pf status

Former Member — Sun, 07 Dec 2008 06:09:25 GMT

Hi ,

I have created customized pf status for my report. When I am running the report , pf status is not shown in the result. But when I tested the pf status, it is working . I have passed the exact form name of pf status to the Reuse_alv_grid_display fm.Please explain.

Regards,

Khadeer.

Re: pf status

Former Member — Sun, 07 Dec 2008 06:18:50 GMT

Pf status should be active status and must use in CAPS in report.

Re: pf status

Former Member — Sun, 07 Dec 2008 06:19:13 GMT

Make sure you are passing the form name in capital letters .

Neha

Edited by: Neha Shukla on Dec 7, 2008 11:49 AM

Re: pf status

MarcinPciak — Sun, 07 Dec 2008 12:01:23 GMT

It is possible to test an inactive GUI status, but not possible to use it in a program, unless it is activated. Therefore please also ensure you have done this.

Regards

Marcin

Re: pf status

vijy_mukunthan — Sun, 07 Dec 2008 13:56:19 GMT

Hi Khadeer

You should enter the PF status in CAPTIAL LETTER and goto SE80 t-code enter your program name and rite click and say activate all the program associate to this will get active. Try this.

Regards

vijay

Re: pf status

I355602 — Mon, 08 Dec 2008 03:57:06 GMT

Hi Khadeer Basha,

Firstly make sure that your PF-Status is activated.

Then make sure that you have written the name within quotes in capitals.

This is a demo code for almost all parameters in 'REUSE_ALV_GRID_DISPLAY'


*&---------------------------------------------------------------------*
*& Report  ZTG_ALV01
*&
*&---------------------------------------------------------------------*
*&
*&
*&---------------------------------------------------------------------*

REPORT  ztg_alv01 MESSAGE-ID zmsg_tg.
*&---------------------------------------------------------------------*
*          TABLES
*&---------------------------------------------------------------------*
TABLES : zekpo.

*&---------------------------------------------------------------------*
*          TYPE POOLS
*&---------------------------------------------------------------------*
TYPE-POOLS : slis.

*&---------------------------------------------------------------------*
*          TYPE DECLARATION
*&---------------------------------------------------------------------*
TYPES : BEGIN OF t_ekpo,
        ebeln TYPE zekpo-ebeln,
        ebelp TYPE zekpo-ebelp,
        matnr TYPE zekpo-matnr,
        werks TYPE zekpo-werks,
        menge TYPE zekpo-menge,
        END OF t_ekpo.

*&---------------------------------------------------------------------*
*          PARAMETERS
*&---------------------------------------------------------------------*
PARAMETERS : s_var TYPE disvariant-variant.

*&---------------------------------------------------------------------*
*          DATA DECLARATION
*&---------------------------------------------------------------------*
*VARIABLES
DATA : check(1),
       rep_id TYPE sy-repid.

*INTERNAL TABLE TYPE OF ZEKPO
DATA : it_ekpo TYPE STANDARD TABLE OF t_ekpo WITH HEADER LINE.

*FIELD CATALOG
DATA : it_field TYPE slis_t_fieldcat_alv,
       wa_field TYPE slis_fieldcat_alv.

*SORTING
DATA : it_sort TYPE slis_t_sortinfo_alv,
       wa_sort TYPE slis_sortinfo_alv.

*FOR TOP OF THE PAGE
DATA : it_top TYPE slis_t_listheader,
       wa_top TYPE slis_listheader.

*FOR END OF THE PAGE
DATA : it_end TYPE slis_t_listheader,
       wa_end TYPE slis_listheader.

*TO CAPTURE EVENTS AND HANDLE
DATA : it_event TYPE slis_t_event,
       wa_event TYPE slis_alv_event.

*FOR GRID TITLE
DATA : wa_title TYPE lvc_title.

*FOR LAYOUT
DATA : wa_layout TYPE slis_layout_alv.

*FOR EXCLUDING STANDARD BUTTON FROM ALV TOOLBAR
DATA : it_exclude TYPE slis_t_extab,
       wa_exclude TYPE slis_extab.

*FOR VARIANT
DATA : wa_variant TYPE disvariant.

*&---------------------------------------------------------------------*
*          INITIALIZATION
*&---------------------------------------------------------------------*
INITIALIZATION.
  check = 'X'.
  rep_id = sy-repid.
  wa_variant-report = sy-repid.
*GET DEFUALT ON THE SELECTION SCREEN FOR DEFAULT DISPLAY
  CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save        = 'A'
    CHANGING
      cs_variant    = wa_variant
    EXCEPTIONS
      wrong_input   = 1
      not_found     = 2
      program_error = 3
      OTHERS        = 4.
  IF sy-subrc = 0.               " IF DEFAULT VARIANT FOUND
    s_var = wa_variant-variant.  " PASS THE DEFAULT VARIANT TO THE SELECTION SCREEN FIELD
  ENDIF.

*&---------------------------------------------------------------------*
*          AT-SELECTION SCREEN ON VALUE REQUEST
*&---------------------------------------------------------------------*
*          TO GET THE F4 HELP FOR VARIANT
*&---------------------------------------------------------------------*
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_var.

  CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant                = wa_variant
*   I_TABNAME_HEADER          =
*   I_TABNAME_ITEM            =
*   IT_DEFAULT_FIELDCAT       =
     i_save                    = 'A'
*   I_DISPLAY_VIA_GRID        = ' '
   IMPORTING
*   E_EXIT                    =
     es_variant                = wa_variant
   EXCEPTIONS
     not_found                 = 1
     program_error             = 2
     OTHERS                    = 3.
  IF sy-subrc = 0.
    s_var = wa_variant-variant. " PASS THE SELECTED VARIANT TO THE SELECTION SCREEN FIELD
  ENDIF.

*&---------------------------------------------------------------------*
*          AT-SELECTION SCREEN
*&---------------------------------------------------------------------*
*          TO CHECK THE EXISTENCE FOR VARIANT
*&---------------------------------------------------------------------*
AT SELECTION-SCREEN.
  wa_variant-variant = s_var.
  CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
    EXPORTING
      i_save        = 'A'
    CHANGING
      cs_variant    = wa_variant
    EXCEPTIONS
      wrong_input   = 1
      not_found     = 2
      program_error = 3
      OTHERS        = 4.
  IF sy-subrc <> 0.
    MESSAGE w001.
  ENDIF.

*&---------------------------------------------------------------------*
*          START OF SELECTION
*&---------------------------------------------------------------------*
START-OF-SELECTION.

  SELECT ebeln
         ebelp
         matnr
         werks
         menge
         FROM zekpo
         INTO TABLE it_ekpo.

*&---------------------------------------------------------------------*
*          FIELD CATALOG
*&---------------------------------------------------------------------*
  wa_field-fieldname = 'EBELN'.
  wa_field-tabname = 'IT_TAB'.
  wa_field-outputlen = 10.
  wa_field-seltext_l = 'PO #'.
  APPEND wa_field TO it_field.
  CLEAR wa_field.

  wa_field-fieldname = 'EBELP'.
  wa_field-tabname = 'IT_TAB'.
  wa_field-outputlen = 10.
  wa_field-seltext_l = 'Line Item'.
  APPEND wa_field TO it_field.
  CLEAR wa_field.

  wa_field-fieldname = 'MATNR'.
  wa_field-tabname = 'IT_TAB'.
  wa_field-outputlen = 15.
  wa_field-seltext_l = 'Material'.
*  wa_field-input = check.
*  wa_field-edit = check.
  APPEND wa_field TO it_field.
  CLEAR wa_field.

  wa_field-fieldname = 'WERKS'.
  wa_field-tabname = 'IT_TAB'.
  wa_field-outputlen = 6.
  wa_field-seltext_l = 'Plant'.
*  wa_field-input = check.
*  wa_field-edit = check.
  APPEND wa_field TO it_field.
  CLEAR wa_field.

  wa_field-fieldname = 'MENGE'.
  wa_field-tabname = 'IT_TAB'.
  wa_field-outputlen = 10.
  wa_field-seltext_l = 'Qty.'.
*  wa_field-input = check.
*  wa_field-edit = check.
  wa_field-do_sum = check.
  APPEND wa_field TO it_field.
  CLEAR wa_field.

*&---------------------------------------------------------------------*
*          SORT W.R.T. PURCHASE ORDER NUMBER
*&---------------------------------------------------------------------*
  wa_sort-spos = 1.
  wa_sort-fieldname = 'EBELN'.
  wa_sort-tabname = 'IT_EKPO'.
  wa_sort-up = check.
  wa_sort-subtot = check.
  APPEND wa_sort TO it_sort.
  CLEAR wa_sort.

*&---------------------------------------------------------------------*
*          FOR GRID TITLE
*&---------------------------------------------------------------------*
  wa_title = 'Hello'.

*&---------------------------------------------------------------------*
*          FOR LAYOUT
*&---------------------------------------------------------------------*
  wa_layout-zebra = check.

*&---------------------------------------------------------------------*
*          FOR EXCLUDING STANDARD BUTTONS FROM ALV TOOLBAR
*&---------------------------------------------------------------------*
  wa_exclude-fcode = '&OUP'.
  APPEND wa_exclude TO it_exclude.
  CLEAR wa_exclude.

  wa_exclude-fcode = '&ODN'.
  APPEND wa_exclude TO it_exclude.
  CLEAR wa_exclude.

  wa_exclude-fcode = '&OAD'.
  APPEND wa_exclude TO it_exclude.
  CLEAR wa_exclude.

*  wa_exclude-fcode = '&AVE'.
*  APPEND wa_exclude TO it_exclude.
*  CLEAR wa_exclude.

  wa_exclude-fcode = '&INFO'.
  APPEND wa_exclude TO it_exclude.
  CLEAR wa_exclude.

*&---------------------------------------------------------------------*
*          POPULATE ALL EVENTS INTO INTERNAL TABLE
*&---------------------------------------------------------------------*
  CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = it_event
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.

  IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
  ENDIF.

  READ TABLE it_event INTO wa_event WITH KEY name = 'END_OF_LIST'.
  wa_event-form = 'END'.
  MODIFY it_event FROM wa_event INDEX sy-tabix.
  CLEAR wa_event.

*&---------------------------------------------------------------------*
*          DISPLAY RECORDS IN ALV GRID
*&---------------------------------------------------------------------*
  CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = rep_id
   i_callback_pf_status_set          = 'PF'
*   i_callback_user_command           = 'COMMAND'
   i_callback_top_of_page            = 'TOP'
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
*   I_BACKGROUND_ID                   = ' '
   i_grid_title                      = wa_title
*   I_GRID_SETTINGS                   =
   is_layout                         = wa_layout
   it_fieldcat                       = it_field
*   it_excluding                      = it_exclude
*   IT_SPECIAL_GROUPS                 =
   it_sort                           = it_sort
*   IT_FILTER                         =
*   IS_SEL_HIDE                       =
*   I_DEFAULT                         = 'X'
   i_save                            = 'A'
   is_variant                        = wa_variant
   it_events                         = it_event
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   I_HTML_HEIGHT_TOP                 = 0
*   I_HTML_HEIGHT_END                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_HYPERLINK                      =
*   IT_ADD_FIELDCAT                   =
*   IT_EXCEPT_QINFO                   =
*   IR_SALV_FULLSCREEN_ADAPTER        =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it_ekpo
 EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2.

  IF sy-subrc <> 0.
  ENDIF.

*&---------------------------------------------------------------------*
*&      Form  top
*&---------------------------------------------------------------------*
*       TO WRITE THE HEADER
*----------------------------------------------------------------------*
FORM top.

  REFRESH it_top.
  wa_top-typ = 'S'.
  wa_top-key = text-001.
  wa_top-info = rep_id.
  APPEND wa_top TO it_top.
  CLEAR wa_top.

  CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = it_top
*   I_LOGO                   =
*   I_END_OF_LIST_GRID       =
*   I_ALV_FORM               =
            .

ENDFORM.                    "top

*&---------------------------------------------------------------------*
*&      Form  end
*&---------------------------------------------------------------------*
*       TO WRITE THE FOOTER
*----------------------------------------------------------------------*
FORM end.

  REFRESH it_end.
  wa_end-typ = 'S'.
  wa_end-key = text-001.
  wa_end-info = rep_id.
  APPEND wa_end TO it_end.
  CLEAR wa_end.

  CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = it_end
*   I_LOGO                   =
*   I_END_OF_LIST_GRID       =
*   I_ALV_FORM               =
            .

ENDFORM.                    "end

*&---------------------------------------------------------------------*
*&      Form  pf
*&---------------------------------------------------------------------*
*       FOR PF-STATUS WITH USER DEFINED BUTTONS
*----------------------------------------------------------------------*
*      -->RT_EXTAB   text
*----------------------------------------------------------------------*
FORM pf USING rt_extab TYPE slis_t_extab.
  SET PF-STATUS 'ZTG_PF_ALV'.
ENDFORM.                    "pf

*&---------------------------------------------------------------------*
*&      Form  command
*&---------------------------------------------------------------------*
*       TO HANDLE USER ACTIONS AGAINST PF-STATUS
*----------------------------------------------------------------------*
*      -->UCOMM      text
*      -->SELFIELD   text
*----------------------------------------------------------------------*
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
  DATA : ok_code TYPE sy-ucomm.
  ok_code = ucomm.
  CASE ok_code.
    WHEN 'T_DOWN'.
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = 'HELLO'
          txt1  = 'USER COMMAND'
          txt2  = 'TOTAL DOWN'.

    WHEN 'DOWN'.
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = 'HELLO'
          txt1  = 'USER COMMAND'
          txt2  = 'DOWN'.

    WHEN 'UP'.
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = 'HELLO'
          txt1  = 'USER COMMAND'
          txt2  = 'UP'.

    WHEN 'T_UP'.
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          titel = 'HELLO'
          txt1  = 'USER COMMAND'
          txt2  = 'TOTAL UP'.

  ENDCASE.
ENDFORM.                    "command

Hope this solves your problem.

Thanks & Regards.

Tarun Gambhir.

topic Re: pf status in Application Development and Automation Discussions

pf status

Re: pf status

Re: pf status

Re: pf status

Re: pf status

Re: pf status