topic Re: F4IF_INT_TABLE_VALUE_REQUEST help in Application Development and Automation Discussions

F4IF_INT_TABLE_VALUE_REQUEST help

Former Member — Thu, 26 Mar 2009 08:32:40 GMT

hi,

I have a table of 2 values ( WBS and project definition code ) , I used this function F4IF_INT_TABLE_VALUE_REQUEST for F4 on the project definition field. After that I want to return both Project definition and WBS that I've selected . I used value_org = 'S" but I can get only 1 record in the return_table ? Could you please help me?

Thanks in advance

Re: F4IF_INT_TABLE_VALUE_REQUEST help

Former Member — Thu, 26 Mar 2009 08:42:17 GMT

Hi,

Check this Code..

F4 help is povided on the P_PLNNR field and if any data is selected then P_PLNNR and P_PLNAL is updated in the screen. Both values are shown in the F4 help(P_PLNNR and P_PLNAL ).

PARAMETES : p_werks type ...
PARAMETES : p_plnnr type ....
PARAMETES : p_plnal type....
 
 
AT SELECTION-SCREEN ON P_PLNNR.
 
  data:
    lg_condition    type string.

  data:
     lwa_ddshretval type ddshretval,
     lwa_dselc      type dselc,
     lwa_dynpread   type dynpread.
  data:
     li_f4_insp     type standard table of t_f4_insp,
     li_ddshretval  type standard table of ddshretval,
     li_dselc       type standard table of dselc,
     li_dynpread    type standard table of dynpread.


  lwa_dynpread-fieldname = 'P_WERKS'.
  append lwa_dynpread to li_dynpread.
  clear lwa_dynpread.
* Read Screen Field Values.
  call function 'DYNP_VALUES_READ'
    exporting
      dyname     = sy-repid
      dynumb     = sy-dynnr
    tables
      dynpfields = li_dynpread.

* Read the first record as only one record will be present
  read table li_dynpread into lwa_dynpread index 1.
  p_werks = lwa_dynpread-fieldvalue.

  if p_werks is initial.
    move 'PLNTY EQ ''Q''' to lg_condition.
  else.
    move 'WERKS EQ P_WERKS AND PLNTY EQ ''Q''' to lg_condition.
  endif.

* Fetch Data
  select werks
         plnnr
         plnal
         plnty
         ktext
    into table li_f4_insp
    from plko
    where (lg_condition).

  lwa_dselc-fldname = 'F0002'.
  lwa_dselc-dyfldname = 'PLNNR'.
  append lwa_dselc to li_dselc.
  clear lwa_dselc.
  lwa_dselc-fldname = 'F0003'.
  lwa_dselc-dyfldname = 'PLNAL'.
  append lwa_dselc to li_dselc.
  clear lwa_dselc.
* FM For F4 Help
  call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield        = 'PLNNR'
      dynpprog        = sy-cprog
      dynpnr          = sy-dynnr
      dynprofield     = 'PLNNR'
      value_org       = 'S'
    tables
      value_tab       = li_f4_insp
      return_tab      = li_ddshretval
      dynpfld_mapping = li_dselc
    exceptions
      parameter_error = 1
      no_values_found = 2
      others          = 3.

  if sy-subrc eq 0.
    refresh li_dynpread.
    read table li_ddshretval into lwa_ddshretval index 1.
    if sy-subrc eq 0.
      move lwa_ddshretval-fieldval to p_plnnr.
      lwa_dynpread-fieldname = 'P_PLNNR'.
      lwa_dynpread-fieldvalue = lwa_ddshretval-fieldval.
      append lwa_dynpread to li_dynpread.
      clear lwa_dynpread.
    endif.                             " IF sy-subrc EQ 0.
    read table li_ddshretval into lwa_ddshretval index 2.
    if sy-subrc eq 0.
      move lwa_ddshretval-fieldval to p_plnal.
      lwa_dynpread-fieldname = 'P_PLNAL'.
      lwa_dynpread-fieldvalue = lwa_ddshretval-fieldval.
      append lwa_dynpread to li_dynpread.
      clear lwa_dynpread.
    endif.                             " IF sy-subrc EQ 0.
  endif.                               " IF sy-subrc EQ 0.

* Set Screen Field Values.
  call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname               = sy-repid
      dynumb               = sy-dynnr
    tables
      dynpfields           = li_dynpread
    exceptions
      invalid_abapworkarea = 1
      invalid_dynprofield  = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription  = 6
      undefind_error       = 7
      others               = 8.

  check sy-subrc eq 0.

Re: F4IF_INT_TABLE_VALUE_REQUEST help

I355602 — Thu, 26 Mar 2009 08:44:05 GMT

Hi,

Refer this demo code to get a S.help for BELNR based on user input for BUKRS:-


PARAMETERS : p_belnr TYPE belnr,
             p_bukrs TYPE bukrs.
 
DATA : BEGIN OF itab OCCURS 0,
         belnr TYPE belnr,
       END OF itab.
 
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_belnr.
 
  PERFORM f4_belnr_help USING p_belnr.
 
*&---------------------------------------------------------------------*
*&      Form  f4_belnr_help
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*      -->P_BELNR text
*----------------------------------------------------------------------*
FORM f4_belnr_help USING p_belnr.
 
  DATA : itab TYPE STANDARD TABLE OF it WITH HEADER LINE,
         tb_dynpfields LIKE dynpread OCCURS 0 WITH HEADER LINE,
         v_bukrs TYPE bukrs.
 
  CLEAR:   tb_dynpfields.
  REFRESH: tb_dynpfields.
 
  MOVE 'P_BUKRS' TO tb_dynpfields-fieldname.
  APPEND tb_dynpfields.
 
  CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname                               = 'Z_F4' "program name
      dynumb                               = '1000' "screen number
    TABLES
      dynpfields                           = tb_dynpfields
    EXCEPTIONS
      INVALID_ABAPWORKAREA                 = 1
      INVALID_DYNPROFIELD                  = 2
      INVALID_DYNPRONAME                   = 3
      INVALID_DYNPRONUMMER                 = 4
      INVALID_REQUEST                      = 5
      NO_FIELDDESCRIPTION                  = 6
      INVALID_PARAMETER                    = 7
      UNDEFIND_ERROR                       = 8
      DOUBLE_CONVERSION                    = 9
      STEPL_NOT_FOUND                      = 10
      OTHERS                               = 11.
 
  IF sy-subrc  0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  ENDIF.
 
  READ TABLE tb_dynpfields INDEX 1.
  IF sy-subrc EQ 0.
    v_bukrs = tb_dynpfields-fieldvalue.
  ENDIF.
 
  SELECT belnr from <db_table> INTO TABLE itab WHERE bukrs = v_bukrs.
  CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield               = 'BELNR' "internal table field
      dynpprog               = 'Z_F4' "program name
      dynpnr                 = '1000' "screen number
      dynprofield            = 'P_BELNR' "screen field name
      value_org              = 'S'
    TABLES
      value_tab              = itab "internal table
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3.
 
  IF sy-subrc  0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  ENDIF.
 
ENDFORM.                    " f4_belnr_help

Hope this helps you.

Regards,

Tarun

Re: F4IF_INT_TABLE_VALUE_REQUEST help

Former Member — Thu, 26 Mar 2009 08:48:02 GMT

Hi,

Please refer this thread:

Hope it helps

Regards

Mansi