Validation for BDC program

Former Member — Mon, 09 Feb 2009 11:15:19 GMT

hi,

In BDC programe I have to check (or) validate the file path at selection screen events .

if the selected file is wrong error message should be triggered. how i can do this.

with regards,

Srinath

Re: Validation for BDC program

Former Member — Mon, 09 Feb 2009 11:20:02 GMT

Hi,

anyway u will call the functuon module to upload the file in the program..there at the end

of function module just write like this....

if sy-subrc NE 0.

message 'File Not Found' type 'S' display like 'E'.

endif.

Regards

Kiran

Edited by: Kiran Saka on Feb 9, 2009 12:33 PM

Re: Validation for BDC program

Former Member — Mon, 09 Feb 2009 11:20:55 GMT

If you are uploading the file from application server, use open dataset statment and if it returns sy-subrc 0, then the file exists.

Otherwise if you are uploading the file from front end, use the method FILE_EXIST of class cl_gui_frontend_service to check if the file exists.

Do this at the event AT SELECTION-SCREEN ON parameter_name

regards,

Advait

Edited by: Advait Gode on Feb 9, 2009 12:21 PM

Re: Validation for BDC program

Former Member — Mon, 09 Feb 2009 11:22:40 GMT

Hello Reddy,

In the following example,

purchase order fields are taken in through a text-file, if the fields do not match the fields of internal table, then just throw an error in GUI_UPLOAD saying , 'FILE CANNOT BE UPLOADED' or say 'UPLOADING FAILED'.


*---------------------------------------------------------------------*
* STRUCTURE FOR PURCHASE ORDER TABLE                                  *
*---------------------------------------------------------------------*
TYPES:
  BEGIN OF type_s_mat,
    eeind TYPE rm06b-eeind,            " Delivery Date
    txz01 TYPE eban-txz01,             " Short Text
    menge TYPE eban-menge,             " Quantity
    meins TYPE eban-meins,             " Units
    preis TYPE eban-preis,             " Price
  END OF type_s_mat.                   " BEGIN OF TYPE_S_MAT

*---------------------------------------------------------------------*
* FIELD STRING FOR PURCHASE ORDER TABLE                               *
*---------------------------------------------------------------------*
DATA:
  fs_mat TYPE type_s_mat.

*---------------------------------------------------------------------*
* INTERNAL TABLE FOR PURCHASE ORDER TABLE                             *
*---------------------------------------------------------------------*
DATA:
     t_mat LIKE
  STANDARD TABLE
        OF fs_mat.

*---------------------------------------------------------------------*
* INTERNAL TABLE FOR BATCH DATA TRANSFER                              *
*---------------------------------------------------------------------*
DATA:
     t_bdc TYPE
  STANDARD TABLE
        OF bdcdata
      WITH HEADER LINE.

*---------------------------------------------------------------------*
* INTERNAL TABLE FOR MESSAGES                                         *
*---------------------------------------------------------------------*
DATA:
t_messages TYPE
  STANDARD TABLE
        OF bdcmsgcoll
      WITH HEADER LINE.

*---------------------------------------------------------------------*
* Work Variables                                                      *
*---------------------------------------------------------------------*
DATA:
  w_filename TYPE rlgrap-filename,     " Selected File-Name
  w_msg(72) TYPE c,                    " Messages
  w_filename1 TYPE string.             " Full-Path

*---------------------------------------------------------------------*
*      INITIALIZATION                                                 *
*---------------------------------------------------------------------*
INITIALIZATION.
  PARAMETERS p_file(128).              " Name of File to be opened

*---------------------------------------------------------------------*
*      AT SELECTION-SCREEN ON VALUE-REQUEST                           *
*---------------------------------------------------------------------*
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
  PERFORM open_mat_file.
  p_file = w_filename.

*---------------------------------------------------------------------*
*      START-OF-SELECTION                                             *
*---------------------------------------------------------------------*
START-OF-SELECTION.
  IF p_file IS INITIAL.
    MESSAGE 'No File Selected' TYPE 'S' DISPLAY LIKE 'E'.
  ELSE.
    PERFORM open_file.
  ENDIF.                               " IF P_FILE IS INITIAL

*&---------------------------------------------------------------------*
*&      Form  open_mat_file
*&---------------------------------------------------------------------*
* This Subroutine opens Material File of the Presentation Server.
*----------------------------------------------------------------------*
* This Subroutine has got no Interface Parameters.
*----------------------------------------------------------------------*
FORM open_mat_file .
  CALL FUNCTION 'F4_FILENAME'
* EXPORTING
*   PROGRAM_NAME        = SYST-CPROG
*   DYNPRO_NUMBER       = SYST-DYNNR
*   FIELD_NAME          = ' '
   IMPORTING
     file_name          = w_filename.
ENDFORM.                               " FORM OPEN_MAT_FILE

*&---------------------------------------------------------------------*
*&      Form  open_file
*&---------------------------------------------------------------------*
* This Subroutine facilitates file upload on Presentation Server.
*----------------------------------------------------------------------*
* This Subroutine has got no Interface Parameters.
*----------------------------------------------------------------------*
FORM open_file .
  w_filename1 = w_filename.
  CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
     filename                      =  w_filename1
     filetype                      = 'ASC'
*     has_field_separator           = ' '
*    HEADER_LENGTH                 = 0
*    READ_BY_LINE                  = 'X'
*    DAT_MODE                      = ' '
*    CODEPAGE                      = ' '
*    IGNORE_CERR                   = ABAP_TRUE
*    REPLACEMENT                   = '#'
*  IMPORTING
*    FILELENGTH                    =
*    HEADER                        =
    TABLES
      data_tab                     = t_mat
   EXCEPTIONS
     file_open_error               = 1
     file_read_error               = 2
     no_batch                      = 3
     gui_refuse_filetransfer       = 4
     invalid_type                  = 5
     no_authority                  = 6
     unknown_error                 = 7
     bad_data_format               = 8
     header_not_allowed            = 9
     separator_not_allowed         = 10
     header_too_long               = 11
     unknown_dp_error              = 12
     access_denied                 = 13
     dp_out_of_memory              = 14
     disk_full                     = 15
     dp_timeout                    = 16
     OTHERS                        = 17
            .
  IF sy-subrc <> 0.
    MESSAGE 'Uploading Failed'  TYPE 'S' DISPLAY LIKE 'E'.
  ELSE.
    PERFORM populating_bdc.
  ENDIF.                               " IF SY-SUBRC NE 0
ENDFORM.                               " FORM OPEN_FILE

*&---------------------------------------------------------------------*
*&      Form  populating_bdc
*&---------------------------------------------------------------------*
* This Subroutine Populates data in Transaction ME51
*----------------------------------------------------------------------*
* This Subroutine has got no Interface Parameters.
*----------------------------------------------------------------------*
FORM populating_bdc .
  LOOP AT t_mat INTO fs_mat.
    PERFORM screens USING 'SAPMM06B' '0100'.
    PERFORM fields USING 'EBAN-BSART' 'NB'.
    PERFORM fields USING 'EBAN-KNTTP' 'X'.
    PERFORM fields USING 'RM06B-LPEIN' 'T'.
    PERFORM fields USING 'RM06B-EEIND' fs_mat-eeind.
    PERFORM fields USING 'EBAN-WERKS' '1000'.
    PERFORM fields USING 'EBAN-EKGRP' '100'.
    PERFORM fields USING 'EBAN-MATKL' '006'.
    PERFORM fields USING 'BDC_OKCODE' '/00'.

    PERFORM screens USING 'SAPMM06B' '0106'.
    PERFORM fields USING 'EBAN-TXZ01' fs_mat-txz01.
    PERFORM fields USING 'EBAN-MENGE' fs_mat-menge.
    PERFORM fields USING 'EBAN-MEINS' fs_mat-meins.
    PERFORM fields USING 'BDC_OKCODE' '/00'.

    PERFORM screens USING 'SAPMM06B' '0102'.
    PERFORM fields USING 'EBAN-PREIS' fs_mat-preis.
    PERFORM fields USING 'BDC_OKCODE' '/00'.

    PERFORM screens USING 'SAPMM06B' '0505'.
    PERFORM fields USING 'COBL-KOSTL' '1000'.
    PERFORM fields USING 'BDC_OKCODE' '/00'.

    PERFORM screens USING 'SAPMM06B' '0106'.
    PERFORM fields USING 'BDC_OKCODE' 'BU'.

    CALL TRANSACTION 'ME51' USING t_bdc MODE 'A' MESSAGES INTO
    t_messages.
    IF sy-subrc EQ 0.
      LOOP AT t_messages.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id        = t_messages-msgid
            lang      = sy-langu
            no        = t_messages-msgnr
            v1        = t_messages-msgv1
            v2        = t_messages-msgv2
            v3        = t_messages-msgv3
            v4        = t_messages-msgv4
          IMPORTING
            msg       = w_msg
          EXCEPTIONS
            not_found = 1
            OTHERS    = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          WRITE:/ w_msg.
        ENDIF.                         " IF SY-SUBRC <> 0
      ENDLOOP.                         " LOOP AT T_MAT INTO FS_MAT
    ENDIF.                             " IF SY-SUBRC EQ 0
  ENDLOOP.                             " LOOP T_MAT INTO FS_MAT
ENDFORM.                               " FORM POPULATING_BDC

*&---------------------------------------------------------------------*
*&      Form  screens
*&---------------------------------------------------------------------*
* This Subroutine populates program name and screen numbers.
*----------------------------------------------------------------------*
*      -->VALUE(P_PROG)   PROGRAM NAME
*      -->VALUE(P_SCRNO)  SCREEN NUMBER
*----------------------------------------------------------------------*
FORM screens USING value(p_prog) value(p_scrno).
  t_bdc-program = p_prog.
  t_bdc-dynpro = p_scrno.
  t_bdc-dynbegin = 'X'.
  APPEND t_bdc.
ENDFORM.                               " FORM SCREENS

*&---------------------------------------------------------------------*
*&      Form  fields
*&---------------------------------------------------------------------*
* This Subroutine populates Field Value and Field name
*----------------------------------------------------------------------*
*      -->VALUE(P_FNAM)  Field Name
*      -->VALUE(P_FVAL)  Field Value
*----------------------------------------------------------------------*
FORM fields USING value(p_fnam) value(p_fval).
  t_bdc-fnam = p_fnam.
  t_bdc-fval = p_fval.
  APPEND t_bdc.
ENDFORM.                               " FORM FIELDS

Hope the above given example, helps you.

Thanks: Zahackson

Re: Validation for BDC program

Former Member — Mon, 09 Feb 2009 11:30:41 GMT

Hi srinath,

AT SELECTION-SCREEN ON  p_file.

call function 'f4_filename'
.....
if sy-subrc <> 0.
  message 'Error in File' type 'E'.
endif.

Regards,

Sravanthi

topic Re: Validation for BDC program in Application Development and Automation Discussions

Validation for BDC program

Re: Validation for BDC program

Re: Validation for BDC program

Re: Validation for BDC program

Re: Validation for BDC program