topic Re: coding problem in a user exit for unit conversion please see it once in Application Development and Automation Discussions

coding problem in a user exit for unit conversion please see it once

Former Member — Fri, 06 Feb 2009 11:27:23 GMT

Hi experts,

i am having a problem in coding i wont to convert the MSEG-ERFME field that is quantity field into tonne when ever it is kg. In tcode j1i5 i got one user exit J_1i7_userexit_validate now inside this user exit i have to write this code that when ever the UOM(unit of measure)ERFME comes in KG it should be converted into TONNE, This code is to be written in the user exit and has to be followed forward in other values.

Thanks

sumeet Malhotra

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Fri, 06 Feb 2009 11:32:19 GMT

Hi,

You need to convert the unit into the internal format to check for the UOM..

use the below FM :

CONVERSION_EXIT_CUNIT_INPUT Conversion exit for commercial (3-char) measurement unit INPUT

CONVERSION_EXIT_CUNIT_OUTPUT Conversion exit for commercial (3-char) measurement unit OUTPUT

Regardss

Shiva

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Fri, 06 Feb 2009 11:41:54 GMT

Hi,

Try out this link may be helpful.

Regards,

jaya

Re: coding problem in a user exit for unit conversion please see it once

viquar_iqbal — Fri, 06 Feb 2009 11:43:06 GMT

You can use these function modules to convert measurements

BKKT_BKKTERM_CONVERT_TERMUNIT

BKKT_BKKTERM_CONVERT_UNIT

UNIT_CONVERSION_SIMPLE

convert weights from one UOM to another.

Thanks

Viquar Iqbal

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Fri, 06 Feb 2009 11:55:31 GMT

Hi experts,

well my main concern is to convert UOM into Tonne When ever it is KG or divide The Kg By 1000 ultimately it should be in tonne

Regards

Sumeet malhotra

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Fri, 06 Feb 2009 15:03:07 GMT

Hi Experts,

I am now using the functional module UNIT_CONVERSION_SIMPLE have any one used it first,if yes please provide with the samples. i have to convert tones into kg.

regards

Sumeet Malhotra

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Sat, 07 Feb 2009 04:15:58 GMT

Hi Experts,

Have any one used this Function module unit_conversion_simple please help Not getting any reply since tmmrow,I am not able to get the desired output wont to convert all KG inputs into Tonne.

this is the code part

CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'

EXPORTING

INPUT = ERFMG " QUANTITY

NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '

UNIT_IN = ERFME " ORIGINAL UOM WHICH EXIST

UNIT_OUT = 'TO' " UOM REQUIRED

IMPORTING

ADD_CONST =
DECIMALS =
DENOMINATOR = 1000
NUMERATOR =

OUTPUT = RESULT "OUTPUT

EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10

.
IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

Please help

Thanks

Edited by: sumeet malhotra on Feb 7, 2009 5:46 AM

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Sat, 07 Feb 2009 04:50:39 GMT

Hi Summet

There is a problem with the UNIT fm you specified .

It always considers numeric values for the input field as character and throws error

try using CF_UT_UNIT_CONVERSION

Give your quantity in VALUE_OLD_IMP

, UNIT_NEW_IMP as TON

and UNIT_OLD_IMP as KG.

Use the above Fm after checking if the unit is 'KG'.

Edited by: Martina Floriette on Feb 7, 2009 5:52 AM

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Sat, 07 Feb 2009 05:00:32 GMT

Hi,

The function module cf_ut_unit_conversionis having first two fields of matnr and meins but i am using table mseg where i am having quantity in mseg_erfmg and unit in Mseg-erfme would it work in this case Plus i am going to call this function module inside a user exit .

EXPORTING

MATNR_IMP = ' '
MEINS_IMP = ' '

Please reply.

Thanks

Sumeet Malhotra

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Sat, 07 Feb 2009 05:08:20 GMT

Hi sumeet,

The first two fields are not mandatory .

So jus ignore those fields and proceed further ...

If any issues let me know i d send the code

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Sat, 07 Feb 2009 05:21:50 GMT

Hi,

I just left the first two field and the code is as follow.

CALL FUNCTION 'CF_UT_UNIT_CONVERSION'

EXPORTING

MATNR_IMP = MATNR
MEINS_IMP = MEINS

UNIT_NEW_IMP = 'TO'

UNIT_OLD_IMP = 'KG'

VALUE_OLD_IMP = ERFMG

IMPORTING

VALUE_NEW_EXP = ERFMG

EXCEPTIONS
OVERFLOW = 1
OTHERS = 2

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

But when i execute it an error is coming stating Value_old_imp the field rerfmg is of differnt field type.

I am applying this code in j1i5 tcode under the user exit j_1i7_userexit_j1i5_validate for converting the quantity.

Please See it Once.

Thanks

Sumeet Malhotra

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Sat, 07 Feb 2009 05:26:27 GMT

HI sumeet,

Try receiving the output in the datatype of the fm field output and then assign the value to your ERFMG field

after you exit your fm .

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Sat, 07 Feb 2009 05:33:05 GMT

Hi Sumeet,

Try to check 'Where used list' in ABAP Editor.

May be you get some programs where this FM is used.

Regards,

Amit

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Sat, 07 Feb 2009 05:42:28 GMT

Hi,

Again same problem can you just see it by applying to j1i5 that it works or not i assigned the output type to a data type but still same error.

CALL FUNCTION 'CF_UT_UNIT_CONVERSION'

EXPORTING

MATNR_IMP = MATNR
MEINS_IMP = MEINS

UNIT_NEW_IMP = 'TO'

UNIT_OLD_IMP = 'KG'

VALUE_OLD_IMP = ERFMG

IMPORTING

VALUE_NEW_EXP = RESULT "This is defined in the export parameter result like mseg-erfmg

EXCEPTIONS
OVERFLOW = 1
OTHERS = 2

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

RESULT = T_MSEG-ERFMG.

Thanks

Sumeet Malhotra

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Sat, 07 Feb 2009 11:36:24 GMT

Hi Martina,

Solved the problem by hardcoding it the function module works in some case but gives problem in certain cases finally solved it,rewarding points

Thanks

Sumeet Malhotra

Re: coding problem in a user exit for unit conversion please see it once

Former Member — Mon, 09 Feb 2009 03:35:17 GMT

Hi Sumeet,

Sorry that I was not availbale the other day ....

Could you jus post the code what u ve done to solve that uncertainity problem

and congrats on solving it