04:07:37 GMT

Hi,

You have to determine the number of fields atleast at run time dynamically and prepare your fieldcatalog that needs to be passed to create_table method.

Regards,

Raghavendra

Re: dynamic internal table structure

Former Member — Mon, 23 Mar 2009 04:13:36 GMT

hi ruchi, im a newbie in this language. some symbols are not defined in your sample code. can i have the correct code?

Re: dynamic internal table structure

I355602 — Mon, 23 Mar 2009 04:16:14 GMT

Hi,

Refer:

https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_wiki&query=dynamicinternaltable&adv=false&sortby=cm_rnd_rankvalue

Hope this helps you.

Regards,

Tarun

Re: dynamic internal table structure

Former Member — Mon, 23 Mar 2009 04:35:29 GMT

Hi Ian,

Let me know specificly in which part are u facing problem so that i can elaborate more.....

Thanks & Regards,

Ruchi Tiwari

Re: dynamic internal table structure

Former Member — Mon, 23 Mar 2009 04:55:49 GMT

Hi,

u can make a dynamic internal table with unlimited fields.

check this code.


DATA: struct_type TYPE REF TO cl_abap_structdescr,
      comp_tab    TYPE cl_abap_structdescr=>component_table,
      dref        TYPE REF TO data,
      itab_type   TYPE REF TO cl_abap_tabledescr,
      wa_comp     LIKE LINE OF comp_tab,
      index       TYPE char10.

FIELD-SYMBOLS : <tab> TYPE STANDARD TABLE,
                <wa> TYPE ANY.

PARAMETER col TYPE i.

"Here u have to define the fields of the internal table.
DO col TIMES.
  index = sy-index.
  CONCATENATE 'COL' index INTO wa_comp-name.                       "Field name
  CONDENSE wa_comp-name NO-GAPS.
  wa_comp-type ?= cl_abap_datadescr=>describe_by_name( 'I' ).     "Field data type
  APPEND  wa_comp TO comp_tab.
ENDDO.

struct_type = cl_abap_structdescr=>create( comp_tab ).
itab_type   = cl_abap_tabledescr=>create( struct_type ).
CREATE DATA dref TYPE HANDLE itab_type.
ASSIGN dref->* TO <tab>.                                 "This is the dynamic Internal table
CREATE DATA dref TYPE HANDLE struct_type.
ASSIGN dref->* TO <wa>.                                  "This is the work area for the above table.

set debugger and see..

Re: dynamic internal table structure

Former Member — Thu, 26 Mar 2009 04:30:56 GMT

hi Sukriti,

how am i going to put values to the work area or table?

Re: dynamic internal table structure

Former Member — Thu, 26 Mar 2009 04:36:29 GMT

Hi,

Kindly go through these below threads:

https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/creating%252bflat%252band%252bcomplex%252binternal%252btables%252bdynamically%252busing%252brtti

/people/subramanian.venkateswaran2/blog/2004/11/19/dynamic-internal-table

Hope it helps

Regards

Mansi

Re: dynamic internal table structure

Former Member — Thu, 26 Mar 2009 04:38:20 GMT

Hi,

Do like this....


FIELD-SYMBOLS: <fs> TYPE any.


LOOP AT comp_tab INTO wa_comp.
  ASSIGN COMPONENT wa_comp-name OF STRUCTURE <wa> TO <fs>.       "<---get by field name
  IF <fs> IS ASSIGNED.
    <fs> = value.           "<----Value
    UNASSIGN <fs>.
  ENDIF.
ENDLOOP.

Re: dynamic internal table structure

I355602 — Thu, 26 Mar 2009 04:44:34 GMT

Hi,

Refer wiki code for sample dynamic internal table

https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/sample%252b%252bdynamic%252binternal%252btable

Hope this helps you.

Regards,

Tarun

Re: dynamic internal table structure

Former Member — Thu, 26 Mar 2009 05:27:10 GMT

sorry, but i still dont know how those values to work area and then to internal table and what if i have 10 fields to put values in for example?

Edited by: lan sdng on Mar 26, 2009 6:43 AM

Re: dynamic internal table structure

I355602 — Thu, 26 Mar 2009 05:51:00 GMT

Hi,

Have a look at this wiki code:

https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/creating%252ba%252bdynamic%252binternal%252btable%252bbased%252bon%252bdata

Regards,

Tarun

Re: dynamic internal table structure

Former Member — Thu, 26 Mar 2009 05:58:37 GMT


FIELD-SYMBOLS: <fs> TYPE any.
  
LOOP AT comp_tab INTO wa_comp.
  ASSIGN COMPONENT wa_comp-name OF STRUCTURE <wa> TO <fs>.       "<---get by field name
  IF <fs> IS ASSIGNED.
    <fs> = value.           "<----Value
    UNASSIGN <fs>.
  ENDIF.
ENDLOOP.

the field names r stored in the table 'comp_tab'.

so looping at this table gives u all the components of the work area. as <wa> is assigned type ANY. so u cannot get the field names diretly..eg. <wa>-fld_name.

so u have to do like this....

ASSIGN COMPONENT wa_comp-name OF STRUCTURE <wa> TO <fs>.

here u re taking one field 'wa_comp-name' at a time, and is being assigned to <fs>. now u can put values into <fs> which refers to a field of <wa> at runtime.

U can check with debugger....

at the end of loop use APPEND <wa> to <tab>.

so if u want to pu values from an internal table to this dynamic tabe...use like this...


FIELD-SYMBOLS: <fs_wa> TYPE any,
            <fs1> type any.

LOOP at itab ASSIGNING <fa_wa>.  
  LOOP AT comp_tab INTO wa_comp.
    ASSIGN COMPONENT wa_comp-name OF STRUCTURE <wa> TO <fs>.       "<---get by field name
    ASSIGN COMPONENT wa_comp-name OF STRUCTURE <fs_wa> TO <fs1>.       "<---get by field name
    IF <fs> IS ASSIGNED.
      <fs> = <fs1>.           "<----Value
      UNASSIGN <fs>.
    ENDIF.
  ENDLOOP.
  APPEND <WA> to <dyn_tab>.
ENDLOOP.

Re: dynamic internal table structure

Former Member — Thu, 26 Mar 2009 08:01:13 GMT

how come the values does not appear in the internal table if i do this?

LOOP AT comp_tab INTO wa_comp.

ASSIGN COMPONENT wa_comp-name OF STRUCTURE <wa> TO <fs>.

IF <fs> IS ASSIGNED.

<fs> = 1.

ENDIF.

ENDLOOP.

APPEND <wa> TO <tab>.

Re: dynamic internal table structure

Former Member — Thu, 26 Mar 2009 08:34:04 GMT

ur code is OK. values are entering in the table....