topic problem P+ logic in bdc in Application Development and Automation Discussions

problem P+ logic in bdc

Former Member — Thu, 11 Dec 2008 08:16:25 GMT

Hi,

I am working on a BDC for tcode MM01 in which maintainanace of Qauality Managment View is to be maintained but the problem is when i select the view of Quality Managment ('MSICHTAUSW-DYTXT(22)) which is present in view selection at number 22 where as when i specify the number 17 it picks up the Work Scheduling view and i want to select the QM view which is at number 22.

It gives the error screen does not exist but i had selected that view during recording.

Plz provide me guidelines for solving this problem.

Re: problem P+ logic in bdc

tarangini_katta — Thu, 11 Dec 2008 08:21:41 GMT

Hi rick,

just go thoruogh this example it may helpful to you.

DATA: BEGIN OF itab OCCURS 0,

matnr TYPE mara-matnr,

mbrsh TYPE mara-mbrsh,

mtart TYPE mara-mtart,

END OF itab.

DATA: x_file TYPE string.

DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.

messages of call transaction

DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.

PARAMETER s_file TYPE rlgrap-filename.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_file.

CALL FUNCTION 'KD_GET_FILENAME_ON_F4'

CHANGING

file_name = s_file.

IF s_file IS INITIAL.

MESSAGE 'Please give a proper file path' TYPE 'E'.

ENDIF.

x_file = s_file.

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

filename = x_file

filetype = 'ASC'

has_field_separator = 'X'

TABLES

data_tab = itab.

START-OF-SELECTION.

LOOP AT itab.

REFRESH bdcdata.

PERFORM open_group.

PERFORM bdc_dynpro USING 'SAPLMGMM' '0060'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RMMG1-MTART'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'RMMG1-MATNR'

itab-matnr.

PERFORM bdc_field USING 'RMMG1-MBRSH'

itab-mbrsh.

PERFORM bdc_field USING 'RMMG1-MTART'

itab-mtart.

PERFORM bdc_dynpro USING 'SAPLMGMM' '0070'.

PERFORM bdc_field USING 'BDC_CURSOR'

'MSICHTAUSW-DYTXT(22)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

PERFORM bdc_field USING 'MSICHTAUSW-KZSEL(01)'

'X'.

PERFORM bdc_dynpro USING 'SAPLMGMM' '4004'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'MAKT-MAKTX'

'Finished Product'.

PERFORM bdc_field USING 'BDC_CURSOR'

'MARA-MEINS'.

PERFORM bdc_field USING 'MARA-MEINS'

'ea'.

PERFORM bdc_field USING 'MARA-MTPOS_MARA'

'NORM'.

PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=YES'.

PERFORM bdc_transaction USING 'MM01'.

PERFORM close_group.

CALL TRANSACTION 'MM01'

USING bdcdata

MODE 'N'

UPDATE 'A'

MESSAGES INTO messtab.

CLEAR itab.

ENDLOOP.

END-OF-SELECTION.

LOOP AT messtab.

WRITE: / messtab-msgtyp.

ENDLOOP.

&----

*& Form BDC_DYNPRO

&----

text

-->PROGRAM text

-->DYNPRO text

FORM bdc_dynpro USING program dynpro.

CLEAR bdcdata.

bdcdata-program = program.

bdcdata-dynpro = dynpro.

bdcdata-dynbegin = 'X'.

APPEND bdcdata.

ENDFORM. "BDC_DYNPRO

Insert field *

FORM bdc_field USING fnam fval.

IF FVAL NODATA.

CLEAR bdcdata.

bdcdata-fnam = fnam.

bdcdata-fval = fval.

APPEND bdcdata.

ENDIF.

ENDFORM. "BDC_FIELD

Re: problem P+ logic in bdc

Former Member — Thu, 11 Dec 2008 08:58:21 GMT

Hi Ricx,

Check the below code. as we are doing 'P+' for capturing the 22 view, the 'MSICHTAUSW-KZSEL' number resets from 01.


PERFORM bdc_dynpro      USING 'SAPLMGMM' '0060'.

  PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
  PERFORM bdc_field       USING 'RMMG1-MATNR'
                                '100000141'.
*  PERFORM bdc_field       USING 'RMMG1-MBRSH'
*                                'P'.
*  PERFORM bdc_field       USING 'RMMG1-MTART'
*                                'ROH'.
  PERFORM bdc_field       USING 'RMMG1_REF-MATNR'
                                '100000121'.
  PERFORM bdc_dynpro      USING 'SAPLMGMM' '0070'.

  PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=RESA'.
  PERFORM bdc_dynpro      USING 'SAPLMGMM' '0070'.

  PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=P+'.

  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(04)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(05)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(06)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(09)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(10)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(12)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(13)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(14)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(15)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(17)'
                                'X'.
  PERFORM bdc_dynpro      USING 'SAPLMGMM' '0070'.

  PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=ENTR'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(01)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(04)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(05)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(06)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(07)'
                                'X'.
  PERFORM bdc_field       USING 'MSICHTAUSW-KZSEL(08)'
                                'X'.

Re: problem P+ logic in bdc

Former Member — Thu, 11 Dec 2008 09:10:46 GMT

Use BDC recording ->

SAPLMGMM | 0060

BDC_CURSOR | RMMG1-MATNR

BDC_OKCODE | =ENTR

RMMG1-MATNR | 2287043447

SAPLMGMM | 0070

BDC_CURSOR | MSICHTAUSW-DYTXT(17)

BDC_CURSOR | MSICHTAUSW-DYTXT(18)

BDC_OKCODE | =ENTR

MSICHTAUSW-KZSEL(18) | X "-> for QM view.

Regards,

Aparna

Re: problem P+ logic in bdc

Former Member — Thu, 11 Dec 2008 09:32:08 GMT

hi,

i had solved the problem by doing the new recording and it is working and thanks a lot for all your help.