topic Re: BDC Recording HELP in Application Development and Automation Discussions

BDC Recording HELP

abapdeveloper20 — Thu, 16 Oct 2008 07:13:01 GMT

Hi Expert,

I'm new to bdc recording.

The problem i'm facing is during bdc recording of VK11

While VK11 transaction recording after entering the Condtion Type a Popup window is showing with list of radio buttons contains some key combination.

i need to select any one of the radio button and proceed to the next screen.

This scenario is not capturing in BDC recording.

How should i write/Modify the BDC for this???

Any useful inputs on this...

Thanks in advance

Lakshmiraj

Re: BDC Recording HELP

Former Member — Thu, 16 Oct 2008 07:16:03 GMT

just now i tried for that its working fine .. i dont know y u r getting error.

Re: BDC Recording HELP

abapdeveloper20 — Thu, 16 Oct 2008 07:17:38 GMT

this is my code

PERFORM bdc_dynpro USING 'SAPMV13A' '0100'.

PERFORM bdc_field USING 'BDC_CURSOR' 'RV13A-KSCHL'.

PERFORM bdc_field USING 'BDC_OKCODE' '/00'.

PERFORM bdc_field USING 'RV13A-KSCHL' wa509-condTyp.

PERFORM bdc_dynpro USING 'SAPMV14A' '0100'.

PERFORM bdc_field USING 'BDC_CURSOR' 'RV130-SELKZ(02)'.

PERFORM bdc_field USING 'BDC_OKCODE' '=WEIT'.

PERFORM bdc_field USING 'RV130-SELKZ(01)' ''.

PERFORM bdc_field USING 'RV130-SELKZ(02)' 'X'.

PERFORM bdc_dynpro USING 'SAPMV13A' '1509'.

PERFORM bdc_field USING 'BDC_CURSOR' 'RV13A-DATBI(01)'.

PERFORM bdc_field USING 'BDC_OKCODE' '=SICH'.

PERFORM bdc_field USING 'KOMG-VKORG' wa509-salesOrg.

PERFORM bdc_field USING 'KOMG-VTWEG' wa509-distCh.

PERFORM bdc_field USING 'KOMG-MATNR' wa509-matnr.

PERFORM bdc_field USING 'KOMG-ZZCLASS(01)' wa509-priClass.

PERFORM bdc_field USING 'KONP-KBETR(01)' wa509-rate.

PERFORM bdc_field USING 'KONP-KONWA(01)' wa509-priceUnit.

PERFORM bdc_field USING 'KONP-KMEIN(01)' wa509-uom.

PERFORM bdc_field USING 'RV13A-DATAB(01)' wa509-valFrom.

PERFORM bdc_field USING 'RV13A-DATBI(01)' wa509-valTo.

data:mode type c value 'N'.

refresh ibdcmsgcoll.

CALL TRANSACTION 'VK11' USING ibdcdata

MODE mode

UPDATE 'S'

MESSAGES INTO ibdcmsgcoll.

Re: BDC Recording HELP

Former Member — Thu, 16 Oct 2008 07:18:03 GMT

Every move u make in the recording, gets captured. So, try again.

And one more thing, after this:

PERFORM bdc_field USING 'BDC_OKCODE' '=SICH'.

you are passing internal table values..how come it will get updated??

if ok_code = sich, that means saving the data entered. So check that also...instead perform the recording again.

Regards,

Vishwa.

Edited by: Vishwa Sri Hari on Oct 16, 2008 12:50 PM

Re: BDC Recording HELP

Former Member — Thu, 16 Oct 2008 07:20:32 GMT

Hi...

I had made a BDC for VK11... there i had to choose Access No. 8.

the BDC format is as follows.

PERFORM BDC_DYNPRO USING 'SAPMV13A' '0100'.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'RV13A-KSCHL'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'/00'.

PERFORM BDC_FIELD USING 'RV13A-KSCHL'

'ZPR0'.

PERFORM BDC_DYNPRO USING 'SAPLV14A' '0100'.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'RV130-SELKZ(08)'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'=WEIT'.

PERFORM BDC_FIELD USING 'RV130-SELKZ(01)'

''.

PERFORM BDC_FIELD USING 'RV130-SELKZ(08)'

'X'.

((( HERE, ABOVE is the code which selects ACCESS No. 8.))))))

PERFORM BDC_DYNPRO USING 'SAPMV13A' '1554'.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'KONP-VALTG(01)'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'/00'.

PERFORM BDC_FIELD USING 'KOMG-VKORG'

'1000'.

WA_PC_VBAK-VKORG.

PERFORM BDC_FIELD USING 'KOMG-VTWEG'

'10'.

WA_PC_VBAK-VTWEG.

PERFORM BDC_FIELD USING 'KOMG-SPART'

'10'.

WA_PC_VBAK-SPART.

PERFORM BDC_FIELD USING 'KOMG-MATNR'

'CORNER'.

WA_PC_VBAP-MATNR.

PERFORM BDC_FIELD USING 'KOMG-KUNAG(01)'

'102657'.

WA_PC_VBAK-KUNNR.

PERFORM BDC_FIELD USING 'KONP-KBETR(01)'

' 555'.
WA_PC_KONV-KBETR.

KONV_KBETR.

PERFORM BDC_FIELD USING 'RV13A-DATAB(01)'

'30.05.2008'.

DATE.

PERFORM BDC_FIELD USING 'KONP-VALTG(01)'

'15'.

WA1_VBKD-VALTG.

PERFORM BDC_DYNPRO USING 'SAPMV13A' '1554'.

PERFORM BDC_FIELD USING 'BDC_CURSOR'

'KOMG-KUNAG(01)'.

PERFORM BDC_FIELD USING 'BDC_OKCODE'

'=SICH'.

CALL TRANSACTION 'VK11' USING BDCDATA MESSAGES INTO MESSTAB MODE 'A' UPDATE 'S'.

Re: BDC Recording HELP

abapdeveloper20 — Thu, 16 Oct 2008 07:26:10 GMT

Hi Krishnan,

I got that this part is doing that selection of radio button in the popup screen.

PERFORM bdc_dynpro USING 'SAPMV14A' '0100'.

PERFORM bdc_field USING 'BDC_CURSOR' 'RV130-SELKZ(02)'.

PERFORM bdc_field USING 'BDC_OKCODE' '=WEIT'.

PERFORM bdc_field USING 'RV130-SELKZ(01)' ''.

PERFORM bdc_field USING 'RV130-SELKZ(02)' 'X'.

when i run the bdc in the mode A , BDC is stopped atter the popup screen is called 'SAPMV14A' '0100'.

When i run in mode E , it comes to the popup screen

Pls suggest

Re: BDC Recording HELP

abapdeveloper20 — Thu, 16 Oct 2008 08:18:14 GMT

Hi,

My new recoreded code..

PERFORM bdc_dynpro USING 'SAPMV13A' '0100'.

PERFORM bdc_field USING 'BDC_CURSOR' 'RV13A-KSCHL'.

PERFORM bdc_field USING 'BDC_OKCODE' '/00'.

PERFORM bdc_field USING 'RV13A-KSCHL' wa509-condTyp.

PERFORM bdc_dynpro USING 'SAPMV14A' '0100'.

PERFORM bdc_field USING 'BDC_CURSOR' 'RV130-SELKZ(02)'.

PERFORM bdc_field USING 'BDC_OKCODE' '=WEIT'.

PERFORM bdc_field USING 'RV130-SELKZ(01)' ''.

PERFORM bdc_field USING 'RV130-SELKZ(02)' 'X'.

PERFORM bdc_dynpro USING 'SAPMV13A' '1509'.

PERFORM bdc_field USING 'BDC_CURSOR' 'RV13A-DATBI(01)'.

PERFORM bdc_field USING 'BDC_OKCODE' '/00'.

PERFORM bdc_field USING 'KOMG-VKORG' wa509-salesOrg.

PERFORM bdc_field USING 'KOMG-VTWEG' wa509-distCh.

PERFORM bdc_field USING 'KOMG-MATNR' wa509-matnr.

PERFORM bdc_field USING 'KOMG-ZZCLASS(01)' wa509-priClass.

PERFORM bdc_field USING 'KONP-KBETR(01)' wa509-rate.

PERFORM bdc_field USING 'KONP-KONWA(01)' wa509-priceUnit.

PERFORM bdc_field USING 'KONP-KMEIN(01)' wa509-uom.

PERFORM bdc_field USING 'RV13A-DATAB(01)' wa509-valFrom.

PERFORM bdc_field USING 'RV13A-DATBI(01)' wa509-valTo.

PERFORM BDC_DYNPRO USING 'SAPMV13A' '1509'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'KOMG-ZZCLASS(01)'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=SICH'.

data:mode type c value 'A'.

refresh ibdcmsgcoll.

CALL TRANSACTION 'VK11' USING ibdcdata

MODE mode

UPDATE 'S'

MESSAGES INTO ibdcmsgcoll.

Can anybody throw some thought on this...

Re: BDC Recording HELP

Former Member — Thu, 16 Oct 2008 08:21:21 GMT

Is this code working?? Where is the issue? I think it is capturing the Radio Button because:

PERFORM bdc_field USING 'RV130-SELKZ(01)' ''.
PERFORM bdc_field USING 'RV130-SELKZ(02)' 'X'. "here X means radio button is checked.

Regards,

Vishwa.

Re: BDC Recording HELP

abapdeveloper20 — Thu, 16 Oct 2008 08:31:11 GMT

Hi,

No it is not working...

PERFORM bdc_field USING 'RV130-SELKZ(02)' 'X'. "here X means radio button is checked.

yes.. this means the radio button option is selected.

when i run the same in shdb it is running as in the same order of recording.. but in programwith mode A it is not able select the 2nd radio button . it simply comes and stays in the screen.

Re: BDC Recording HELP

Former Member — Thu, 16 Oct 2008 08:33:55 GMT

OK. Are there only loop in the program or more than one? And can u attach the code along with loops?

Regards,

Vishwa.

Re: BDC Recording HELP

abapdeveloper20 — Thu, 16 Oct 2008 08:37:16 GMT

Solved..

there was error in typing the screen program name.

Thanks to all.