topic Re: Length ogf Internal Table in Application Development and Automation Discussions

Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:25:55 GMT

Hi,

I am using GUI_UPLOAD to upload the file from presentation server to my internal table. My problem is that the one of the records of testfile is 3000 in length. The internal table is not showing all the data from the testfile. is there any limitation to the record length of an internal table??

DATA: FILENAME(100) VALUE 'C:\testfile.txt',

G_FILE TYPE STRING.

DATA: BEGIN OF T_DATATAB OCCURS 0,

LINE(3000) type c,

END OF T_DATATAB.

G_FILE = FILENAME.

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

FILENAME = G_FILE

FILETYPE = 'ASC'

HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =

TABLES

DATA_TAB = T_DATATAB

EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

Regards,

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:28:16 GMT

if you are in 5.0 Version , you can give upto 32,000 chars.

if that is the case you can give.

thanks

vijay

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:30:05 GMT

Hi SB,

1. virtually for practical purposes there is no limit to the

length of internal table.

2. In ur case u can take it more than 3000 also.

3. It all depends upon the number of fields and their lengths.

4. Each record in text file is separated by ENTER / Line Carriage.

Check out the record which is not getting uploaded.

It must be more in length, or format may not be proper.

regards,

amit m.

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:30:51 GMT

i checked in 4.7 also,

if you give type lchr and you can give upto 32000.

data: text(32000) type lchr.

you can use.

vijay

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:34:08 GMT

Well if i am not wrong it is 4.7 , but still would like to from where do i get the version??

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:36:44 GMT

Hi again,

1. goto the menu :

SYSTEM-->STATUS

2. A new window will puopup

3. There will be a button besdies COMPONENT VERSION.

4. Press this button.

5. And u will get the different versions installed

of different software components ,

along with support package information

6. SAP_APPL

This is to be seen.

SAP_APPL means SAP Applications

(Logistics and Accounting)

7. SAP_HR is usually a different component.

regards,

amit m.

Message was edited by: Amit Mittal

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:36:59 GMT

if you go to menu <b>SYSTEM->STATUS</b>

there you can see the popup , in that check the component version.

in 4.7 you use lchr instead of type c

thanks

vijay

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:47:38 GMT

I was trying to get each line of the testfile as 1 record in the internal table. I am actually doing this for testing. I am uploading a file from presentation server to an internal table and then writing to the application server by using the command Open dataset for output .

Once I am able to send the correct testfile to the application server my second step in to read the application server file and submit it to RFBIBL00.

from your reply it looks that I should declare my internal exactly to the way the data in the testfile.txt.

so I tried using this

DATA: BEGIN OF T_DATATAB.

include structure bgr00.

include structure bbkpf.

include structure bbseg.

include structure bbtax.

data: END OF T_DATATAB.

But this gives an error saying the t_datatab-stype is already declared.

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:55:55 GMT

hi,

are you imitating lsmw direct input program.

don't include the all structures. only use the required fields which you are going to populate.,

thanks

vijay

check the below code..

*&---------------------------------------------------------------------*
*& Report  Z__DIRECT__MAT___CREAT                                      *
*&                                                                     *
*&---------------------------------------------------------------------*
*&                                                                     *
*&                                                                     *
*&---------------------------------------------------------------------*

REPORT  Z__DIRECT__MAT___CREAT                  .

INCLUDE Z_INCLUDE_MAT_CREAT.


************************************************************************
*  SELECTION SCREEN
************************************************************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-002.

PARAMETERS:P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1 .

************************************************************************
* AT SELECTION SCREEN
************************************************************************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.

  CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME  = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.


****************************************************
*START-OF-SELECTION
****************************************************
START-OF-SELECTION.

****************************************************
*Perform to upload the data from Presentation Server
****************************************************
  V_FILE = P_FILE.
  PERFORM UPLOAD_DATA.
*****************************************************
*Transfer the Data to the structure BGR00 BMMH1 BMM00
*****************************************************

  PERFORM CONVERT_0000.                                     " BGR00

  PERFORM POPULATE_DATA CHANGING BMM00.

  PERFORM POPULATE_DATA CHANGING BMMH1.
**Looping the flat file data and updating the structures BMM00 & BMMH1
  LOOP AT MATERIAL_MASTER.
*Writing the Data to the Application Server in a proper Format
    OPEN DATASET C_ZTEST FOR APPENDING IN  TEXT MODE ENCODING
    DEFAULT.
****************************************************
*Transfer the Data to the structure BMM00
****************************************************
    PERFORM CONVERT_0002.                                   " BMM00
****************************************************
*Transfer the Data to the structure BMMh1
****************************************************

    PERFORM CONVERT_0003.                                   " BMMH1
**Closing the dataset after transfering the data
    CLOSE DATASET  C_ZTEST.
  ENDLOOP.     "Endloop of MATERIAL_MASTER

****************************************************
*END-OF-SELECTION
****************************************************
END-OF-SELECTION.

**Calling the Direct Input Program to Create the material
  SUBMIT RMDATIND WITH %%%_R_P = C_X
                    WITH %%%_PHY = C_ZTEST
                    WITH SPERR = C_N.

*&---------------------------------------------------------------------*
*&  Include           Z_INCLUDE_MAT_CREAT                              *
*&---------------------------------------------------------------------*

**Tables Used To Create the Material
TABLES:
  BGR00,
  BMM00,
  BMMH1.

DATA:C_ZTEST(60) type c,
     C_X TYPE C,
     C_N TYPE C,
     V_file type string.

C_ZTEST = 'Ztest.lsmw.conv'(001).
C_X = 'X'(003).
C_N = 'N'(004).

**FILED SYMBOLS
FIELD-SYMBOLS: <F> .

**Structure to Hold the Flat File
data:
  begin of LSMW_MATERIAL_MASTER,
    MATNR(018) type C,  "Material number
    MTART(004) type C,  "Material type
    MBRSH(001) type C,  "Industry sector
    WERKS(004) type C,  "Plant
    MAKTX(040) type C,  "Material description
    DISMM(002) type C,  "Extra Field Added In the Program as it is required
    MEINS(003) type C,  "Base unit of measure
    MATKL(009) type C,  "Material group
    SPART(002) type C,  "Division
    LABOR(003) type C,  "Lab/office
    PRDHA(018) type C,  "Product hierarchy
    MSTAE(002) type C,  "X-plant matl status
    MTPOS_MARA(004) type C,  "Gen item cat group
    BRGEW(017) type C,  "Gross weight
    GEWEI(003) type C,  "Weight unit
    NTGEW(017) type C,  "Net weight
    GROES(032) type C,  "Size/Dimensions
    MAGRV(004) type C,  "Matl grp pack matls
    BISMT(018) type C,  "Old material number
    WRKST(048) type C,  "Basic material
    PROFL(003) type C,  "DG indicator profile
    KZUMW(001) type C,  "Environmentally rlvt
    BSTME(003) type C,  "Order unit
    VABME(001) type C,
    EKGRP(003) type C,  "Purchasing group
    XCHPF(001) type C,  "Batch management
    EKWSL(004) type C,  "Purchasing key value
    WEBAZ(003) type C,  "GR processing time
    MFRPN(040) type C,  "Manufacturer part number
    MFRNR(010) type C,  "Manufacturer number
    VPRSV(001) type C,  "Price control indicator
    STPRS(015) type C,  "Standard price
    BWPRH(014) type C,  "Commercial price1
  end of LSMW_MATERIAL_MASTER.

**InternalTable to HOld the Flat File Data
DATA:
  BEGIN OF MATERIAL_MASTER OCCURS 0.
        INCLUDE STRUCTURE LSMW_MATERIAL_MASTER.

DATA:
  END OF MATERIAL_MASTER.




*&--------------------------------------------------------------------*
*&      Form  upload_data From Presentation Server
*&--------------------------------------------------------------------*

FORM UPLOAD_DATA.
  CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = V_FILE
     FILETYPE                      = 'ASC'
     HAS_FIELD_SEPARATOR           = 'X'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*     CODEPAGE                      = ' '
*     IGNORE_CERR                   = ABAP_TRUE
*     REPLACEMENT                   = '#'
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    TABLES
      DATA_TAB                      = MATERIAL_MASTER
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
            .
  IF SY-SUBRC = 0.
    DELETE MATERIAL_MASTER INDEX 1.
  ENDIF.


ENDFORM.                    "upload_data

*&--------------------------------------------------------------------*
*&    Updating the BGR00 Structure
*&--------------------------------------------------------------------*

FORM CONVERT_0000.                                          " BGR00

**Opening the Data Set to write the data to Application Server
  OPEN DATASET C_ZTEST FOR OUTPUT IN  TEXT MODE ENCODING DEFAULT
  .

 MOVE: '0' TO BGR00-STYPE,
         'ZTEST' TO BGR00-GROUP,
         SY-MANDT TO BGR00-MANDT,
         SY-UNAME TO BGR00-USNAM,
         'X' TO BGR00-XKEEP,
         '/' TO BGR00-NODATA.
*Transefering the Data To the Application Server File
  TRANSFER BGR00 TO C_ZTEST.
*Closing the Dataset after Transfer
  CLOSE DATASET C_ZTEST.


ENDFORM.                    "convert_0001



*&--------------------------------------------------------------------*
*&     Updating BMM00 Structure
*&--------------------------------------------------------------------*

FORM CONVERT_0002.                                          " BMM00

* --- BMM00-STYPE
  BMM00-STYPE = '1'.

* --- BMM00-TCODE
  BMM00-TCODE = 'MM01'.

* --- BMM00-MATNR
  IF NOT MATERIAL_MASTER-MATNR IS INITIAL.
    BMM00-MATNR = MATERIAL_MASTER-MATNR.
  ELSE.
    BMM00-MATNR = '/'.
  ENDIF.
* --- BMM00-MBRSH
  IF NOT MATERIAL_MASTER-MBRSH IS INITIAL.
    BMM00-MBRSH = MATERIAL_MASTER-MBRSH.
  ELSE.
    BMM00-MBRSH = '/'.
  ENDIF.

* --- BMM00-MTART
  IF NOT MATERIAL_MASTER-MTART IS INITIAL.
    BMM00-MTART = MATERIAL_MASTER-MTART.
  ELSE.
    BMM00-MTART = '/'.
  ENDIF.


* --- BMM00-WERKS
  IF NOT MATERIAL_MASTER-WERKS IS INITIAL.
    BMM00-WERKS = MATERIAL_MASTER-WERKS.
  ELSE.
    BMM00-WERKS = '/'.
  ENDIF.


  BMM00-XEIB1 = 'X'.  " BMM00-xeib1 = '/'.

  BMM00-XEIE1 = 'X'.  " BMM00-xeie1 = '/'.

  BMM00-XEIK1 = 'X'.  " BMM00-xeik1 = '/'.

**Transfer the data to the Application Server File
  TRANSFER BMM00 TO C_ZTEST.

ENDFORM.                    "convert_0002

*&--------------------------------------------------------------------*
*&      UPdating BMMH1 Structure
*&--------------------------------------------------------------------*

FORM CONVERT_0003.                                          " BMMH1


* --- BMMH1-STYPE
  BMMH1-STYPE = '2'.

* --- BMMH1-MEINS
  IF NOT MATERIAL_MASTER-MEINS IS INITIAL.
    BMMH1-MEINS = MATERIAL_MASTER-MEINS.
  ELSE.
    BMMH1-MEINS = '/'.
  ENDIF.


* --- BMMH1-MAKTX
  IF NOT MATERIAL_MASTER-MAKTX IS INITIAL.
    BMMH1-MAKTX = MATERIAL_MASTER-MAKTX.
  ELSE.
    BMMH1-MAKTX = '/'.
  ENDIF.


* --- BMMH1-MATKL
  IF NOT MATERIAL_MASTER-MATKL IS INITIAL.
    BMMH1-MATKL = MATERIAL_MASTER-MATKL.
  ELSE.
    BMMH1-MATKL = '/'.
  ENDIF.


* --- BMMH1-BISMT
  IF NOT MATERIAL_MASTER-BISMT IS INITIAL.
    BMMH1-BISMT = MATERIAL_MASTER-BISMT.
  ELSE.
    BMMH1-BISMT = '/'.
  ENDIF.

* --- BMMH1-LABOR
  IF NOT MATERIAL_MASTER-LABOR IS INITIAL.
    BMMH1-LABOR = MATERIAL_MASTER-LABOR.
  ELSE.
    BMMH1-LABOR = '/'.
  ENDIF.



* --- BMMH1-WRKST
  IF NOT MATERIAL_MASTER-WRKST IS INITIAL.
    BMMH1-WRKST = MATERIAL_MASTER-WRKST.
  ELSE.
    BMMH1-WRKST = '/'.
  ENDIF.


* --- BMMH1-BRGEW
  IF NOT MATERIAL_MASTER-BRGEW IS INITIAL.
    BMMH1-BRGEW = MATERIAL_MASTER-BRGEW.
  ELSE.
    BMMH1-BRGEW = '/'.
  ENDIF.


* --- BMMH1-NTGEW
  IF NOT MATERIAL_MASTER-NTGEW IS INITIAL.
    BMMH1-NTGEW = MATERIAL_MASTER-NTGEW.
  ELSE.
    BMMH1-NTGEW = '/'.
  ENDIF.


* --- BMMH1-GEWEI
  IF NOT MATERIAL_MASTER-GEWEI IS INITIAL.
    BMMH1-GEWEI = MATERIAL_MASTER-GEWEI.
  ELSE.
    BMMH1-GEWEI = '/'.
  ENDIF.



* --- BMMH1-GROES
  IF NOT MATERIAL_MASTER-GROES IS INITIAL.
    BMMH1-GROES = MATERIAL_MASTER-GROES.
  ELSE.
    BMMH1-GROES = '/'.
  ENDIF.


* --- BMMH1-SPART
  IF NOT MATERIAL_MASTER-SPART IS INITIAL.
    BMMH1-SPART = MATERIAL_MASTER-SPART.
  ELSE.
    BMMH1-SPART = '/'.
  ENDIF.




* --- BMMH1-BSTME
  IF NOT MATERIAL_MASTER-BSTME IS INITIAL.
    BMMH1-BSTME = MATERIAL_MASTER-BSTME.
  ELSE.
    BMMH1-BSTME = '/'.
  ENDIF.


* --- BMMH1-EKWSL
  IF NOT MATERIAL_MASTER-EKWSL IS INITIAL.
    BMMH1-EKWSL = MATERIAL_MASTER-EKWSL.
  ELSE.
    BMMH1-EKWSL = '/'.
  ENDIF.


* --- BMMH1-EKGRP
  IF NOT MATERIAL_MASTER-EKGRP IS INITIAL.
    BMMH1-EKGRP = MATERIAL_MASTER-EKGRP.
  ELSE.
    BMMH1-EKGRP = '/'.
  ENDIF.


* --- BMMH1-XCHPF
  IF NOT MATERIAL_MASTER-XCHPF IS INITIAL.
    BMMH1-XCHPF = MATERIAL_MASTER-XCHPF.
  ELSE.
    BMMH1-XCHPF = '/'.
  ENDIF.


* --- BMMH1-WEBAZ
  IF NOT MATERIAL_MASTER-WEBAZ IS INITIAL.
    BMMH1-WEBAZ = MATERIAL_MASTER-WEBAZ.
  ELSE.
    BMMH1-WEBAZ = '/'.
  ENDIF.


  IF NOT MATERIAL_MASTER-DISMM IS INITIAL.
    BMMH1-DISMM = MATERIAL_MASTER-DISMM.
  ELSE.
    BMMH1-DISMM = '/'.
  ENDIF.



* --- BMMH1-VPRSV
  IF NOT MATERIAL_MASTER-VPRSV IS INITIAL.
    BMMH1-VPRSV = MATERIAL_MASTER-VPRSV.
  ELSE.
    BMMH1-VPRSV = '/'.
  ENDIF.

  BMMH1-VERPR = '/'.
* --- BMMH1-STPRS
  IF NOT MATERIAL_MASTER-STPRS IS INITIAL.
    BMMH1-STPRS = MATERIAL_MASTER-STPRS.
  ELSE.
    BMMH1-STPRS = '/'.
  ENDIF.

* --- BMMH1-BWPRH
  IF NOT MATERIAL_MASTER-BWPRH IS INITIAL.
    BMMH1-BWPRH = MATERIAL_MASTER-BWPRH.
  ELSE.
    BMMH1-BWPRH = '/'.
  ENDIF.


* --- BMMH1-PRDHA
  IF NOT MATERIAL_MASTER-PRDHA IS INITIAL.
    BMMH1-PRDHA = MATERIAL_MASTER-PRDHA.
  ELSE.
    BMMH1-PRDHA = '/'.
  ENDIF.


* --- BMMH1-VABME
  IF NOT MATERIAL_MASTER-VABME IS INITIAL.
    BMMH1-VABME = MATERIAL_MASTER-VABME.
  ELSE.
    BMMH1-VABME = '/'.
  ENDIF.


* --- BMMH1-MAGRV
  IF NOT MATERIAL_MASTER-MAGRV IS INITIAL.
    BMMH1-MAGRV = MATERIAL_MASTER-MAGRV.
  ELSE.
    BMMH1-MAGRV = '/'.
  ENDIF.


* --- BMMH1-KZUMW
  IF NOT MATERIAL_MASTER-KZUMW IS INITIAL.
    BMMH1-KZUMW = MATERIAL_MASTER-KZUMW.
  ELSE.
    BMMH1-KZUMW = '/'.
  ENDIF.


* --- BMMH1-MFRNR
  IF NOT MATERIAL_MASTER-MFRNR IS INITIAL.
    BMMH1-MFRNR = MATERIAL_MASTER-MFRNR.
  ELSE.
    BMMH1-MFRNR = '/'.
  ENDIF.


* --- BMMH1-MFRPN
  IF NOT MATERIAL_MASTER-MFRPN IS INITIAL.
    BMMH1-MFRPN = MATERIAL_MASTER-MFRPN.
  ELSE.
    BMMH1-MFRPN = '/'.
  ENDIF.

  BMMH1-MPROF = '/'.
* --- BMMH1-MSTAE
  IF NOT MATERIAL_MASTER-MSTAE IS INITIAL.
    BMMH1-MSTAE = MATERIAL_MASTER-MSTAE.
  ELSE.
    BMMH1-MSTAE = '/'.
  ENDIF.


* --- BMMH1-PROFL
  IF NOT MATERIAL_MASTER-PROFL IS INITIAL.
    BMMH1-PROFL = MATERIAL_MASTER-PROFL.
  ELSE.
    BMMH1-PROFL = '/'.
  ENDIF.


* --- BMMH1-MTPOS_MARA
  IF NOT MATERIAL_MASTER-MTPOS_MARA IS INITIAL.
    BMMH1-MTPOS_MARA = MATERIAL_MASTER-MTPOS_MARA.
  ELSE.
    BMMH1-MTPOS_MARA = '/'.
  ENDIF.


**Transfer the Data to Application Server File
TRANSFER BMMH1 TO C_ZTEST.


ENDFORM.                    "convert_0003

*&---------------------------------------------------------------------*
*&      Form  POPULATE_DATA
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
*      <--P_BLF text
*----------------------------------------------------------------------*
FORM POPULATE_DATA  CHANGING P_BLF.
  DATA: L_NUM TYPE I.
  DO.
    L_NUM = L_NUM + 1.
    ASSIGN COMPONENT L_NUM OF STRUCTURE P_BLF TO <F>.
    IF SY-SUBRC <> 0.
      EXIT.
    ENDIF.
    MOVE BGR00-NODATA TO <F>.
  ENDDO.

ENDFORM.                    " POPULATE_DATA

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 06:59:49 GMT

HI SB,

1. Declaring in this way,

may have duplicate fields,

hence, the error.

2. The important thing is

WHICH FIELDS, AND IN WHAT SEQUENCE,

does the text file contains ?

3. In that same sequence,

should we delcare the internal table,

for uploading purpose.

Regards,

amit m.

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 07:05:57 GMT

that is where I am getting stuck ... I am using RFBIBL00 and my testfile has the structures of BGR00, BBKPF,BBSEG,BBTAX ... and other way to get my testfile (complete file) to application server

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 07:10:12 GMT

Hi,

1. CG3Z

use the above tcode.

for transferring file from presentation server

to application server.

regards,

amit m.

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 07:14:15 GMT

Hi SB,

in that case you can go for CG3z transaction as suggested by Amit.

mention the path of application server it will upload to application server.

thanks

vijay

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 07:20:54 GMT

Hi Amit ,

even this tcode is tranferring the same amount of data as with my GUI_UPLOAD... I am not getting all the fields of BBSEG table...

Re: Length ogf Internal Table

Former Member — Fri, 06 Jan 2006 07:27:50 GMT

Hi again,

1. How is your text file ?

Is it TAB Separated ?

In fact make sure it is TAB Separated.

2. Also make sure there is this TAB field sepaarator

in between the fields of BBSEG

in the text file.

If it is not there, then it will consider

the whole line as ONE FIELD only.

3. It seems to be the problem in the format

of the text file data. Nothing else.

regards,

amit m.

Re: Length ogf Internal Table

Former Member — Wed, 16 Mar 2011 04:48:46 GMT

thanx